LG TONE-UFP5W Stereo Headset Owner’s Manual

LG TONE-UFP5W Stereo Headset

WHATS IN THE BOX

NOTE: Actual product design may differ from images shown in manual. *A mid-sized ear gel is attached to the earbud by default.

CAUTION

Make sure authentic LG Electronics components are used. Using a nonauthentic component may damage the product and thus void the warranty. Use the USB Type C™ cable provided with the product

Overview

Charging Case

Earbuds

  • Make sure that the charging terminal is not soiled with foreign substance.
  • The appearance and specifications of the actual product may differ depending on the model

How to pair

  1. Turn on the Bluetooth function on the mobile phone or the device to be connected.
  2. Open the cover of the charging case with the earbuds mounted on the case. Press and hold the touchpad of the left or right earbud for 3 to 5 seconds until the battery status indicator blinks in blue.
  3. When the Fast Pair connection pop-up appears on the top area of the mobile phone screen, tap it to connect. (It only supports Android™ 6.0 or higher, and requires configuring Bluetooth and location information = settings of the mobile device.)
  4. If the pop-up does not appear, select [LG-TONE-FP5] from the Bluetooth menu on the mobile phone and connect it (for users of iOS or Android 5.0 or lower versions).

CAUTION: In the list of Bluetooth-connected devices, LG-TONE-FP5_LE is not the correct model name for connection. Check the model name in use and connect with the model name without “LE”. If the earbud model name is abnormally displayed on the Android device, change the model name in the Bluetooth menu of Connected Device Settings

NOTE:
To connect with another device, perform the above procedure again. Bluetooth name of the product is “LG-TONE-FP5

Automatic Reconnection
The earbuds are connected automatically when you open the cover of the charging case. If you close the cover of the charging case with both earbuds mounted in the charging case, the earbuds are disconnected.

Wearing Earbuds

  1. Separate the earbuds from the charging case and adjust them so that they fit comfortably in your ears.
  2. When you wear the earbuds, you will hear a wearing detection alarm.

Playing Music

Function Description
 

 

Play / Pause

  

 

: Touch the left or right earbud once.

 

 

Adjusting the Volume

  

 

 

: Touch the left(Decrease volume) or right(Increase volume) earbud twice.

 

 

Play Next

  

 

: Touch the left or right earbud three times.

NOTE: You can change the operation method of the function in the touchpad settings of the LG TONE Free app.

Mobile Calling Functions

Function Status Description
Answering Calls  

Ringing

  

Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.
 

Making Calls

  

Idle

 If you make a call using a mobile phone, the call is automatically connected to the headset.
 

 

 

Receiving Calls while on the Phone

  

 

 

 

Talking

 If you touch the left or right earbud once, the current call will go on hold, and you will be able to answer an incoming call.

If the previous call is on hold, you can finish

the current call on the mobile phone. (It works differently depending on the mobile phone settings.)

Rejecting Calls  

Ringing

  

Touch and hold the left or right earbud.

Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)

[Listen to the Ambient Sound (LAS)]

The Listen to the Ambient Sound (LAS) function allows you to listen to the ambient sound so that you can recognize the surrounding situation and any potential risks

[Active Noise Cancellation (ANC)]

The Active Noise Cancellation (ANC) function blocks any ambient sound. So, you can use the function to listen to the music or watch a video without interference.

Touch and hold the left or right earbud

  • to switch between the ANC mode and the LAS mode.
  • You can set the LAS and ANC functions in the LG TONE Free app.
  • You can configure the Listen to the Ambient Sound mode and Conversation mode using the LG TONE Free app.
  • If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
  • You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.

CAUTION:
When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the surrounding environment for safety.

Charging

[Wired Charging]

When the charging cable is connected, the charging status is displayed in the charging case.

NOTE: The earbuds and the charging case are charged at the same time. The charging port on the charging case cannot be used to supply power to mobile phones, etc.

Checking the Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is displayed. Otherwise, the charging case’s battery status is displayed.

NOTE: When the charging case lid is closed, charging case battery status is displayed. If the charging case has no remaining charge, there will be no display and it cannot function. We recommend you keep the charging case charged at all times as the earbuds are not able to be turned on and turned off independently.