Beko RHP6220 PTC Fan Heater User Manual

beko RHP6220 PTC Fan Heater

This product is only suitable for well-insulated spaces or occasional use.

Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it asa reference for future use. lf you hand over the product to someone else, give the user manual as wel. Follow all warnings and information in the user manual.

Meanings of the symbols
The following symbols are used in the various section of this manual:

• Important information or useful hints about usage.
• Warning for hazardous situations with regard to life and property.
• Warning to actions that must never perform.
• Warning for electric shock.
• Warning for the danger of fire
• Warning for hot surfaces.
• Do not cover it.

Important safeguards

When using any electrical appliance, basic safety precautions should always be followed, including the following:

• To ensure familiarity with the controls, safety features, and operation ot your heater read all instructions betore using.
• Do not insert foreign objects through the intake or discharge grilles
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Disconnect the cord from the outlet before cleaning. A heater should never be ed under conditions where it may be imme or come in contact with water. Similarly do not plug in your heater if its surfaces are damp.
• Do not use the appliance on the same socket or electric circuit with other electrical appliances so as to prevent the circuit from being Overloaded, which will cause fire. Please do not prolong the power Cords by yourself or use a movable socket
• Unplug the heater by grasping plug and pulling it from the outlet. Never yank on the cord.
• lf the supply cord is damaged, it must be replaced by its service agent or a similarly qualified person in order to avoid hazards.
• Do not use in locations where the heater will be left unattended for long periods of time. (for example – several weeks in an unoccupied
• Do not use attachments not recommended and sold by Beko distributor.
• Loose connections between the heater plug and the electrical Outlet may cause the plug to overheat
• Ensure no other appliances are plugged into the same circuit as your heater. A Circuit overload could occur resulting in dimmed lights, blown fuses, tripped circuit breakers, or fire hazards.
• The heater is intended for household indoor use only.
• The heater must not be located immediately below a socket outlet.
  Warning: In order to avoid overheating, do not cover the heater
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool

Correct disposal of this product
This symbol indicates that this product shall not be disposed with other household wastes at the end ot its service lite. Used devices must be returned to an official collection point for the recycling of electrical and electronic devices. Totind these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs an important role in recovering and recycling of old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences tor the environment and human health. Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance
Warning: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Warning: This heater is not equipped with a device to control the room temperature. Do not use this heater
An in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant Supervision is provided.
Warning: The heater must not be used it the glass/ ceramic panels are damaged. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly,
Warning: In order to avoid overheating, do not cover the
heater do not use this heater it it has been dropped; do not use if there are visible signs of damage to the heater; use this heater on a horizontal and stable Surtace, or fix it to the wall, as applicable. Do not use this heater in small
Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Warning: In order to avoid overheating, do not cover the heater. do not use this heater it it has been drOpped; do not use it there are visible signs of damage to the heater; use this heater on a horizontal and stable surface, or Foxit to the wal, as applicable. Do not use this heater in Smal

Important safeguards
rooms when they are occupied by persons not capable ot leaving the room on their own, unless constant supervision is provided. To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distänce of I m from the air outlet.

Instructions for use

Features

1. PTCeffective heating
2. Intelligence thermostat
3. LED lights indicator
4. Automatic swing and heating with wide-angle
5. Overheating protection device
6. Tip-over safety protection device
7. Fireproof material for the entire machine
8. Dust filter

Components description

• Product structure
• Control panel

Operation method
Check before turning on the machine

• Check if the power wire is under good condition.
  1. The product adopts a 220-240V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe earthing device, otherwise, please replace it
     with the qualified socket.
• Put the machine on the flat place
  The uneven place may possibly cause the turnover switch at an abnormal position, then the heater can’t Work after turning on, therefore, please put the heater on the tlat place, at least the surtace below the base of the heater must be tlat
• Insert the power plug nto the socket to supply power, press the Power sWitch to enter into the
  Standby mode, and then operate in the operation panel.

Instructions for use

 

 

 

 

 

 

 

 

 

 

 

 

 

Others

Safety features

Thermal cut-off: Ihis heater includes a thermal cut-off that shuts the heater oft if it overheats due to abnormal conditions. If this occurs, turn the heater of, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, and then plug it back in and resume normal operation.

Tip-over switch: This heater includes a safety tip-over protection feature that will shut the heater off in case it is tipped over. If, at any time, the heater tips over, please put the heater back in the upright position. The heater will resume its normal operation.

Cleaning and maintenance

1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet) with a solution of mild detergent and water. Dry the case thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory and will require no further lubrication.
3. No other user maintenance is required or recommended. If service is required, send your heater to the nearest authorized service depot.
4. Store heater in a clean and dry place when not in use. Remember- portable electric heaters are designed tor spot heating. or as a supplementary heat Source. They are not intended to be main source of heat during the normal heating season.
   Note: There may be a trace of smoke or odor when unit is first operated. Do not be alarmed. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate, and should not re-occur.

 Technical parameters

All performance parameters in the table above were measured before delivery and are for reference only.