LG 32LP500BPTA 32-Inch LED HD TV Owner’s Manual

OWNER’S MANUAL
Safety and Reference
LED TV*

* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.

www.lg.com
Copyright © 2021 LG Electronics Inc.
All Rights Reserved.

Before reading this manual

• Read this manual thoroughly before operating your TV, and keep it for future reference.
• On the website, you can download the manual including installation, using, troubleshooting, specifications, license, etc, and view its contents on your PC or mobile device.

Separate Purchase

• Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
• The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances, or policies.
• A cable to connect antennas and external devices must be purchased separately.

Note

• Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
• The items supplied with your product may vary depending on the model.
• The image shown may differ from your TV.

Warning! Safety instructions

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated”dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• Do not place the TV and/or remote control in the following environments:
  – Keep the product away from direct sunlight.
  – An area with high humidity such as a bathroom.
  – Near any heat source such as stoves and other devices that produce heat.
  – Near kitchen counters or humidifiers that can easily be exposed to steam or oil.
  – An area exposed to rain or wind.
  – Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
  – Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
  – Do not install in excessively dusty places.
  Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation.
• Ventilation
  – Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
  – Do not install the product on a carpet or cushion.
  – Do not block or cover the product with cloth or other materials while the unit is plugged in.
• Take care not to touch the ventilation openings. When watching TV for a long period, the ventilation openings may become hot.
• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
• Do not move the TV whilst the Power cord is plugged in.
• Do not use a damaged or loosely fitting power cord. · Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.
• Disconnecting the Device from the Main Power
  – The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
• Do not let your children climb or cling to the TV. Otherwise, the TV may fall over, which may cause serious injury.
• Outdoor Antenna Grounding (Can differ by country):
  – If an outdoor antenna is installed, follow the precautions below.
  An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
• Grounding (Except for devices that are not grounded.)
  – A TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth-ground wire to prevent possible electric shock.
• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.
• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact customer service
• Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
• If any of the following occur, unplug the product immediately and contact your local customer service.
  – The product has been damaged.
  – If water or another substance enters the product (like an AC adapter, power cord, or TV).
  – If you smell smoke or other odors coming from the TV.
  – When lightning storms or when unused for long periods of time.

Even if the TV is turned off by remote control or button, the AC power source is connected to the unit if not unplugged in

• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
• Use only authorized attachments/accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe the dust off
• Batteries
  – Store the accessories (battery, etc.) in a safe location out of the reach of children.
  – Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
  – Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
• Moving
  – When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
• Do not allow an impact shock, or any objects to fall into the product, and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
• Cleaning
  – When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Preparing

Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and all cables.
  
• When holding the TV, the screen should face away from you to avoid damage.
  
• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
  
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the following illustration.
• When transporting the TV, do not expose the TV to jolts or excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt it towards the left or right.
• Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage the screen.
• When handling the TV, be careful not to damage the protruding buttons.
• Avoid touching the screen at all times, as this may result in damage to the screen.
• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1. Lift and tilt the TV into its upright position on a table.
   Leave a 10 cm (minimum) space from the wall for proper ventilation.
2. Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
•  If you install the TV on a stand, you need to take action to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
•  Do not use any unapproved items to ensure the safety and product life span.
• Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty.
• Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
• Do not use too much force and over-tighten the screws; otherwise, the screw may be damaged and not tighten correctly.
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling.
• Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• – Use cabinets or stands recommended by the manufacturer of the television.
  – Only using furniture that can safely support the television.
  – Ensuring the television is not overhanging the edge of the supporting furniture.
  – Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
  – Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
  – Educating children about the dangers of climbing on furniture to reach the television or its controls.

Securing TV to the Wall

1. Insert and tighten the eye bolts or TV brackets and bolts on the back of the TV.
   If there are bolts inserted at the eye-bolts position, remove the bolts first.
2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye bolts on the rear of the TV.
3. Connect the eye bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.
• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Mounting to the Wall
Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. Please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.
(Depending on model)

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
• For more information on screws and wall mount brackets, refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.
• When you install the set use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model)

(Depending on model)

Wall Mounting Bracket

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 ).

• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve the image quality.
• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.

Starting TV

Turning on the TV
You can simply operate the TV functions, using the button.
Using button
Power On (Press)
Power Off (Press)

Note

• If the TV is turned on for the first time after it was shipped from the factory, the initialization of the TV may take a few minutes.

Adjusting the menu

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning the on/off button, turning off the device, and unplugging the power cord.

Inserting the battery

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover.

•   Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
• This apparatus uses batteries. In your community, there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
• Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.
• In Analogue TV and some countries, some remote control buttons may not work.

Using Remote Control

Using Remote Control
(Some buttons and services may not be provided depending on models or regions.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.

HDMI

• When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
• Supported HDMI Audio format (Depending on model): Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI Cable Types
  -Ultra High-Speed HDMI®/TM cable (3 m or less)

USB 
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.
Note

• For an optimal connection, HDMI cables should have bezels less than 10 mm thick and 18 mm width. USB devices should have bezels less than 8 mm thick and 18 mm wide. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

* A <= 10 mm
* B <= 18 mm
* C <= 8 mm
External
Available external devices are Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
Note

1. The external device connection may differ from the model
2. Connect external devices to the TV regardless of the order of the TV port.
3. If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
4. Refer to the external equipment’s manual for operating instructions.
5. If you connect a gaming device to the TV, use the cable supplied with the gaming device.
6. In PC mode, some resolution settings may not work properly depending on the graphics card.

Settings

Automatically Setting Up Programme
(Settings) [Auto Tuning]
Automatically tunes the programs.;

• If Input Source is not connected properly, program registration may not work.
• [Auto Tuning] only finds programs that are currently broadcasting.
• If [System Lock] is turned on, a pop-up window will appear asking for a password
• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus.

To select Picture Mode’
(Settings)  [Picture Mode]
Select the picture mode optimized for the viewing environment or the program.

1. [Dynamic]: Optimizes the video image for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue.
2. [Standard]: Displays images in standard levels of contrast, brightness, and sharpness.
3. [Mild]: Displays images in Mild levels of contrast, brightness, and sharpness.
4. [Personal]: Displays images in Personal mode. Users can adjust the contrast, brightness, and sharpness as they like.

Fine-tuning Picture Mode
(Settings)…
This feature allows you to adjust the selected picture mode in detail. · [Picture Mode]: Adjusts the picture setting that best suits your viewing environment.

• [Colour Temp]: Adjusts the color temperature of the picture.
• [Noise Reduction]: This setting reduces picture”static” or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions.
• [Aspect Ratio]: Select the picture size.
• [HDMI Mode]: Press to select HDMI Mode, options include Auto, Video, and PC. Only available in HDMI Source.

To adjust the Aspect Ratio
(  Settings) [Aspect Ratio]

Selects the screen aspect ratio.

• [Auto]: Detect the source signal aspect ratio and displays an aspect ratio automatically.
• – If can’t detect the source signal aspect ratio, the TV will set the aspect ratio to 16:9.
• [4:3]: Displays an aspect ratio of 4:3. · [16:9]: Displays an aspect ratio of 16:9.
• [Zoom1]: Scale up to a certain aspect ratio in Horizontal and Vertical.
• [Zoom2]: Scale up to a certain aspect ratio in Horizontal and Vertical.

To set Noise Reduction
(Settings)  [Noise Reduction]

Select the right model to match the pictures.
To select Sound Mode
(Settings) [Sound Mode]
Adjusts TV audio to an optimal level based on a selected sound mode.

• [Standard]: Selects the normal sound mode.
• [Music]: Provides clear and live sound for music.
• [Movie]: Provides live and full sound for movies.
• [Sports]: Emphasizes bass over other sounds.
• [Personal]: User can adjust the sound parameters as you like.

