Bosch SMS2ITW11E Free Standing Dishwasher User Guide
BOSCH SMS2ITW11E Free Standing Dishwasher User Guide
Setting up Home Connect
Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.
- Install the Home Connect app on your mobile device and follow the instructions.
- Scan the QR code with the Home Connect app.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
A table of country-specific units can be found in the instruction manual.
Setting the water softening system
Programmes
The programme data has been measured in the laboratory according to European standard EN 60436.
The consumption figures depend on the programme and additional function selected.
The runtime will change if the rinse aid system is switched off or rinse aid needs to be added.
How to use your appliance
- Load the tableware.
Only clean tableware that is suitable for dishwashers.
Remove large remnants of food from the tableware. Check that the spray arms can rotate freely. - Add detergent.
- Switch on the appliance
- Select the programme.
- Start the programme start.
- Remove the tableware at the end of the programme.
- To cancel the programme, press reatart 4 sec. for approx. 4 seconds. The programme is cancelled and ends after approx. 1 minute.
Cleaning filters
Cleaning spray arms
Clean wastewater pump
Troubleshooting
6. Clean the filter.
7. Re-insert the filter in the supply hose.
8. Screw the water connection back on.
9. Check the water connection for leaks.
10.Restore the power supply.
11.Switch the appliance on.
Read More About This Manual & Download PDF: