Motorola MBP11 Digital Audio Baby Monitor User Guide

Motorola MBP11 Digital Audio Baby Monitor

Setting up your Digital Audio Baby Monitor

Baby unit power supply

  • Insert the small plug of the power adapter into the side of the baby unit, as shown. Connect the other end of the power adapter to the main socket /power outlet.

Parent unit battery installation

  • Turn the belt clip so that it is in the hanging position.
  • Slide off the battery compartment cover.
  • Insert the supplied rechargeable batteries, and fit the battery pack into the compartment, as shown. Reattach the battery compartment cover.
  • Insert the small plug of the power adapter into the side of the parent unit. Connect the other end of the power adapter to the main socket/power outlet.
  • The Charging Indicator comes on.

The belt clip on the parent unit and baby unit

  • The parent and baby units come with belt clip mode. You can convert into support stand mode by lifting up the belt clip and rotating by half turn.

The basic operation of the keys

Parent Unit
  Press to increase the speaker volume.
  Press to decrease the speaker volume.
  Press and hold to power on/off the parent unit.
Baby Unit
Press and hold to power on/off the baby unit.

General Information

If your product is not working properly…

  1. Read this Quick Start Guide or the User’s Guide.

Contact

  1. Customer Service: + 49 (0) 1805 938 802 in Europe
  2. Email: [email protected]