Philips GC5030 Azur Elite Steam Iron User Manual

GC5030, GC5031
GC5032, GC5033
GC5034, GC5036
GC5037, GC5039

User manual

1. To use
2. Quick Calc Release (Specific types only)
3. Calc Clean (Specific types only)
4. To store

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Read this user manual and the important information leaflet carefully before you use the appliance. Save them for future reference.

Product Overview

1. Water tank lid
2. Display panel
3. Steam button
4. Calc-Clean / Quick Calc Release reminder light
5. Steam boost trigger
6. Mains cord
7. Cord winding
8. Calc-Clean button (specific types only)
9. Soleplate
10. Quick Calc Release (specific types only)

Exclusive technology from Philips

OptimalTEMP technology
The OptimalTEMP technology enables you to iron all types of ironable fabrics, in any order, without adjusting the iron temperature and without sorting your garments. It is safe to just rest the hot soleplate directly on the ironing board without putting it back on the iron platform. This will help reduce the stress on your wrist.
This iron has been approved by The Woolmark Company Pty Ltd for the ironing of woolly products, provided that the garments are ironed according to the instructions on the garment label and those issued by the manufacturer of this iron. R0000. The Woolmark symbol is a certification mark in many countries.

DynamiQ sensor
This appliance uses the most advanced sensor that detects your iron movement precisely and delivers intelligent steam release for perfect results. Our advanced sensor knows precisely how your iron is moving and when it’s standing still. Just switch to mode, and you’ll always have the perfect amount of steam when you need it to get rid of your wrinkles faster.

Turbo steam pump
We add a turbo steam pump in this appliance to boost up to 50% more steam directly through fabrics, so creases quickly disappear.

Using the appliance

Note: The iron may give off some smoke when you use it for the first time. This stops after a short while.

Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard water, fast-scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water to prolong the lifetime of the appliance.
Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting, brown staining or damage to your appliance.

Ironable fabrics

1. Check whether the garment is ironable by reading the label on the garment (Fig. 1-3).
   Do not iron non-ironable fabrics. Prints on the garment are not ironable either.

Steam settings

1. To change steam settings, tilt the iron up slightly (about 20 degrees and more), and press the steam button on top of the handle (Fig. 1-5)

Note: All steam settings are equipped with OptimalTEMP technology and are safe to use on all ironable fabrics.

• (iQ setting) (Fig. 1-6): enabled by the DynamiQ sensor, the perfect amount of steam is produced automatically when needed during the movement of the iron. Steam stops when the iron is not moved or put to a vertical position.
  It is recommended to use the setting for ultimate convenience on all garments.
• MAX (MAX setting) (Fig. 1-7): maximum constant steam is delivered continuously for stubborn creases. For best results on tough fabrics such as cotton, jeans, and linen, it is recommended to use the MAX setting. Steam stops when the iron is put in a vertical position.
• ECO (ECO setting) (specific types only) (Fig. 1-8): minimum constant steam is delivered continuously for garments with fewer creases. This setting also saves energy. Steam stops when the iron is put in a vertical position.
• IONIC (ionic setting) (specific types only) (Fig. 1-9): deep and powerful ionic steam bursts are produced for more hygienic ironing.
• (steam offsetting) (Fig. 1-10): select this setting to iron without steam.

Tip: In any steam setting, you can press the steam button during ironing for more steam.

Auto shut-off
The safety auto-off function automatically switches off the appliance if it has not been used for 2 minutes resting on its soleplate or 8 minutes resting on its backplate. The display panel flashes to indicate the appliance is at auto-off status. To let the appliance heat up again, pick up the appliance or move it slightly. The display panel turns to breathe and the appliance starts to heat up.

Cleaning and maintenance

For more information on how to perform cleaning and maintenance on the iron, refer to the videos at this link: http://www.philips.com/descaling-iron.

Cleaning the soleplate 1 Unplug the appliance and let it cool down. 2 Pour any remaining water out of the water tank. 3 Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. Note: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar, or other chemicals to clean the soleplate.

