LG 32LT560HBUA Smart LED TV Instruction Manual

32LT560HBUA Smart LED TV

ENGLISH Easy Setup Guide
Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras
consultas. FRANÇAIS Guide de configuration rapide
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir
vous y reporter ultérieurement.

LED TV

32LT560HBUA 40LT560H0UA 43LT560H0UA 49LT560H0UA

32LT570HBUA 40LT570H0UA 43LT570H0UA 49LT570H0UA

X 6

X 8

(M4 x L20)

32/40LT560H* 43/49LT560H*

32/40LT570H* 43/49LT570H*

X 2

www.lg.com

Depending upon model / Según el modelo / Selon le modèle Printed in Korea

ENGLISH ESPAÑOL FRANÇAIS

Read Safety and Reference.
WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. Leer Seguridad y Consultas.
ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. Lisez Sécurité et références. AVERTISSEMENT : Pour éviter les blessures, cet appareil doit être solidement fixé au bureau ou au mur, conformément aux directives du manuel Sécurité et références.

3 c
a b

4-A

32/40LT560H* 32/40LT570H*

4-B

43/49LT560H* 43/49LT570H*

5-A

32/40LT560H* 32/40LT570H*

5-B

43/49LT560H* 43/49LT570H*

*MFL71382508*
(2010-REV02)

32LT560HBUA 739 739 495 495 241 241 441 441 84 32LT570HBUA (29.0) (29,0) (19.4) (19,4) (9.4) (9,4) (17.3) (17,3) (3.3)
40LT560H0UA 911 911 576 576 241 241 528 528 55.3 40LT570H0UA (35.8) (35,8) (22.6) (22,6) (9.4) (9,4) (20.7) (20,7) (2.1) 43LT560H0UA 977 977 630 630 303 303 575 575 80.8 43LT570H0UA (38.4) (38,4) (24.8) (24,8) (11.9) (11,9) (22.6) (22,6) (3.1) 49LT560H0UA 1,110 1 110 705 705 303 303 650 650 81.1 49LT570H0UA (43.7) (43,7) (27.7) (27,7) (11.9) (11,9) (25.5) (25,5) (3.1)

84 6.05 6,05 4.85 4,85 (3,3) (13.3) (13,3) (10.6) (10,6)

45 W

55,3 8.7 8,7 7.5 7,5 (2,1) (19.1) (19,1) (16.5) (16,5)

90 W

80,8 11.2 11,2 8.0 8,0 (3,1) (24.6) (24,6) (17.6) (17,6)

88 W

81,1 14.5 14,5 11.3 11,3 (3,1) (31.9) (31,9) (24.9) (24,9)

100 W

AC 120 V ~ 50 / 60 Hz

OWNER’S MANUAL
Safety and Reference
LED TV*

* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.

32LT340CBUB 43LT340C0UB 49LT340C0UB

32LT340HBUA 40LT340H0UA 43LT340H0UA 49LT340H0UA

32LT560HBUA 40LT560H0UA 43LT560H0UA 49LT560H0UA

32LT570HBUA 40LT570H0UA 43LT570H0UA 49LT570H0UA

*MFL71402004*
(2010-REV05)

www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved. Printed in Korea

ENGLISH

Important Safety Instruction
· Read these instructions. · Keep these instructions. · Heed all warnings. · Follow all instructions. · Do not use this apparatus near water. · Clean only with dry cloth. · Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. · Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. · Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. · Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. · Only use attachments/accessories specified by the manufacturer. · Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
· Unplug this apparatus during lightning storms or when unused for long periods of time. · Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
2

ENGLISH

Warning! Safety instructions
CAUTION RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
· TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
· Do not place the TV and/or remote control in the following environments: – Keep the product away from direct sunlight. – An area with high humidity such as a bathroom – Near any heat source such as stoves and other devices that produce heat. – Near kitchen counters or humidifiers where they can easily be exposed to steam or oil. – An area exposed to rain or wind.

– Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
– Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
– Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation. · Ventilation
– Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
– Do not install the product on a carpet or cushion.
– Do not block or cover the product with cloth or other materials while unit is plugged in.
· Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.
· Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
· Do not move the TV whilst the Power cord is plugged in.
· Do not use a damaged or loosely fitting power cord. · Be sure to grasp the plug when unplugging the
power cord. Do not pull on the power cord to unplug the TV. · Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

ENGLISH

· Disconnecting the Device from the Main Power
– The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
· Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
· Outdoor Antenna Grounding (Can differ by country):
– If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/ NFPA 70
· Grounding (Except for devices which are not grounded.)
– TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock.
· Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
· Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

· Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.
· Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
· If any of the following occur, unplug the product immediately and contact your local customer service.
– The product has been damaged.
– If water or another substance enters the product (like an AC adapter, power cord, or TV).
– If you smell smoke or other odors coming from the TV.
– When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in. · Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction. · Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product. · Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. · Never disassemble the AC adapter or power cord. This may result in fire or electric shock. · Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

ENGLISH

· To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.
· Batteries
– Store the accessories (battery, etc.) in a safe location out of the reach of children.
– Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
– Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
· Moving
– When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.
· Keep the packing anti-moisture material or vinyl packing out of the reach of children.
· Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.
· Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
· Cleaning
– When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Preparing

· When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.
· Image shown may differ from your TV. · Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual. · The available menus and options may differ from
the input source or product model that you are using. · New features may be added to this TV in the future. · The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord. · The items supplied with your product may vary depending upon the model. · Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. · For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. · Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port. · Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI cable types)
– Ultra High Speed HDMI®/TM cable

B A

B * A 10 mm (0.39 inches)

* B 18 mm

(0.7 inches)

· Do not use any unapproved items to ensure the safety and lifespan of the product.
· Any damages or injuries by using unapproved items are not covered by the warranty.

ENGLISH

Optional Extras
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model)
Wall Mounting Bracket
Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
A B

Lifting and Moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. · It is recommended to move the TV in the box or
packing material that the TV originally came in. · Before moving or lifting the TV, disconnect the
power cord and all cables. · When holding the TV, the screen should face away
from you to avoid damage.
· Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

Model
VESA (A x B) Standard screw Number of screws Wall mount bracket(optional)

40LT560H0UA 32LT340CBUB 40LT570H0UA 32LT340HBUA 43LT340C0UB 32LT560HBUA 43LT340H0UA 32LT570HBUA 43LT560H0UA 40LT340H0UA
43LT570H0UA 200 x 200 M6 4 LSW240B
MSW240

Model
VESA (A x B) Standard screw Number of screws Wall mount bracket(optional)

49LT340C0UB 49LT560H0UA
49LT340H0UA 49LT570H0UA 300 x 300 M6 4 OLW480B
MSW240

· Use at least two people to move a large TV. · When transporting the TV by hand, hold the TV as
shown in the following illustration.
· When transporting the TV, do not expose the TV to jolts or excessive vibration.

ENGLISH

· When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
· When handling the TV, be careful not to damage the protruding buttons.
· Avoid touching the screen at all times, as this may result in damage to the screen.
· Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
· Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)
· When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table. – Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

10 cm
(4 inches)
10 cm
10 cm

10 cm

(Depending upon model) 2 Connect the power cord to a wall outlet.

· Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
· If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
· Do not use any unapproved items to ensure the safety and product life span.
· Any damage or injuries caused by using unapproved items are not covered by the warranty.
· Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
· Do not fasten the screws with excessive force otherwise they may be worn out and become loose.
Using the Kensington Security System (optional)
(Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table.
· The Kensington security system is optional. You can obtain additional accessories from your local dealer.

ENGLISH

Attaching the TV to a desk
(Depending upon model) If mounting the TV on a table, make sure it is installed according to the method outlined in `Attaching the TV to a desk’. The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
(TYPE A)

(TYPE B)

4-Screws (Not provided as parts of the product.)
Stand
Desk Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15 mm, Screw: M5 x L25

2-Screws for Stand Fixing, 2-Washers for Stand Fixing,
2-Nuts for Stand Fixing (Provided as parts of the product.)
Stand
Desk
Securing TV to the Wall

(Depending upon model) 8

ENGLISH

1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. – If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.
· Use a platform or cabinet that is strong and large enough to support the TV securely.
· Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.
Mounting on a Wall
An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

10 cm

10 cm (4 inches)
10 cm 10 cm
10 cm

(Depending upon model)
· Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
· For more information of screws and wall mount bracket, refer to the Separate purchase.
· If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
· When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
· Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

ENGLISH

· When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model)
Stand hole

Connections
You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional. · Make sure not to bend the copper wire of the RF
cable.

Copper wire
· Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
· To improve the picture quality in a poor signal area, purchase a signal amplifier.
· Use a signal splitter to use 2 TVs or more. · If the antenna is not installed properly, contact your
dealer for assistance.
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.
HDMI · Supported HDMI Audio format :
(Depending upon model) Dolby Digital (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) · DTV Audio Supported Codec: MPEG, Dolby Digital

ENGLISH

USB · It is recommended that you use an external USB
HDD with a rated voltage of 5 V of less and a rated current of 500 mA or less. External Speakers
EXTERNAL SPEAKER OUT
or SPEAKER OUT
LINE OUT VOLUME CONTROL
Control port for Speaker out
+ UP
– DOWN
GND RIGHT
LEFT GND
: Depending upon model · Use only with the 3 pole 3.5 mm stereo jack. · Do not connect your headphones or earphones to
the port for connecting an external speaker.

Method of volume control port
(Depending upon model) · Cable Spec.
Each Up / Down pin is pulled to 3.3 V with CPU GPIO.

GND / UP / DOWN

CPU detects transition from 3.3 V to GND level for volume control.

