LG FS21GB OLED Gallery Stand Owner’s Manual

FS21GB OLED Gallery Stand
FS21GC
FS22GB
Owner’s Manual

Product Specifications

Model Name FS21GB
FS21GC
FS22GB
Width x Depth x Height (mm) (Max.) 1159 x 761 x 1061
Weight (kg) 6.0

CAUTION

  • This stand (model name: FS21*/FS22*) is designed exclusively for TVs manufactured by LG Electronics Inc. For compatible TV series, please refer to the below table.
  • Using it with other equipment may render it unstable and cause injury.

Precautions before Installation

  • The Gallery Stand does not include a power strip. In order to connect a TV or other devices on the Gallery Stand, purchase and use a power strip of an appropriate length (2.5 meters or more is recommended).
  • The maximum weight mountable on the rear brackets of the Gallery Stand is 1.5 kg.
  • Mounting a wireless router on the rear brackets of Gallery Stand causes frequency interference due to the proximity of the wireless antenna built into the TV and the wireless router, which may  prevent the TV’S artificial intelligence remote control from working properly.
  • If you mount a set-top box on the rear brackets of Gallery Stand, the remote control reception unit on the set-top box may be blocked, causing problems with a reception to the set-top box. (If problems with the remote control reception continue, the issue may be fixed with the enclosed IR repeater (signal extension cable).)

IR Repeater Mounting Guide

  • For the positions of installation, please refer to A-C of Figure 9 in the installation manual.
A Reception unit Lower end of Gallery Stand Attaches with facing forwards.
B Transmission unit Reception unit of the set-top box
C Power connection unit USB terminal of the TV or the set-top box

Models Compatible with the Gallery Stand

Compatible Model Released in 2019

Product Group Inches Series
OLED 55/65 C9
B9
SUHD 55 SM98 SM96 SM95 SM90
55/65 5M89 5M86 SM85 SM83 SM82 SM81 SM80

Compatible Model Released in 2020

Product Group Inches Series
OLED 55/65 GX
CX
BX
NANO 55/65 NAN093 NAN091 NAN090 NAN087 NAN086 NAN085 NAN083 NAN081 NAN080
55 NAN095

Compatible Model Released in 2021

Product Group Inches Series
OLED 55/65 G1 C1
B1 A1
NANO 55/65 NANO75 NANO76 NANO77
NANO79 NANO80 NANO81
NANO83 NANO85 NANO86
NANO88
UHD 55/60/65 UP80 UP81
UP82 UP83
UP77 UP78

Compatible Model Released in 2022

Product Group Inches Series
OLED 55/65 G2 C2
B2 A2
NANO 55/65 NANO75
NANO80
UHD 55/60/65 UQ80
UQ90

How to Prevent TV from Falling

  1. Fix the brackets on the rear part of the product and on the wall as shown in the picture. Secure the product brackets and wall brackets at the same height.
  2. Verify that the product brackets and wall brackets are firmly fastened.
  3. Using a strong cord, tie and connect the product brackets to the wall brackets. When moving a product installed in this way, please untie the cord first.
    • Install the TV in the horizontal position only.
    • It is safe to install the product according to the installation method to prevent damage to the product or personal injury even if the product is pulled forward.
    • Install the TV near a wall to prevent falls when pushed.
    • The brackets, screws, and cords must be purchased separately as they are not provided with the product.

How to Adjust the Height on Both Sides of the TV on Gallery Stand

  • Loosen the screw halfway by using a Phillips screwdriver, adjust the height on both sides of the TV as illustrated, and tighten the screw.