Toshiba TY-ASC51 Party Speaker Instruction Manual

TY-ASC51
Toshiba Portable Sound System
Operation Manual

Thank you for purchasing this Portable Sound System.
To use this product safely, read and understand this operation manual thoroughly before using it. After reading this manual, keep it in a safe place so that it can be referred to when necessary.

5029300

Safety precautions

The information you need to prevent danger to the user and other people, as well as property damage, is described below. “Description of signs” shows different categories of the degree of danger or damage that may occur due to wrong handling. “Description of symbols” shows the meaning of the symbols.

Important notes

• This book is only a guide for the user’s operation, not a criterion for configuration.
• Only use attachments/accessories specified by the manufacturer.

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Warning: To reduce the risk of electric shock, do not remove the cover (or back). NO user-serviceable parts inside. Refer RISK servicing to qualified service personnel.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

WARNING
– Minimum 5cm around the apparatus for sufficient ventilation.
– The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
– No naked flame sources, such as lighted candles, should be placed on the apparatus.

Description of signs

WARNING Indicates that there is a risk of death or serious injury.
CAUTION Indicates that there is a risk of light injury or property damage.

Description of symbols

Indicates “Prohibition” or “You must not do” with pictures and text.
Indicates “Mandatory Action” or “Do as indicated” with pictures and text.

What to do in the case of an abnormality 

WARNING

• Stop using the device immediately in the case of an abnormality or failure.
• Remove the power plug from the receptacle immediately when any water or foreign object enters the interior of the device.
  It may cause a fire or electric shock. Remove the power plug immediately, and contact your dealer for a repair.

What to do in the case of an abnormality

WARNING

• Stop using the device immediately in the case of an abnormality or failure.
• Remove the power plug from the receptacle immediately when any water or foreign object enters the interior of the device.
  It may cause a fire or electric shock. Remove the power plug immediately, and contact your dealer for a repair.

Power cord and power plug

WARNING

• If any dust exists on the power plug pin or pin installation surface, remove the power plug and remove the dust.
• The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.
• Observe the following when handling the power cord.
  •Do not damage it. •Do not modify it (e.g. extension).
  •Do not heat it. •Do not pull it. •Do not place a heavy object on it. •Do not pinch it. •Do not bend it forcefully.
  •Do not twist it. •Do not bundle it.
  Doing so may cause a fire or electric shock.
  
• Do not insert or remove the power plug with a wet hand.
  Doing so may cause a fire or electric shock.

CAUTION

• When removing the power plug from the receptacle, hold the power plug.
• If the device will not be used for a long time, remove the power plug from the receptacle.
  Doing so may cause a fire or electric shock.
  
• Do not use any power cord other than the one that comes with the device.
• Do not use the power cord that comes with the device for any other product.
  Doing so may cause a fire or electric shock.

Usage

WARNING

• Do not disassemble, repair, or modify the device.
• Do not insert any foreign object.
• When lightning starts, do not touch the antenna or power cord.
  Doing so may cause a fire or electric shock.
• The use of apparatus in moderate climates.

CAUTION

• Before carrying the device, retract the antenna and remove the power plug from the receptacle.
  Failure to do so may cause a fire, electric shock, or injury.
  
• Do not get on top of the device.
• Do not place a heavy object on the device.
• Do not block the ventilation hole.
• When the appliance coupler is used as the disconnect device, the appliance coupler shall remain readily operable.
• To prevent possible hearing damage, do not listen to high volume levels for long periods.
  Doing so may cause an injury or fire.

If you leave the unit unused for a long period of time, the built-in rechargeable battery will be in an over-discharge state due to self-discharge, and the charging capacity may deteriorate or the battery may be no longer rechargeable. Even if you are not using the unit, charge the battery once or twice a year for 7 hours each time.

Installation

WARNING

• Place the unit on a flat surface away from sources of direct sunlight or excessive heat.
• Do not install the device in a confined or build-in space such as a bookcase or similar area, and keep it under a well-ventilated condition.
  The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
• Do not expose the device to rain, moisture, dripping, or splashing.
• Do not place objects filled with liquids, such as vases, on the device.
  Doing so many causes a fire or electric shock.
  
• The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.
  Doing so many causes a fire or electric shock.

Notes
• If any color shift occurs on a nearby TV or the radio of this device picks up noise from the TV, keep this device away from the TV.

Disclaimer
• Toshiba shall not be responsible for any damage caused by an earthquake, thunderstorm, flood damage, fire for which Toshiba is not responsible, acts of a third party, other accidents, or damages caused by the user’s willful acts or negligence, misuse, or use in abnormal conditions.
• Toshiba shall not be responsible for any damage caused by failure to observe the information described in the operation manual.

Disposal
• When disposing of the device, observe the laws, ordinances, and rules of the local government.

Disposal
• Do not dispose of lead-acid batteries except through channels in accordance with local, state, and federal regulations.
• It is illegal to dump lead-acid batteries in landfills or dispose of them improperly. Please help our Earth by contacting the environmental protection agencies in your area, the battery manufacturer, or call
Toshiba toll-free at(800)231-1412 for more information about recycling.

About using Bluetooth®
This unit is designed for use with Bluetooth® wireless devices compatible with the A2DP and AVRCP streaming audio profiles. Refer to your
Bluetooth® device’s user manual or technical support to determine if your Bluetooth® device supports these profiles.

Frequency band used
This unit uses the 2.4 GHz, frequency band. However other wireless devices may use the 2.4 GHz frequency band as well and may cause interference with each other. To avoid interference, please refrain from the use of the unit at the same time as other wireless devices.

Certification of this device
This unit conforms to frequency restrictions and has received certification based on frequency laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
• Taking apart/modifying the unit.