External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. · The external device connections shown may differ
slightly from illustrations in a manual. · Connect external devices to the TV regardless about
the order of the TV port. · If you connect a gaming device to the TV, use the
cable supplied with the gaming device. · Refer to the external equipment’s manual for
operating instructions.

ENGLISH

Network setup
(Depending upon model)
Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.

Using the Button
You can simply operate the TV functions, using the button.

Broadband Modem

Broadband Modem Pro:Centric Server

Router

Broadband Modem

Basic Functions (Type A) * For series of LT340C, 32/43/49LT340H
Power On (Press) Power Off 1 (Press and Hold) Menu control (Press 2) Menu selection (Press and Hold 3)
1 All running apps will close. 2 You can access and adjust the menu by pressing
the button when TV is on. 3 You can use the function when you access menu
control.

Pro:Centric Server
1 Connect the port of the Modem or Router to the port on the TV.
2 Connect the port of the PC to the port on the TV. (Depending upon model)
· Do not connect a modular phone cable to the port.
· Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

* For series of 32/43/49LT560H, 32/43/49LT570H Power On (Press) Power Off 1 (Press)
1 All running apps will close.

ENGLISH

(Type B) * For series of 40LT340H, 40LT560H, 40LT570H
Power On (Press) Power Off 1 (Press and Hold)
Volume Control
Channels Control
1 If the menu button is on the screen, pressing and holding the joystick button will let you exit the menu.
Adjusting the Menu (Depending upon model) When the TV is turned on, press the button one time. You can adjust the Menu items using the button.
Turns the power off. Changes the input source. Scrolls through the saved channels.
Adjusts the volume level.

Using Remote Control
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
(TYPE A) (For series of LT340C, LT340H)

Adjusting the Angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

20°

(Depending upon model)
· When adjusting the angle of the product, watch out for your fingers. – Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

(Some buttons and services may not be provided depending upon models or regions.)
13

ENGLISH

* To use the button, press and hold for more than 3 seconds.
(Power) Turns the TV on or off. Returns to the last TV channel.
Activates or deactivates the subtitles. Shows information on the current program.
Resizes an image.
(Input) Changes the input source. Number button Enters numbers.
(Dash) Inserts a dash between numbers such as 2-1 and 2-2.
Accesses the saved channel list. Alternates between the two last channels
selected (pressing repeatedly). Adjusts the volume level.
Accesses your favorite channel list. Not functional.
(Mute) Mutes all sounds. (Mute) * Pressing and holding the button accesses the [Accessibility] menu.
Scrolls through the saved channels. Moves to the previous or next screen.
Changes the picture mode. (Home) Accesses the Home menu.
Changes the sound mode. (Settings) Accesses the setting menu.
Accesses the quick menu. Navigation button (up / down / left / right) Scrolls through menus or options.
Selects menus or options and confirms your input. Returns to the previous screen. Clears all on-screen displays and returns to TV viewing.
Enables SAP (Secondary Audio Program) Feature.
Digital signal: Changes the audio language. Analog signal: Changes the MTS sound. Sets the length of time until the TV to turns off. , , , , Control buttons for media contents , , , These access special functions in some menus.

(TYPE B) (For series of LT560H, LT570H)

(Some buttons and services may not be provided depending upon models or regions.)
14

ENGLISH

(Power) Turns the TV on or off.
Not functional. Selects the remote’s operating mode: TV.
Selects the remote’s operating mode: DVD.
Changes the input source.
Not functional. Number button Enters numbers
(Dash) Inserts a dash between numbers such as 2-1 and 2-2.
(Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level.
Switches between Letter and Number input modes.
Selects a closed caption. Turns the TV off in a set amount of time. Deletes letters and numbers. Mutes all sounds. Scrolls through the saved channels. Moves to the previous or next screen. Displays and removes Pro:Centric
Application. Shows information on the current program
through Pro:Centric Application.
Displays the program event according to time scheduler of Pro:Centric Application. Navigation button (up / down / left / right) Scrolls through menus or options.
Selects menus or options and confirms your input. (Back) Returns to the previous screen.
Accesses the main menu.
Clears all on-screen displays and returns to TV viewing.
, , , These access special functions in some menus.
, , , , Control buttons for media contents Accesses the AV devices connected to the
TV; Opens the SIMPLINK menu.

Not functional.

Analog mode: Selects MTS sound (Mono, Stereo

or SAP) DTV mode: Changes the audio language.

· Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
· Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
· This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
· The product’s internal and external batteries should not be exposed to excessive heat such as direct sunlight, fire, or the like.

Troubleshooting
The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics. · Cannot control the TV with the remote control.
– Check if anything such as tape has been placed over the receiver.
– Check if there is any obstacle between the product and the remote control.
– Replace the batteries with new fresh ones. · No image display and no sound is produced.
– Check if the product is turned on. – Check if the power cord is connected to a wall
outlet. – Check if there is a problem in the wall outlet by
connecting other products.