To adjust the auto volume limit
(Settings)  [Auto Volume]
Adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. To adjust AD (audio description) Switch
(Settings) [AD Switch]
Adjust the proportion of audio description. AD Switch is on, you can set the volume ratio in DTV mode. A bigger value means higher audio description volume.
To set Language
(Settings) [OSD Language]
You can select the language of the menu displayed on the screen. To set OSD Time (Settings) [OSD Timer] Set the preferred amount of time for the OSD to be displayed on the screen.
To set the current time
(Settings) [Clock]
Checks or changes the time while watching TV.
To specify Factory Reset
(Settings) [Reset]
Won’t reset [System Lock]/[Key Lock]. TV turns itself off and back on, and all settings are reset.

• When [System Lock] is in place, a pop-up window appears and asks for a password.
• Do not turn off the power during initialization.

To lock system
(Settings) [System Lock]
Permits only specific programs by blocking programs or external input. First set [System Lock] to [On].

• [Change Password]: Sets or changes the TV password. The initial password is set to`0000′.
• [Parental Guidance]: Blocks programs with content inappropriate for children. Programs can be selected but the screen is blank and the audio is muted. To watch a locked program, enter the password.

To use Manual Tuning
(Settings) [DTV Manual Tuning] / [ATV Manual Tuning]
Adjusts programs manually and saves the results. For digital broadcasting, signal strength and signal quality can be checked. For analog broadcasting, you can set up station names and use fine tuning (except for Satellite mode). Normally fine tuning is only necessary if reception is poor.
To update the software
(Settings) [Software Update (USB)]
Copy the new software to a USB storage on TV to update the software.
To use My Media
Connect the USB storage device to the TV’s USB 2.0 terminal.
Selects a file from the list. Displays the file that you choose.
Sets play-related settings by checking the option during disk playback.
Using a USB storage device – warning 

• If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work.
• Some USB storage devices may not work or may work incorrectly.
• Use only USB storage devices formatted with the Windows FAT16, FAT32 or NTFS File System.
• For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.
• It is recommended that you use USB memory sticks of 32 GB or less and USB HDDs of 2 TB or less.
• If a USB HDD with a power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD.
• Data in the USB storage device can be damaged, so be sure to back up important files to other devices. Data maintenance is the user’s responsibility and the manufacturer is not responsible for data loss.

Troubleshooting

• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel. (Depending on model)
  
• Make sure to wring any excess water or cleaner from the cloth.
• Do not spray water or cleaner directly onto the TV screen.
• Make sure to spray just enough water or cleaner onto a dry cloth to wipe the screen.

Specifications

Broadcasting Specifications

Environment condition

HDMI supported mode

Licenses

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.

Regulatory

WARNING! (STABILITY HAZARD)
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
– ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
– ALWAYS use furniture that can safely support the television set.
– ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
– ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
– ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
– NEVER place a television set in an unstable location.
– NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
– NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
– NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Symbols

(Only Jordan)
WEEK
Disposal of your appliance
The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.

(For Saudi Arabia]

1. All batteries should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
2. The correct disposal of your old batteries will help to prevent potential negative consequences for the environment, animal and human health.
3. For more detailed information about the disposal of your old batteries, please contact your city office, waste disposal service or the shop where you purchased the product. Also, You can contact our LG Support Representative Call center below Link https://www.Ig.com/sa_en/supportkontact/telephone

The model and a serial number of the product are located on the back and on one side of the product. Record them below in case you ever need serviceFor any Suggestions,
Model…………………………………………….
Serial No…………………………………………..

Opinions, or Complaints,
Please Call 800 54 in UAE
0800 545454 in South Africa
080 100 54 54 in Morocco
19960 in Egypt
021 36 54 54 in Algeria
In other countries, please contact our local dealer or log into http://www.lg.com