AEG IKB64301XB 60cm Induction Hob User Manual

AEG IKB64301XB 60cm Induction Hob

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.Visit our website for:

  • Get usage advice, brochures, trouble shooter, service information: www.aeg.com
  • Register your product for better service: www.registeraeg.com
  • Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Children and vulnerable people’s safety

  •  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  •  Do not let children play with the appliance.
  •  Keep all packaging away from children and dispose of it appropriately.
  •  Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
  •  If the appliance has a child safety device, this should be activated.
  •  Children shall not carry out cleaning and user maintenance of the appliance without supervision.
  • Children aged 3 years and under must be kept away from this appliance when it is in operation at all times.

General Safety

  •  WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
  •  Do not operate the appliance by means of an external timer or separate remote-control system.
  •  WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
  •  NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
  •  WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
  •  Do not operate the appliance by means of an external timer or separate remote-control system.
  • WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
  •  NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified person must install this appliance.

WARNING! Risk of injury or damage to the appliance.

  •  Remove all the packaging.
  •  Do not install or use a damaged appliance.
  •  Follow the installation instruction supplied with the appliance.
  •  Keep the minimum distance from the other appliances and units.
  •  Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
  •  Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
  •  Protect the bottom of the appliance from steam and moisture.
  •  Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.
  •  Each appliance has cooling fans on the bottom.
  •  If the appliance is installed above a drawer:
  •  Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system.
  • Keep a distance of a minimum 2 cm between the bottom of the appliance and parts stored in the drawer.

Electrical Connection

WARNING! Risk of fire and electrical shock.

  •  All electrical connections should be made by a qualified electrician.
  •  The appliance must be earthed.
  •  Before carrying out any operation make sure that the appliance is disconnected from the power supply.
  •  Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
  •  Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
  •  Use the correct electricity mains cable.
  •  Do not let the electricity mains cable tangle.
  •  Make sure that a shock protection is in stalled.
  •  Use the strain relief clamp on the cable.
  •  Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets.
  •  Do not use multi-plug adapters and extension cables.
  •  Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
  •  The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
  •  Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
  •  If the mains socket is loose, do not connect the mains plug.
  •  Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
  •  Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
  •  The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

Use

Warning Risk of injury, burns and electrical shock

  •  Remove all the packaging, labelling and protective film (if applicable) before first use.
  •  Use this appliance in a household environment.
  •  Do not change the specification of this appliance.
  •  Make sure that the ventilation openings are not blocked.
  •  Do not let the appliance stay unattended during operation.
  •  Set the cooking zone to “off” after each use.
  •  Do not rely on the pan detector.
  •  Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
  •  Do not operate the appliance with wet hands or when it has contact with water.
  •  Do not use the appliance as a work surface or as a storage surface.
  •  If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
  •  Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
  •  When you place food into hot oil, it may splash.

WARNING Risk of fire and explosion

  • Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
  •  The vapours that very hot oil releases can cause spontaneous combustion.
  •  Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
  •  Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
  •  Do not keep hot cookware on the control panel.
  •  Do not put a hot pan cover on the glass surface of the hob.
  •  Do not let cookware to boil dry.
  •  Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
  •  Do not activate thae cooking zones with empty cookware or without cookware.
  • Do not put aluminium foil on the appliance. Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass /glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
  • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

Care and cleaning

  •  Clean regularly the appliance to prevent the deterioration of the surface material.
  •  Deactivate the appliance and let it cool down before you clean it.
  •  Disconnect the appliance from the electrical supply before maintenance.
  •  Do not use water spray and steam to clean the appliance.
  •  Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects.

Disposal

WARNING! Risk of injury or suffocation.

  •  Contact your municipal authority for information on how to discard the appliance correctly.
  •  Disconnect the appliance from the mains supply.
  •  Cut off the mains electrical cable close to the appliance and dispose of it.

Service

  •  To repair the appliance contact an Authorised Service Centre.
  •  Use original spare parts only.

PRODUCT DESCRIPTION

Cooking surface layout

  1.  Induction cooking zone
  2.  Control panel

Control panel layout

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

  Sensor field Function Comment
 1   ON / OFF To activate and deactivate the hob.
 2   Lock / Child Safety Device To lock / unlock the control panel.
 3   Pause To activate and deactivate the function.
 4 Heat setting display To show the heat setting.
 5 Timer indicators of cooking zones To show for which zone you set the time.
 6 Timer display To show the time in minutes.
 7   To select the cooking zone.
  Sensor Function field Comment
 

8

/       – To increase or decrease the time.
 

9

 /      – To set a heat setting.
10   PowerBoost To activate and deactivate the function.