ENGLISH

· The TV turns off suddenly.
– Check the power control settings. The power supply may be interrupted.
– Check if the auto-off function is activated on the settings related time.
– If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
· When connecting to the PC (HDMI), no signal is detected.
– Turn the TV off/on using the remote control.
– Reconnect the HDMI cable.
– Restart the PC with the TV on. · Abnormal Display
– If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
– This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
– Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

· Generated Sound – Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. – Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.
· When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending upon model)
· Make sure to wring any excess water or cleaner from the cloth.
· Do not spray water or cleaner directly onto the TV screen.
· Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

ENGLISH

Settings
(For series of LT340C, LT340H)
To select Picture Mode
(Settings) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode optimized for the viewing environment or the program. · [Vivid] Heightens contrast, brightness and sharpness to display vivid images. · [Standard] Displays images in standard levels of contrast, brightness and sharpness. · [APS] APS (Auto power saving) mode reduces power consumption by dimming control. · [Cinema] / [Game] Displays the optimum picture for a movie or a game. · [Sports] Optimized picture mode for sports matches. The pitch and kits are presented in vibrant colors, with crystal-clear images even for fast movements. · [Expert] Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu for adjustment is provided for ISF-certified picture tuning professionals. (ISF logo can be used only on ISF-certified TVs.) ISFccc: Imaging Science Foundation Certified Calibration Control · Depending upon input signal, the available range of picture modes may differ. · [Expert] mode is for picture tuning professionals to control and fine-tune using a specific image. For normal images, the effects may not be drastic. · [Picture Mode] change may modify [Energy Saving] and [Motion Eye Care] settings and it can affect energy consumption.

To set additional picture options
(Settings) [Picture] [Picture Mode Settings] [Picture Options] Adjusts detailed setting for images. · [Noise Reduction] Eliminates noise in the picture. · [MPEG Noise Reduction] Eliminates noise generated while creating digital picture signals. · [Black Level] Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen. · [Real Cinema] Optimizes the screen for movie viewing. · [Motion Eye Care] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the screen. · Depending upon input signal or other picture settings, the range of detailed items for adjustment may differ.
To use energy saving feature
(Settings) [Picture] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. · [Auto] The TV sensor detects the ambient lighting
and automatically adjusts the screen brightness. · [Off] Turns off the Energy Saving. · [Minimum] / [Medium] / [Maximum] Applies the
pre-set Energy Saving. · [Screen Off] Screen is turned off and only sound is
played. Press any button on the remote control to turn the screen back on. · Depending upon the Energy Saving ([Auto] / [Maximum]), you may not be able to adjust the [Backlight]. In this case, navigate to (Settings)
[Picture] [Energy Saving] and set to [Off] or [Minimum].

ENGLISH

Settings
(For series of LT560H, LT570H)
To select Picture Mode
[Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode optimized for the viewing environment or the program. · [Vivid] Heightens contrast, brightness and
sharpness to display vivid images. · [Standard] Displays images in standard levels of
contrast, brightness and sharpness. · [APS] APS (Auto power saving) mode reduces power
consumption by dimming control. · [Cinema] / [Game] Displays the optimum picture for
a movie or a game. · [Sports] Optimized picture mode for sports
matches. The pitch and kits are presented in vibrant colors, with crystal-clear images even for fast movements. · Depending upon input signal, the available range of picture modes may differ. · [Picture Mode] change may modify [Motion Eye Care] settings and it can affect energy consumption.

To set additional picture options
[Picture] [Picture Mode Settings] [Picture Options]
Adjusts detailed setting for images. · [Noise Reduction] Eliminates noise in the picture. · [MPEG Noise Reduction] Eliminates noise generated
while creating digital picture signals. · [Black Level] Adjusts the brightness and contrast of
the screen to suit the black level of the input picture by using the blackness (black level) of the screen. · [Real Cinema] Optimizes the screen for movie viewing. · [Motion Eye Care] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the screen. · Depending upon input signal or other picture settings, the range of detailed items for adjustment may differ.

ENGLISH

Specifications
Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).

Television system Program coverage (Band) External antenna impedance
Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Broadcasting Specifications ATSC, NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 75
Environment condition 0 °C to 40 °C (32 °F to 104 °F) Less than 80 % -20 °C to 60 °C (-4 °F to 140 °F) Less than 85 %

HDMI (PC) supported mode

Resolution
640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 1280 x 10241 1920 x 10801

Horizontal

Vertical

Frequency (kHz) Frequency (Hz)

31.46

70.09

31.46

70.08

31.46

59.94

37.87

60.31

48.36

60.00

54.34

60.05

47.71

60.01

63.98

60.02

67.50

60.00

1 FHD : 43/49LT340C0UB, 40/43/49LT340H0UA, 40/43/49LT560H0UA, 40/43/49LT570H0UA

HDMI (DTV) supported mode

Resolution 640 x 480p 720 x 480p 1280 x 720p 1920 x 1080i
1920 x 1080p

Horizontal

Vertical

Frequency (kHz) Frequency (Hz)

