LG DQP5W Wireless Sound Bar Owner’s Manual

SIMPLE MANUAL
WIRELESS SOUND BAR

WIRELESS SOUNDBAR
DQP5W / DQP5

MFL71810904
2105_Rev01

www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.

Replacement of Battery

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

https://www.lg.com/global/ajax/common_manual

A Sound bar
B Remote Control Receiver /Status LED (Refer to below table)
C Wireless Subwoofer – Install it close to the sound bar.
D External Device – (Blu-ray player, game console, etc.)
Power on Standby OPTICAL /
HDMI ARC
Bluetooth
ready
Bluetooth HDMI IN USB
Red blinking Red White Blue blinking Blue White White
  1. Connect the sound bar to your TV via an optical cable or an HDMI cable.
  2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
  3. Connect to power in the following order: wireless subwoofer sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LED on the wireless subwoofer will light up in green.
  4. Using the product with your TV
    1. Press the Function button repeatedly until the first LED light up in white among the three LEDs.
    2. On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
  5. Connecting the product to your smartphone via Bluetooth
    1. Tap the Settings button  on your smartphone and select Turn on the Bluetooth function. ( Off > On)
    2. Press the Bluetooth pair button. After a moment, the second LED blink in blue among the three LEDs.
    3. Find and tap the product on your smartphone. The product appears as “LG DQP5W / DQP5 (XX)”.
  6. Connecting to the LG Sound Bar app
    1. Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
    2. You can get more information regarding its use by selecting [Help] in [Setting].

If you see a red LED on the bottom of the wireless subwoofer, it means that the sound bar is not connected to the speaker. If this is the case, connect them in the following order.

  1. Press the Power button on the sound bar to turn it off.
  2. Press the PAIRING button on the bottom of the wireless subwoofer. Check if each LED blinks green.
    • If you still see a red LED on the bottom of the wireless subwoofer, press and hold the button on the bottom of the subwoofer again.
  3. Press the Power button on the sound bar to turn it on.
  4. When the connection is established, you will see a green LED light on the bottom of the wireless subwoofer light up in green.
    * Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
  • Design and specifications are subject to change without notice.
  • Google Play is a trademark of Google LLC.

Specification

Power consumption

  • Refer to the main label.
  • Networked standby : 1.5 W (If all network ports are activated.)

AC adapter

  • Model: DA-65F19
  • Manufacturer: Asian Power Devices Inc.
  • Input: 100 – 240 V ~ 50 – 60 Hz
  • Output: 19 V 3.42 A

Dimensions (W x H x D): Approx. 296.0 mm x 59.9 mm x 126.0 mm Bus Power Supply (USB): 5 V 500 mA Amplifier (Total RMS Output power): 320 W RMS

How to disconnect the wireless network connection or the wireless device

Set up the Auto power function to off by the app and turn off the product.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit https://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to .
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

 

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
5730 to 5821 MHz 13 dBm

………………………………………………………………………………………………….
………………………………………………………………………………………………….
……………………………………………………………………………………………………………………………

QP5W.DDEULLK_SIMPLE_MFL71810904.indd 12
2021-05-07 2:20:40