Lenovo L29w-30 display control center Artery Installation Guide
Lenovo L29w-30 display control center Artery Installation Guide
Safety information
To avoid shock hazard
- Do not remove the covers.
- Do not operate this product unless the stand is attached.
- Do not connect or disconnect this product during an electrical storm.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.
- To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.
Handling:
- If your monitor weighs more than 18kg(39.68 lb),it is recommended that it be moved or lifted by two people.
Whats In the Box
Installation Instruction
The drivers, documentations and warranty information for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/l29w_30 or scan QR code
Important Battery Recycling and WEEE information
Don’t dispose of your product or battery with your household waste. Refer to the Compliance Guide that came with your product for further information. or go to https://www.lenovo.com/recycling
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
EU product database for energy label and product information sheet L29w-30: https://eprel.ec.europa.eu/qr/789022
Lenovo L29w-30 supports
Lenovo Display Control Center – Artery.