31.46

59.94

31.50

60.00

31.47

59.94

31.50

60.00

44.96

59.94

45.00

60.00

33.72

59.94

33.75

60.00

26.97

23.97

27.00

24.00

33.71

29.97

33.75

30.00

67.43

59.94

67.50

60.00

ENGLISH

RGB (PC) supported mode

(For series of LT340C, LT340H)

Resolution
640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 1280 x 10241 1920 x 10801

Horizontal

Vertical

Frequency (kHz) Frequency (Hz)

31.46

70.09

31.46

70.08

31.46

59.94

37.87

60.31

48.36

60.00

54.34

60.05

47.71

60.01

63.98

60.02

67.50

60.00

1 FHD : 43/49LT340C0UB, 40/43/49LT340H0UA

Component supported mode

(For series of LT340C, LT340H)

Resolution 720 x 480i 720 x 480p 1280 x 720p 1920 x 1080i
1920 x 1080p

Horizontal

Vertical

Frequency (kHz) Frequency (Hz)

15.73

59.94

15.75

60.00

31.47

59.94

31.50

60.00

44.96

59.94

45.00

60.00

33.72

59.94

33.75

60.00

26.97

23.97

27.00

24.00

33.71

29.97

33.75

30.00

67.43

59.94

67.50

60.00

Composite, AV supported mode

(For series of LT560H, LT570H)

Resolution 720 x 480i 720 x 480p

Horizontal

Vertical

Frequency (kHz) Frequency (Hz)

15.73

59.94

15.75

60.00

31.47

59.94

31.50

60.00

My Media Supported Files
* Maximum data transfer rate: 20 Mbps (Mega bit per second)
· External supported subtitle formats: *.srt, *.smi, *.sub (Only for SubViewer 1.0/2.0), *.ass, *.ssa, *.txt

Supported Photo Formats

* BMP and PNG format files may be slower to display than JPEG.
* Non-standard photo/ image file may not be displayed.

File Format
.jpeg .jpg .jpe
.bmp
.png

Format

Resolution

(Available file type)

SOF0: Baseline,

SOF1: Extend Sequential,

SOF2: Progressive

JPEG

(Photo size) Minimum: 64 (W) x 64 (H),

Maximum: Normal Type:

15360 (W) x 8640 (H),

Progressive Type:

1920 (W) x 1440 (H)

(Photo size)

BMP Minimum: 64 (W) x 64 (H),

Maximum: 9600 (W) x 6400 (H)

(Available file type)

Interlace, Non-Interlace

(Photo size)

PNG Minimum: 64 (W) x 64 (H), Maximum:

Interlace: 1200 (W) x 800 (H),

Non-Interlace: 9600 (W) x 6400 (H)

ENGLISH

Supported Audio Formats

File Format
MP3 AAC M4A WMA
WMA 10 Pro
OGG

Info
(Bit rate) 32 Kbps ~ 320 Kbps (Sample freq.) 16 kHz ~ 48 kHz (Support) MPEG-1, MPEG-2, Layer 2, Layer 3 (Bit rate) Free Format (Sample freq.) 8 kHz ~ 48 kHz (Support) ADIF, ADTS (Bit rate) Free Format (Sample freq.) 8 kHz ~ 48 kHz (Support) MPEG-4 (Bit rate) 128 Kbps ~ 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) WMA7, WMA8, WMA9 Standard (Bit rate) ~ 768 Kbps (Channel / Sample freq.) M0: Up to 2 Channel @ 48 kHz (Except LBR mode), M1: Up to 5.1 Channel @ 48 kHz, M2: Up to 5.1 Channel @ 96 kHz (Support) WMA 10 Pro (Bit rate) Free Format (Sample freq.) 8 kHz ~ 48 kHz (Support) OGG Vorbis

Supported Video Formats

* Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
* H.264/AVC is supported profile level 4.1 or below.

Extension .asf .wmv
.avi
.ts .trp .tp .mts .m2ts .vob .mp4 .m4v .mov
.mkv
.mpg .mpeg .mpe
.dat .flv .3gp

Codec

Video

MPEG-4 Part2, XViD, H.264/ AVC, VC1(WMV3, WVC1)

Audio

WMA Standard, WMA9(Pro), MP3, AAC, AC3

Video

MPEG-2, MPEG-4 Part2, XViD, H.264/AVC

HE-AAC, LPCM, ADPCM, MPEG-

Audio

1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III (MP3), Dolby

Digital

Video H.264/AVC, MPEG-2

MPEG-1 Layer I, MPEG-1 Layer

Audio

II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC,

HE-AAC

Video MPEG-1, MPEG-2

Audio

Dolby Digital, MPEG-1 Layer I, MPEG-1 Layer II, DVD-LPCM

Video

MPEG-2, MPEG-4 Part2, XVID, H.264/AVC

Audio AAC, MPEG-1 Layer III (MP3)

Video

MPEG-2, MPEG-4 Part2, XViD, H.264/AVC

Audio

HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), LPCM

Video MPEG-1, MPEG-2

Audio

MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM

Video MPEG-1, MPEG-2 Audio MP2 Video Sorenson H.263, H.264/AVC Audio MP3, AAC, HE-AAC Video H.264/AVC, MPEG-4 Part2 Audio AAC, AMR(NB/WB)

ENGLISH

KEY CODES (TYPE A)

* This feature is not available for all models.