Heat setting displays

Display                    Description
        The cooking zone is deactivated.
 –  /      –           The cooking zone operates.

The dot means a change by half of a heating level.

        Pause operates.
        Automatic Heat Up operates.
        PowerBoost operates.
 + digit                There is a malfunction.
        A cooking zone is still hot (residual heat).
        Lock / Child Safety Device operates.
        Incorrect or too small cookware or no cookware on the cooking zone.
        Automatic Switch Off operates.

Residual heat indicator

WARNING! There is a risk of burns from residual heat.

DAILY USE

WARNING! Refer to Safety chapters. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass-ceramic is heated by the heat of the cookware.

Activating and deactivating
Touch for 1 second to activate or deactivate the hob.

Automatic Switch Off
The function deactivates the hob automatically if:

  •  all cooking zones are deactivated,
  •  you do not set the heat setting after  you activate the hob,
  •  you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.
  •  the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
  •  you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes.
  •  you do not deactivate a cooking zone or change the heat setting. After The relation between the heat setting and the time after which the hob deactivates:
Heat setting The hob deacti- vates after
, 1 – 2 6 hours
3 – 4 5 hours
5 4 hours
6 – 9 1.5 hour

Automatic Heat Up
If you activate this function you can get the necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting.

PowerBoost
This function makes more power available to the induction cooking zones. The function can be activated for the
induction cooking zone only for a limited period of time. After this tim

Timer
Count Down Timer
You can use this function to set how long the cooking zone should operate for a single cooking session. First set the heat setting for the cooking zone then set the function. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. activate the fWhen the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.e cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time.To stop the sound: touch.

Minute Minder
You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. The heat setting display shows The function has no effect on the operation of the cooking zones.

Pause
This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. When the function is active, and symbols can be used. The function does
not stop the timer functions: and to activate the function.

Lock
You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.
Set the heat setting first.When you deactivate the hob, you also deactivate this funWhen the function is set to hear the sounds only when:ction.

  •  you touch
  •  Minute Minder comes down
  •  Count Down Timer comes down
  •  you put something on the control panel.

If there is a problem with electrical supply and the hob deactivates it does not keep previous settings.

Power management

  •  Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration.
  •  Each phase has a maximum electricity loading of 3700 W.
  • The function divides the power between cooking zones connected to the same phase.

HINTS AND TIPS

WARNING! Refer to Safety chapters.

Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with the correct cookware.

  •  correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer).
  •  not correct: aluminium, copper, brass, glass, ceramic, porcelain.
  •  some water boils very quickly on a zone set to the highest heat setting.
  •  a magnet pulls on to the bottom of the cookware.
  • The bottom of the cookware must be as thick and flat as possible.

Cookware dimensions
Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than the minimum receives only a part of the power generated by the cooking zone.Refer to the “Technical information” chapter.

  •  crack noise: cookware is made of different materials (sandwich construction).
  •  whistle sound: you use the cooking zone with high power level and the cookware is made of different materials (sandwich construction).
  •  humming: you use high power level.
  •  clicking: electric switching occurs.
  •  hissing, buzzing: the fan operates. The noises are normal and do not refer to hob malfunction.

Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power The data in the table is for guidance only.

Heat setting Use to: Time (min) Hints
 – 1 Keep cooked food warm. as nec- essary Put a lid on the cookware.
1 – 2. Hollandaise sauce, melt: but- ter, chocolate, gelatine. 5 – 25 Mix from time to time.
1 – 2. Solidify: fluffy omelettes, baked eggs. 10 – 40 Cook with a lid on.
2. – 3. Simmer rice and milkbased dishes, heat up ready-cooked meals. 25 – 50 Add at least twice as much liq- uid as rice, mix milk dishes halfway through the proce- dure.
3. – 4. Steam vegetables, fish, meat. 20 – 45 Add a couple of tablespoons of liquid.
4. – 5. Steam potatoes. 20 – 60 Use max. ¼ l of water for 750 g of potatoes.
4. – 5. Cook larger quantities of food, stews and soups. 60 – 150 Up to 3 l of liquid plus ingredi- ents.
5. – 7 Gentle fry: escalope, veal cor- as nec- Turn halfway through.
  don bleu, cutlets, rissoles, essary  
  sausages, liver, roux, eggs,    
  pancakes, doughnuts.    
7 – 8 Heavy fry, hash browns, loin steaks, steaks. 5 – 15 Turn halfway through.
9                       Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

CARE AND CLEANING

WARNING! Refer to Safety chapters.

