LG SP9YT 520W 5.1.2 Soundbar User Manual
Wi-Fi SOUND BAR
SOUND BAR & TV
- Replacement of
- Battery Byta batteri
- Udskiftning af batteri
- Batteribytte
- Akun vaihto
SOUND BAR & TV + LG WOWCAST
If you use LG WOWCAST for connection, connect an external device to the TV.
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.
- Sound bar
- Remote Control Receiver / Status Display
- Rear Speakers / Wireless Receiver (Sold separately, SPK8-S)
- Wireless Subwoofer – Install it close to the sound bar.
- External Device – (Blu-ray player, game console, etc.)
- LG WOWCAST (WTP3)
- Select one of the following methods to connect the sound bar to a TV. If you use two or more methods at the same time, the product may malfunction.
- Connect using an HDMI cable.
- Connect using an optical cable.
- Connect using LG WOWCAST. (LG WOWCAST only transmits audio signals. If you turned off the sound bar by pulling its power
- If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable. If you use LG WOWCAST for connection, connect an external device to the TV.
- If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of each speaker.
- Connect to power in the following order: wireless subwoofer [ wireless receiver [ sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and the wireless receiver will light up in green.
- Using the product with your TV
- Press the Function
- On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
- When the TV is properly connected to the product, “OPT”, “ARC”, or “E-ARC” will appear on the status display or “LG WOWCAST” scrolls once and then “ARC” or “E-ARC” will appear on the status display. You can listen to TV sounds with the sound bar.
- Press the Function
- Connecting the product to your smartphone via Wi-Fi
- Connect your smartphone to Wi-Fi.
- Install the LG Sound Bar app on Google Play or the App Store.
- Run the LG Sound Bar app and follow the instructions.
- The product will connect to your smartphone and you can control the product with LG Sound Bar app.
- Connecting the product to your smartphone via Bluetooth
- Tap the Settings
- Press the Bluetooth pair
- Find and tap “LG_Speaker_SP9YT_XXXX” or the name you registered on the Google Home app.
- When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” [“Connected Bluetooth device name” [ “BT”.
- Tap the Settings
If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
- Press the Power
- Press the PAIRING (Pairing) button on the back of the disconnected wireless subwoofer or wireless receiver. Check if each LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
- Press the Power
- When the connection is established, you will see a green LED light on the back of the wireless subwoofer or on the front of the wireless receiver light up in green.
Keep the sound bar, the subwoofer and wireless receiver away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.- Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
- Design and specifications are subject to change without notice.
- Google Play is a trademark of Google LLC.
Sound bar specifications Power requirements
- Refer to the main label.
Power consumption - Refer to the main label.
- Standby power: < 0.5 W Dimensions (W x H x D): Approx. 1220.0 mm x 57.0 mm x 145.0 mm Amplifier (Total RMS Output power): 520 W RMS
How to deactivate the wireless network connection(s).
Press and hold the Power button for 3 seconds or longer to turn off the product.
LG WOWCAST specifications
Power requirements - Refer to the main label.
Power consumption - Refer to the main label. Dimensions (W x H x D): 65.0 mm x 13.0 mm x 85.0 mm It is recommended that you use the 5 V AC adapter (more than 0.5 A) with this device.
CAUTION when using this product in environments of low humidity. - It may cause static electricity in environments of low humidity.
- It is recommended to use this product after touching any metal object which conducts electricity. Before attaching LG WOWCAST to the TV, wipe the area to be attached with cloth such as gauze. When attaching LG WOWCAST to the TV, make sure not to block ventilation holes of the TV.
OPEN-SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that is contained in this product, please visit https://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected] This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.