Code (Hexa)

Function

(Power)

(Mute)

(Input)

Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button

Code (Hexa)
45 4C 4D 52 5B 61 63 71 72

R/C Button 79

10 – 19 Number Key 0 – 9

(Settings)

R/C Button 7C R/C Button 8E R/C Button 8F R/C Button 91 R/C Button AA R/C Button B0 R/C Button B1 R/C Button BA R/C Button —

R/C Button

Function (Dash) /
(Blue) (Yellow) (Green) (Red)
(Home)
/

Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button

· Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

ENGLISH

KEY CODES (TYPE B)

* This feature is not available for all models.

Code (Hexa)

Function

Note

R/C Button

Code (Hexa)
4C

R/C Button 45

R/C Button 5B

R/C Button 60

R/C Button 61

R/C Button 63

(Power)

R/C Button 71 R/C Button 72

R/C Button 7E

0C 0E
10 – 19
1A 1E 28 39 40 41

Number Key 0 – 9, (Space)
(Back) /

R/C Button 8E R/C Button 8F R/C Button AA
R/C Button AB
R/C Button B0 R/C Button B1 R/C Button BA R/C Button C0 R/C Button C1 R/C Button C2

R/C Button C3

R/C Button

—

Function (Dash)
(Green) (Red) (Yellow) (Blue) /

Note R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button

· Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)
23

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

* Image shown may differ from your TV. * Cable is not provided. * The connection interface may differ from your TV.

RS-232C Setup

· Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
· Connect the serial port of the control device to the RS232C jack on the product back panel.

NOTE · The type of control port on the TV can be different
between model series.
USB to Serial converter with USB Cable
USB Type

USB IN

(PC)

(TV)

· LG TV supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial converter which is not made nor provided by LG.
· It can be purchased from computer stores that carry accessories for IT support professionals.
RS-232C with RS-232C Cable
DE9 (D-Sub 9pin) Type

(PC)

RS-232C IN
(CONTROL & SERVICE)

(TV)

· You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual.
· The connection interface may differ from your TV.

ENGLISH

Connector type : D-Sub 9-pin male

RS-232C (Serial port)

RS-232C configurations 7-Wire Configurations (Standard RS-232C cable)

RXD

TXD

GND 5

DTR

DSR

RTS

CTS

D-Sub 9

TV 3 2 5 6 4 8 7
D-Sub 9

3-Wire Configurations (Not standard)

TXD

RXD

TXD

GND

GND 5

DTR

DSR

RTS

CTS

D-Sub 9

TXD

RXD

GND

DTR

DSR

RTS

CTS

D-Sub 9

Set ID
For Set ID number, see “Real data mapping (Hexadecimal : Decimal)”.

1 Press (Settings) /

to access the main menus.

2 Press the navigation buttons to scroll to ([General] [Set ID]) and press /

button.

3 Scroll left or right to select a set ID number and select

/ (Back). The adjustment range is 1-99.

4 When you are finished, press /

ENGLISH

Communication Parameters
· Baud rate : 9600 bps (UART) · Data length : 8 bits · Parity : None

· Stop bit : 1 bit · Communication code : ASCII code · Use a crossed (reverse) cable.

Command reference list
* (Depending upon model)

1 Power

2 [Aspect Ratio]

3 Screen Mute

4 Volume Mute

5 Volume Control

6 [Contrast]

7 [Brightness]

8 [Color]

9 [Tint]

10 [Sharpness]

Select

12 Remote Control Lock Mode

13 [Treble]

14 [Bass]

15 [Balance]

16 [Color Temperature]

17 [Equalizer]

18 [Energy Saving]

19 Tune Command

20 [Channel] Control

21 Key

22 Control [Backlight]

23 Input select

24 Auto Configure

COMMAND1 k k k k k k k k k k k k k k k x j j m m m m x j

COMMAND2 a c d e f g h i j k l m r s t u v q a b c g b u

DATA (Hexadecimal) 00 to 01 (page 28) (page 28) 00 to 01 00 to 64 00 to 64 00 to 64 00 to 64 00 to 64 00 to 32 00 to 01 00 to 01 00 to 64 00 to 64 00 to 64 00 to 64 (page 30) 00 to 05 (page 31) 00 to 01 Key Codes 00 to 64 (page 34) (page 34)

· During playing media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS-232C cable, TV can communicate “ka command” in power-on or power-off status. But with USB-to-Serial converter cable, the command works only if TV is on.

