LG DSP7 5.1 Soundbar With 440 Watts And Wireless Subwoofer Owner’s Manual

LG DSP7 5.1 Soundbar With 440 Watts And Wireless Subwoofer Owner’s Manual

What In The Box

Connection

Replacement Of Battery

  • Replacement of Battery

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

  • Sound bar
  • Remote Control Receiver / Status Display
  • Wireless Subwoofer – Install it close to the sound bar.
  • External Device – (Blu-ray player, game console, etc.)
  1. Connect the sound bar to your TV via an optical cable or an HDMI cable. 
  2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
  3. Connect to power in the following order: wireless subwoofer sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LED on the wireless subwoofer will light up in green.
  4. Using the product with your TV 
    • Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
    • On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
    • When the TV is properly connected to the product, “OPT” or “ARC” appears on the status display with a sound.
  5. Connecting the product to your smartphone via Bluetooth 
    • Tap the Settings button on your smartphone and select   Bluetooth. Turn on the Bluetooth function. ( Off > On)
    • Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
    • Find and tap the product on your smartphone. The product appears as “LG DSP7 (XX)”.
    • When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED”   “Connected Bluetooth device name”  “BT
  6. Connecting to the LG Sound Bar app 
    • Find and install the LG Sound Bar app on Google Play or App Store from your smartp.
    • You can get more information regarding its use by selecting [Help] in [Setting].

 If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the case, connect them in the following order. 

  1. Press the Power button on the sound bar to turn it off.
  2. Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
    • If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
  3. Press the Power button on the sound bar to turn it on.
  4. When the connection is established, you will see a green LED light on the back of the wireless subwoofer.

Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

  • Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
  • Design and specifications are subject to change without notice.
  • Google Play is a trademark of Google LLC.

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body

Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
5730 to 5821 MHz 13 dBm

Specification

Power consumption 

  • Refer to the main label.
  • Networked standby: 1.5 W (If all network ports are activated.)
    AC adapter
  • Model: DA-50F25
  • Manufacturer: Asian Power Devices Inc.
  • Input: 100 – 240 V ~ 50 – 60 Hz
  • Output: 25 2 A
  • Model: MS-Z2000R250-050D0-P
  • Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
  • Input: 100 – 240 V ~ 50/60 Hz
  • Output: 25  2 A

Dimensions (W x H x D): Approx. 1000.0 mm x 63.0 mm x 105.0 mm
Bus Power Supply (USB): 5500 mA
Amplifier (Total RMS Output power): 440 W RMS
How to disconnect the wireless network connection or the wireless device

Set up the Auto Power function to off and turn off the product.

OPEN SOURCE SOFTWARE NOTICE INFORMATION 

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit https://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]  This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.