General information

  •  Clean the hob after each use.
  •  Always use cookware with clean bottom.
  •  Scratches or dark stains on the surface have no effect on how the hob operates.
  •  Use a special cleaner applicable for the surface of the hob.
  •  Use a special scraper for the glass.
  • If not, the dirt can cause damage to the hob. Take care to avoid burns. Put the special scraper on the glass surface at an acute angle and move the blade on the surface.
  •  Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth.
  •  Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a moist cloth.

TROUBLESHOOTING

Problem                                 Possible cause Remedy
You cannot activate or oper- The hob is not connected to ate the hob.                            an electrical supply or it is

connected incorrectly.

Check if the hob is correctly connected to the electrical supply. Refer to the connec- tion diagram.
The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a quali- fied electrician.
You do not set the heat set- ting for 10 seconds. Activate the hob again and set the heat setting in less than 10 seconds.
You touched 2 or more sen- sor fields at the same time. Touch only one sensor field.
Pause operates. Refer to “Daily use”.
There is water or fat stains on the control panel. Clean the control panel.
Problem Possible cause Remedy
An acoustic signal sounds and the hob deactivates.

An acoustic signal sounds when the hob is deactivated.

You put something on one or more sensor fields. Remove the object from the sensor fields.
The hob deactivates. You put something on the sensor field . Remove the object from the sensor field.
Residual heat indicator does The zone is not hot because If the zone operated suffi-
not come on. it operated only for a short ciently long to be hot, speak
time or the sensor is dam- to an Authorised Service
aged. Centre.
Automatic Heat Up does not operate. The zone is hot. Let the zone become suffi- ciently cool.
The highest heat setting is set. The highest heat setting has the same power as the func- tion.
The heat setting changes between two levels. Power management oper- ates. Refer to “Daily use”.
The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear zones if possible.
There is no sound when you touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to “Daily use”.
 comes on. Child Safety Device or Lock operates. Refer to “Daily use”.
 comes on. There is no cookware on the zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer to “Hints and tips”.
The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to “Tech- nical data”.
 and a number come on. There is an error in the hob. Deactivate the hob and acti- vate it again after 30 sec- onds. If  comes on again,

disconnect the hob from the

electrical supply. After 30 seconds, connect the hob again. If the problem contin- ues, speak to an Authorised Service Centre.

Problem Possible cause Remedy
You can hear a constant The electrical connection is Disconnect the hob from the
beep noise. incorrect. electrical supply. Ask a quali-
    fied electrician to check the
    installation.

 

you cannot find a solution
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet.

INSTALLATION

Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob.

Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.

 Connection cable

  •  The hob is supplied with a connection cable.
  •  To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90°C or higher. Speak to your local Service Centre.

TECHNICAL DATA

  • Model IKB64301XB  :  PNC 949 597 287 00
  • Typ 61 B4A 00 AA  :   220 – 240 V / 400 V 2N 50 – 60 Hz
  • Induction 7.35 kW   :  Made in Germany
  • Ser.Nr. …………….. 7.35 kW

Cooking zones specification

Cooking zone Nominal power (maximum heat setting) [W] PowerBoost [W] PowerBoost maximum dura- tion [min] Cookware diam- eter [mm]
Left front 2300 3700 10 180 – 210
Left rear 1800 2800 10 145 – 180
Cooking zone Nominal power (maximum heat setting) [W] PowerBoost [W] PowerBoost maximum dura- tion [min] Cookware diam- eter [mm]
Right front 1400 2500 4 125 – 145
Right rear 1800 2800 10 145 – 180

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.For optimal cooking results use cookware no larger than the diameter in the table.

ENERGY EFFICIENCY

Model identification   IKB64301XB
Type of hob   Built-In Hob
Number of cooking zones   4
Heating technology   Induction
Diameter of circular cook- Left front 21.0 cm
ing zones (Ø) Left rear 18.0 cm
  Right front 14.5 cm
  Right rear 18.0 cm
Energy consumption per Left front 178.4 Wh / kg
cooking zone (EC electric Left rear 184.9 Wh / kg
cooking) Right front 183.2 Wh / kg
  Right rear 184.9 Wh / kg
Energy consumption of the hob (EC electric hob)   182.9 Wh / kg

Energy saving
You can save energy during everyday cooking if you follow below hints.

  • When you heat up water, use only the amount you need.
  •  If it is possible, always put the lids on the cookware.
  •  Before you activate the cooking zone put the cookware on it.
  •  Put the smaller cookware on the smaller cooking zones.
  •  Put the cookware directly in the centre of the cooking zone.
  •  Use the residual heat to keep the food warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.