ENGLISH

TRANSMISSION / RECEIVING PROTOCOL
* (Depending upon model)

Transmission
(Command1)(Command2)( )([Set ID])( )(Data)(Cr)
(Command 1) : First command to control the TV. (j, k, m or x) (Command 2) : Second command to control the TV. ([Set ID]) : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID `0′, every connected set is controlled. Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/receiving protocol. (Data) : To transmit command data (hexadecimal). Transmit `FF’ data to read status of command. (Cr) : Carriage Return – ASCII code `0 x 0D’ ( ) : Space ASCII code `0 x 20′

OK Acknowledgement
(Command2)( )([Set ID])( )(OK)(Data)(x) * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement (Command2)( )([Set ID])( )(NG)(Data)(x) * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable
functions or communication errors.
Data 00: Illegal Code

Real data mapping (Hexadecimal : Decimal)

* When you enter the (Data) in hexadecimal, refer to following conversion table. * Channel Tune (ma) Command uses two-byte hexadecimal value (Data) to select channel number.

00 : Step 0 01 : Step 1 ([Set ID] 1) … 0A : Step 10 ([Set ID] 10) … 0F : Step 15 ([Set ID] 15) 10 : Step 16 ([Set ID] 16) …

32 : Step 50 ([Set ID] 50) 33 : Step 51 ([Set ID] 51) … 63 : Step 99 ([Set ID] 99) … C7 : Step 199 C8 : Step 200 …

FE : Step 254 FF : Step 255 … 01 00 : Step 256 … 27 0E : Step 9998 27 0F : Step 9999 …

ENGLISH

1 Power (Command: k a)
To control power on or off of the set. Transmission
(k)(a)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off] Data 01 : [On] Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
To show TV is power on or off. Transmission
(k)(a)( )([Set ID])( )(FF)(Cr)
Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
* Similarly, if other functions transmit `FF’ data based on this format, Acknowledgement feedback presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when TV is power on.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
To adjust the screen format. (Main picture format) You can also adjust the screen format using the picture settings.
Transmission
(k)(c)( )([Set ID])( )(Data)(Cr)
Data 01 : [4:3] (Normal screen – Just Scan Off) Data 02 : [16:9] (Wide screen – Just Scan Off) Data 06 : [Original] (Just Scan Off) Data 09 : [Just Scan] Ack
(c)( )([Set ID])( )(OK/NG)(Data)(x)
* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition), Just Scan is available.

* Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.
3 Screen Mute (Command: k d) To select screen mute on/off. Transmission (k)(d)( )([Set ID])( )(Data)(Cr) Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data 10 : Video mute on Ack (d)( )([Set ID])( )(OK/NG)(Data)(x) * In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
4 Volume Mute (Command: k e) To control volume mute on/off. You can also adjust
mute using the mute button on remote control. Transmission (k)(e)( )([Set ID])( )(Data)(Cr) Data 00 : Volume mute on (Volume off) Data 01 : Volume mute off (Volume on) Ack (e)( )([Set ID])( )(OK/NG)(Data)(x)
5 Volume Control (Command: k f) To adjust volume. You can also adjust volume with
the volume buttons on remote control. Transmission (k)(f)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (f)( )([Set ID])( )(OK/NG)(Data)(x)

ENGLISH

6 [Contrast] (Command: k g) To adjust screen contrast. You can also adjust
contrast in the picture settings. Transmission (k)(g)( )([Set ID])( )(Data)(Cr)
Ack (g)( )([Set ID])( )(OK/NG)(Data)(x)
7 [Brightness] (Command: k h) To adjust screen brightness. You can also adjust
brightness in the picture settings. Transmission (k)(h)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (h)( )([Set ID])( )(OK/NG)(Data)(x)
8 [Color] (Command: k i) To adjust the screen color. You can also adjust color
in the picture settings. Transmission (k)(i)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (i)( )([Set ID])( )(OK/NG)(Data)(x)
9 [Tint] (Command: k j) To adjust the screen tint. You can also adjust color
in the picture settings. Transmission (k)(j)( )([Set ID])( )(Data)(Cr) Data Red : 00 to Green : 64 Ack (j)( )([Set ID])( )(OK/NG)(Data)(x)

10 [Sharpness] (Command: k k)
To adjust the screen sharpness. You can also adjust sharpness in the picture settings.
Transmission (k)(k)( )([Set ID])( )(Data)(Cr)
Data Min : 00 to Max : 32 Ack (k)( )([Set ID])( )(OK/NG)(Data)(x)
11 [OSD] Select (Command: k l)
To select OSD (On Screen Display) on/off when controlling remotely.
Transmission (k)(l)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off] Data 01 : [On] Ack (l)( )([Set ID])( )(OK/NG)(Data)(x)
12 Remote Control Lock Mode (Command: k m)
To lock the front panel controls on the monitor and remote control.
Transmission (k)(m)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off] Data 01 : [On] Ack (m)( )([Set ID])( )(OK/NG)(Data)(x)
* If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.
* In the standby mode (DC off by off timer or `ka’, `mc’ command), and if key operation is on, TV will not turn on by power on key of IR & Local Key.