Cleaning the soleplate

1. Unplug the appliance and let it cool down.
2. Pour any remaining water out of the water tank.
3. Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent.

Note: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar, or other chemicals to clean the soleplate.

Quick Calc Release (specific types only)
IMPORTANT: The Quick Calc Release automatically collects loose scale particles during ironing. After 1 to 3 months of use, the Calc-Clean reminder light starts flashing to remind you to use the Quick Calc Release function (Fig. 2-1). This is to remove scales collected from your iron to prolong its life. When the Calc-Clean reminder light is flashing, the iron does not heat up.
Tip: The Quick Calc Release function can be used at any time, even when the reminder light is not activated yet. If you live in a hard water area, use the function more
frequently.
Do not perform the Quick Calc Release when the iron is hot. Do not pour water into the Quick Calc Release opening.

1. Unplug the appliance (Fig. 2-2) and make sure that the appliance is cool (Fig. 2-3).
2. Hold the appliance in a vertical position over the sink.
3.  Flip-up the lever of the Quick Calc Release collector (Fig.2-4) and pull out the collector 1 Unplug the appliance (Fig. 2-2) and make sure that the appliance is cool (Fig. 2-3).
   2 Hold the appliance in a vertical position over the sink.
   3 Flip up the lever of the Quick Calc Release collector (Fig.2-4) and pull out the collector
   (Fig.2-5).
   4 Clean the Quick Calc Release collector with water (Fig. 2-6, Fig. 2-7).
   5 Gently shake the appliance to allow scale particles to fall out (Fig. 2-8).
   6 Insert the Quick Calc Release collector back into the appliance (Fig. 2-10).
   7 Push down the lever (“click”) to lock the collector (Fig. 2-11).
   (Fig.2-5).
4.  Clean the Quick Calc Release collector with water (Fig. 2-6, Fig. 2-7).
5. Gently shake the appliance to allow scale particles to fall out (Fig. 2-8).
   6 Insert the Quick Calc Release collector back into the appliance (Fig. 2-10).
   7 Push down the lever (“click”) to lock the collector (Fig. 2-11).

Cleaning the soleplate

1;.Unplug the appliance and let it cool down. 2 Pour any remaining water out of the water tank. 3 Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent.
+Note: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar, or other chemicals to clean the soleplate.

Calc-Clean (specific types only)
IMPORTANT: After 1 to 3 months of use, the Calc-Clean reminder light starts flashing to remind you to use the Calc-Clean function (Fig. 3-1). This is to remove scales in your iron to prolong its life.
Tip: The Calc-Clean function can be used at any time, even when the reminder light is not activated yet. If you live in a hard water area, use the function more frequently.

1. Make sure that the steam slider is set to the “steam off” position.
2. Make sure there is enough water (more than 3/4) in the water tank. If there is not enough water, unplug the iron, fill the water to MAX indication (Fig.3-2) and plug in the iron again (Fig.3-3).
   Do not pour vinegar or other descaling agents into the water tank.
3. Wait for the iron to heat up. This takes about 2 minutes (Fig.3-3).
   Note: the Calc-Clean reminder light turns off during heating up.
4. Unplug the iron when the ‘iron ready’ light stops breathing (Fig. 3-4).
5. Hold the iron over the sink. Keep pushing the Calc-Clean button and gently shake the iron forth and back until all water in the water tank has been used up (Fig. 3-5).
   Scales are flushed out, and steam and boiling water also come out of the soleplate.
   Note: Repeat steps 2 to 5 if the water that comes out of the appliance still contains scale particles.
6. Plugin the appliance and let the appliance heat up to dry the soleplate. This takes about 2 minutes (Fig.3-6).
7. Unplug the appliance. Move the appliance gently over a piece of cloth to remove any water stains on the soleplate (Fig. 3-7).

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions, or contact the Consumer Care Centre in your country.

© 2017 Koninklijke Philips N.V.
All rights reserved.
4239 001 08493