LG SN9Y 5.1.2ch 520W Dolby Atmos Sound Bar Owner’s Manual

LG SN9Y 5.1.2ch 520W Dolby Atmos Sound Bar

What’s in the box

Front Panel

  • (Standby) · · · · · · · · · · · ·Switches the unit ON or OFF.
  • F (Function) · · · · · · · · · · · · · · · · · · · · · · · · · ·Selects function.
  • -/+ (Volume) · · · · · · · · · · · · · · · · · · · · · · Adjusts volume.
  • (Wi-Fi) · · · · · · · · · · · · · · · · · · · ·Selects Wi-Fi function.

NOTE: Reset the Unit: Press and hold the / on the unit until you hear the beep sound once.

Rear Panel

  • HDMI OUT (TV eARC/ARC) · · · · · · · Connect to a TV.
  • HDMI IN · · · · · · · · Connect to device with HDMI OUT.
  • OPTICAL IN · · · · · · · · · · · · ·Connect to an optical device.
  • USB port · · · · · · · · · · · · · · · · · · · ·Connect to a USB device.

NOTE:Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

  • Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
  • Turn on the sound bar.
    •  The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

  • Press Pairing on the rear of the wireless subwoofer.
    • The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and
      hold the Pairing.)
  • Turn on the sound bar.
    • Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.

NOTE:Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

TV Connection

Connect the sound bar and TV using Optical (A) or HDMI ARC (B).

Optical Connection

  • Connect the sound bar to the TV using Optical cable.
  • Set up [External Speaker (Optical)] on your TV setting menu.

HDMI (TV eARC/ARC) Connection

  • Connect the sound bar to the TV using HDMI cable.
  • Set up [External Speaker (HDMI ARC)] on your TV setting menu.

NOTE:

  • HDMI connection is unavailable if your TV does not support HDMI ARC.
  • If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.

Additional Device Connection

  • Connect to the external device like as follow.
  • Set the input source by pressing F repeatedly.

Network Connection

  1. Check network condition. A router connected to network should be installed.
  2. Connect your smart device to your home network.
  3. Connect the sound bar to the power supply.

NOTE: All devices should be connected to same router.

Step.1: Install “Google Home” App Download the Google Home App from the Google Play or App Store.
Step.2: Set up the Wi-Fi connection with app

  • Connect your smart device to the Wi-Fi network that you’ll use for your unit.
    In case of iOS devices, it should be turned on Bluetooth setting on your smart device.
  • Launch the “Google Home” app.
  • Follow the steps for Wi-Fi connection on the app.
    • When the unit is properly connected to Wi-Fi, “CONNECTED” will appear on the display window with sound.

NOTE:

  • When connect to Wi-Fi, this app may request to create a Google Account. You will need a Google account to use this app.
  • “Google Home” app is provided by Google. It might be revised by a change of Google Policy.

Remote control

Replacement of Battery

  • SOUND EFFECT: Selects a sound effect mode.
    • TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
  • FOLDER W/S: Searches a folder.Displays the information of a file, an input source, a connected Bluetooth device name or an application name.
    • Auto Power ON/OFF: Long press and press it again.:Adjusts sound level of each speaker.
    • Surround sound: Long pressand press it again.

REPEAT: Listens to your files repeatedly or randomly.

Additional

Download LG Sound Bar Application
You can manage the speaker settings and control the speaker by using “LG Sound Bar”. Download “LG Sound Bar” on the App Store or Google Play Store.

AI Room calibration
AI Room Calibration is a sound tuning tool, which adjusts the audio settings of the Sound Bar based on the room acoustics and environment. To access the AI Room Calibration it is necessary to install the “LG Sound Bar” app. On [Sound Setting]
menu, choose [AI Room Calibration].

Additional Information

Specification

P ower requirements R efer to the main label.
P ower consumption R efer to the main label.
Networked standby :  6.5 W (If all network ports are activated.)
Dimensions  (W x H x D) Approx.

1220.0 mm x 57.0 mm x

145.0 mm (with foot)

Bus Power Supply (USB) 5 V 0 500 mA
Amplifier (Total RMS Output power) 520 W RMS

Design and specifications are subject to change without notice.

NOTE:

Rear Speakers Ready

  • Ready for surround sound with Rear
  • Speakers Kit sold separately. (SPK8-S)

To enjoy content containing Dolby Atmos® and DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.

How to disconnect the wireless network connection or the wireless device Turn off the unit by pressing the power button for more than 3 seconds.