ENGLISH

13 [Treble] (Command: k r) (Depending upon model) To adjust treble. You can also adjust Treble in the
audio settings. Transmission (k)(r)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (r)( )([Set ID])( )(OK/NG)(Data)(x)
14 [Bass] (Command: k s) (Depending upon model) To adjust bass. You can also adjust Bass in the
audio settings. Transmission (k)(s)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (s)( )([Set ID])( )(OK/NG)(Data)(x)
15 [Balance] (Command: k t) To adjust balance. You can also adjust balance in
the audio settings. Transmission (k)(t)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (t)( )([Set ID])( )(OK/NG)(Data)(x)
16 [Color Temperature] (Command: x u) To adjust color temperature. You can also adjust
color temperature in the picture settings. Transmission (x)(u)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Ack (u)( )([Set ID])( )(OK/NG)(Data)(x)

17 [Equalizer] (Command : j v) Adjust EQ of the set. Transmission (j)(v)( )([Set ID])( )(Data)(Cr)

MSB

LSB

00000000

Frequency

Data

765 000 001

Frequency 1st Band 2nd Band

43210 00000 00001

Step 0(decimal) 1(decimal)

0 1 0 3rd Band … … … … …

…

0 1 1 4th Band 1 0 0 1 1 19(decimal) 1 0 0 5th Band 1 0 1 0 0 20(decimal)

Ack
(v)( )([Set ID])( )(OK/NG)(Data)(x)
* It depends on model, and can adjust when sound mode is EQ adjustable value.

18 [Energy Saving] (Command: j q) (Depending upon model) To reduce the power consumption of the TV. You
can also adjust energy saving in picture settings. Transmission
(j)(q)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off] Data 01 : [Minimum] Data 02 : [Medium] Data 03 : [Maximum] Data 04 : [Auto] Data 05 : [Screen off] Ack
(q)( )([Set ID])( )(OK/NG)(Data)(x)

ENGLISH

19 Tune Command (Command: m a) * This command may work differently Depending
upon model and signal. * For Europe, Mid-East, Colombia, Asia except South
Korea and Japan Model
Select channel to following physical number. Transmission (m)(a)( )([Set ID])( )(Data 00)( )(Data 01)
( )(Data 02)(Cr)
· Analog Antenna/Cable
(Data 00)(Data 01) Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data
– 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog)
– 00 : Antenna TV (ATV) – 80 : Cable TV (CATV)
· Digital Antenna/Cable/Satellite (Data 00)(Data 01): Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data
– 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital)
– 10 : Antenna TV (DTV) – 20 : Antenna Radio (Radio) – 40 : Satellite TV (SDTV) – 50 : Satellite Radio (S-Radio) – 90 : Cable TV (CADTV) – a0 : Cable Radio (CA-Radio)

· Tune Command Examples:
1 Tune to the Analog antenna (PAL) Channel 10. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00
2 Tune to the digital antenna (DVB-T) Channel 01. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10
3 Tune to the satellite (DVB-S) Channel 1000. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40
Ack
(a)( )([Set ID])( )(OK)(Data 00)(Data 01)
(Data 02)(x)(a)( )([Set ID])( )(NG)(Data 00)(x)
* For South Korea, North/Latin America except Colombia Model
To tune channel to following physical/major/minor number.
Transmission
(m)(a)( )(0)( )(Data 00)( )(Data 01)( )
(Data 02)( )(Data 03)( )(Data 04)( )(Data 05)(Cr)
– Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.

ENGLISH

· Analog Antenna/Cable Data 00 : Physical Channel Number
– Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) – Cable (CATV): 01~87 (Decimal: 1~135) (Data 01 ~ 04): Major/Minor Channel Number Data 01 & 02: xx (Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog) – 00 : Antenna TV (ATV) – 01 : Cable TV (CATV)
· Digital Antenna/Cable Data 00 : xx (Don’t care) (Data 01)(Data 02): Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999) (Data 03)(Data 04): Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital)
– 02 : Antenna TV (DTV) Use Physical Channel Number – 06 : Cable TV (CADTV) Use Physical Channel Number – 22 : Antenna TV (DTV) Don’t Use Physical Channel Number – 26 : Cable TV (CADTV) – Don’t Use Physical Channel Number – 46 : Cable TV (CADTV) Use Major Channel Number Only (One Part Channel)
* Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).

· Tune Command Examples: 1 Tune to the Analog cable (NTSC) channel 35.
[Set ID] = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01 2 Tune to the digital antenna (ATSC) channel 30-3. [Set ID] = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22 Total = ma 00 00 00 1E 00 03 22
Ack (a)( )([Set ID])( )(OK)(Data 00)(Data 01)(Data 02)
(Data 03)(Data 04)(Data 05)(x)(a)( )([Set ID])( )
(NG)(D

Download

LG 32LT560HBUA Smart LED TV Instruction Manual

Was this manual helpful?