LG 32SM5J Digital Signage Smart LED Monitor Owner’s Manual

LG 32SM5J Digital Signage Smart LED Monitor

BASIC

NOTE

  • The accessories provided with your product may vary depending on the model or region.
  •  Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
  •  SuperSign Software & Manual
  • Visit http://partner.lge.com to download the latest SuperSign software and manual.

Checking the Accessories

Checking the Optional Accessories

In order to improve product performance, optional accessories are subject to change without prior notice. The illustrations in this manual may differ from the actual product and its accessories. Refer to the product manual for the components of the optional accessories.

Learning the Buttons
The illustrations may differ depending on the model.

  •  INPUT Changes the input signal.
  • MENU Opens the main menu or saves the input selection and exits the menu.
  •  Adjusts up and down.
  •  Moves left or right.
  •  AUTO/SET Shows the signal and mode information currently set and allows the user to select a menu.
  • Turns the power on and off.

GETTING READY

Connecting the IR Sensors
Connecting the cable to the product allows it to receive signals from the remote control. Rotate the IR sensor according to horizontal or vertical use. The illustrations may differ depending on the model.

Default Mount – Horizontal Use

Vertical Use

Mounting and Removing the LG Logo Bracket

  • Applies only to some models.
  •  The illustrations may differ depending on the model.

Removing the LG Logo Bracket
Place a clean cloth on the floor, and remove one screw from the LG logo bracket on the lower back of the monitor with a screwdriver.

  • Mounting the LG Logo Bracket on the Right
  • Screw the LG logo bracket into the hole on the right

Assembling the Memory Cover

After attaching the USB memory, use a screw to assemble the cover, as shown in the illustration, to prevent theft.

Kensington Lock Device

(This feature applies only to some models.) The Kensington lock device connector is located on the back of the monitor. For more information on installation and use, refer to the user manual provided with the locking device. Connect the Kensington security system cable between the monitor and a table.

NOTE

  • The Kensington lock device is an optional specification.
  •  This is a general illustration of installation and may look different from the product held by the customer.

CHECKING BEFORE INSTALLATION

We are not responsible for product damage caused by failure to follow the guide.

Installation Orientation

Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.

Tilt Angle

Ceiling, Floor Orientation

Installation Location

We are not responsible for product damage caused by failure to follow the guide.

Indoor

Installing on a Wall

  • A : 40 mm or more
  •  The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.

Installing on a Recessed Wall

  • A : 40 mm or more
  • B : 50 mm or more
  • C : 70 mm or more
  • The warranty will not cover any damage caused by using the product in direct sunlight on the front panel

Outdoor

Outdoor Enclosed

Wall Mount Holder

  • To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
  • Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
  • The VESA dimensions of the wall mount by model are as follows
    Model VESA Dimensions (A x B) (mm) Standard Dimensions Length (Maximum) (mm) Quantity
    32SM5J 200 x 200 M6 21.3 4

    CAUTION

    •  Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
    •  If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
    •  Damage to the monitor by tightening the screws too tightly may void your warranty.
    •  Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.

    NOTE

    •  Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
    •  For more information on installation, please refer to the user manual for the wall mount.

    PRECAUTIONS FOR USE

    Dust
    The warranty will not cover any damage caused by using the product in an excessively dusty environment.

    Afterimage

    •  After-image appears when the product is turned off.
    •  Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screensaver function.
    •  Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product.
    • When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.
    •  Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.
    •  Recommended Usage Condition
    •  Change the background colour and text colour at equal intervals.
    • Afterimages occur less when the colours to be changed are complementary to one another.
    • Switch the screen at equal time intervals.
    •  Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.

    PRODUCT SPECIFICATIONS

    Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

    Input/Output Ports HDMI1, HDMI2, HDMI3, IR & LIGHT SENSOR,

    AUDIO OUT, LAN IN, RS-232 IN/OUT, USB 2.0 IN

    Resolution Recommended Resolution 1920 x 1080 @ 60 Hz (HDMI1, HDMI2, HDMI3)
    Max Resolution
    Power Voltage AC 100-240 V ~ 50/60 Hz 0.8 A
     

     

    Environmental Conditions

    		 Operating Temperature

    Operating Humidity

    		 0 °C to 40 °C

    10 % to 80 % (Condition for preventing condensation)

    Storage Temperature Storage Humidity -20 °C to 60°C

    5 % to 85 % (Condition for preventing condensation)

    * Product box packaging storage conditions

    Audio Input Sensitivity 0.7 Vrms
    Power Consumption On Mode 55 W (Typ.)
    Sleep Mode / Standby Mode ≤ 0.5 W
    Model Name Size (Width x Height x Thickness) (mm) Weight (kg)
    32SM5J Head 729.4 x 428.9 x 55.5 5.7
    Head + Stand 729.4 x 481 x 154.2 6.5

    HDMI (PC) Support Mode

     

    NGLISH

    		 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Note
    800 x 600 37.879 60.317  
    1024 x 768 48.363 60  
    1280 x 720 44.772 59.855  
    1280 x 1024 63.981 60.02  
    1680 x 1050 65.29 59.954  
    1920 x 1080 67.5 60  

    HDMI (DTV) Support Mode

    Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Note
    480/60p 31.5 60  
    576/50p 31.25 50  
    720/50p 37.5 50  
    720/60p 45 60  
    1080/50i 28.1 50  
    1080/60i 33.75 60  
    1080/50p 56.25 50  
    1080/60p 67.432 59.94  
    1080/60p 67.5 60  
    Wireless module (LGSBWAC92) Specifications  

    ENGLISH

    Wireless LAN (IEEE 802.11a/b/g/n/ac)
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5

    5150 to 5725

    5725 to 5850

    		 18

    18

    12

    Bluetooth
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5 8
    • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
    •  For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

    Only Nigeria)
    Connection and use of this communication equipment is permitted by the Nigerian Communications Commission.

    (Only Hong Kong)

    Wireless module (LGSBWAC92) Specifications
    Wireless LAN (IEEE 802.11a/b/g/n/ac)
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5

    5150 to 5350

    5725 to 5850

    		 18

    18

    12

    Bluetooth
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5 8
    •  As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
    •  For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

    (Only Vietnam)

     

    NGLISH

    		 Wireless module (LGSBWAC92) Specifications
    Wireless LAN (IEEE 802.11a/b/g/n/ac)
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5

    5150 to 5350

    5725 to 5850

    		 17.5

    17.5

    12

    Bluetooth
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5 8
    •  As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
    •  For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

    (Only Philippines)

    Wireless module (LGSBWAC92) Specifications
    Wireless LAN (IEEE 802.11a/b/g/n/ac)
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5

    5150 to 5725

    5725 to 5850

    		 18

    18

    18

    Bluetooth
    Frequency range (MHz) Output power (Max.) (dBm)
    2400 to 2483.5 8
    • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
    •  For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
    •  FCC ID: BEJLGSBWAC92 / IC: 2703H-LGSBWAC92

    LICENCE

    Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.

    Bluetooth

    The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.