Usage restrictions
• Wireless transmission and/or use with all Bluetooth® equipped devices is not guaranteed.
• A device featuring the Bluetooth® function is required to conform to the Bluetooth® standard specified by Bluetooth SIG, and be authenticated.
Even if the connected device conforms to the above-mentioned Bluetooth® standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

Range of use
Use this device within an unobstructed 10 m range. The range of use or perimeter may be shortened depending on any obstructions, devices causing interference, other people in the room, or the construction of the building. Please note that the range mentioned above is not guaranteed.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and are used under license.

Charging the battery
This unit has a built-in Lead Acid rechargeable battery.
1 To start charging the battery, connect the supplied AC cord to the socket on the back of the unit, then insert the plug into an AC receptacle.
The CHARGE indicator lights up in red while the battery is charging. When the battery is fully charged (around 6 to 7 hours), the CHARGE indicator turns green. When the battery voltage is low and needs to be recharged, the CHARGE indicator flashes red.

Part names

Basic functions

Turning the unit on/off
1 Turn the POWER switch to the ON or OFF position to turn the unit on/off.

Notes
• In USB/Bluetooth®/AUX mode, when no operation is performed for 15 minutes, the unit will automatically enter standby mode. To resume operation, press the FUNCTION/button.
Alternatively, turn the POWER switch to the OFF position and then switch to the ON position again to turn the unit on.

Setting the function mode
1 To change the function mode, press the FUNCTION button on the unit to select the USB /Bluetooth®/

AUX/FM function.
Adjusting the volume
1 Rotate the VOLUME knob on the unit to increase or decrease the volume.
The current volume level will be shown on the display.

Disco light function
1 Press the LIGHT button repeatedly to select the different lighting mode (L-1 to L-8 and OFF) of LED indicator light on the speaker.
L-1: Blue light flashing
L-2: Red light flashing
L-3: Greenlight flashing
L-4: Violet light flashing
L-5: Yellow light flashing
L-6: Light Blue light flashing
L-7: White light flashing
L-8: 7 color light flashing
The color changes to blue, red, green, violet, yellow, light blue, and white and then continuously change between the 7 different colors.

Equalizer function
1 Press the EQ button repeatedly to select the different equalizer modes. Select the mode (FLAT, POP, CLASSIC, JAZZ, and ROCK) that best matches the music style. The
display will show the selected equalizer mode (either “FLAT”, “POP”, “CLASSIC”, “JAZZ”, or “ROCK”). Bass
1 Press the BASS button to switch the bass on/off.
The “BASS” will be shown on the display when switched on.

Microphone echo
1 Press the ECHO button to switch the microphone echo on/off.
The “ECHO” will be shown on the display when switched on.

USB operation

Listening to a USB device
This unit provides a USB port for music playback.

1. Press the FUNCTION button on the unit to select USB mode.
2. Connect a USB memory stick to the USB port on the top of the unit.
   The display will show the total number of folders for 2 seconds and then show the total number of playable tracks on the USB device.
3. To playback and resume playback, press the / / AUTO button.
   The elapsed time and the “ ” will be shown on the display.
4. To pause playback, press the / / AUTO button on the unit.
   The elapsed time and the “” will be displayed blinking on the display.
5. To select the desired track, press the / TUN. or / TUN. button either while playing or while paused until the desired track appears on the display.
   The unit will start playing automatically.
6. To search for a particular passage during playback, press and hold the / TUN. or / TUN. button to fast forward and fast backward until the desired point (passage) is reached, then release the button for normal playback.
   Playback will start again from this point.
7. To jump to +/- 10 tracks, press the or (10/M./FOLD.) button.
8. To select +/- folder, press and hold the or (10/M./ FOLD.) button.

Random Play

1. Press the P-MODE / M. button on the unit until “RAND” appears on the display.
   The random play will start from next track automatically.
2. To cancel repeat play, press the P-MODE / M. button on the unit until “RAND” disappears from the display.

Charging the device connected to the USB CHARGE port 
You can charge a device connected to the USB CHARGE port on the unit.
1 Connect the device to the USB CHARGE port on the top of the unit.
Charging of the connected device will start.

Notes

• Charging may not be possible for devices with a low current capacity (battery capacity of about 50 mAh or less).
• Devices cannot be charged when the unit is off due to low battery.
• To charge the mobile device connected to the USB CHARGE port, first connect the USB connector cable to the mobile device and then connect to the USB connector on the unit side. Charging may not start if you first connect to the USB connector on the unit side and then to the mobile device.
• When you make the AUX connection and USB charge connection to the same mobile device, first connect the mobile device to the USB CHARGE port for charging and then make the AUX connection. Charging may not start if the AUX connection is made before USB charging.
• Even if you insert a USB memory stick into the USB CHARGE port, the unit will not playback music.

Bluetooth® operation

1. Press the FUNCTION button on the unit to select the Bluetooth® mode.
   The display will show “bt” and the PAIR indicator will start blinking and the unit plays the notification sound.
2. Following the instructions in your device’s user manual, activate Bluetooth® on your device and search for the unit “TY-ASC51” and connect. Input the password “0000” if required.
   The PAIR indicator will light up and the unit plays the notification sound.
3. Control playback with the external device.
4. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the volume as desired.

Notes

• Press and hold the / / AUTO button to disconnect the Bluetooth®.
• You can playback and pause playback by pressing the / / AUTO button.
• You can select a desired track by pressing the / TUN. + or / TUN. button –.
• The Bluetooth® works best within 10 meters.

AUX IN operation

1. Press the FUNCTION button on the unit to select “AUX” mode.
2. Connect your audio device to the AUX input jack of the unit with an audio cable.
3. Control playback with the external device.
4. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the volume as desired.

FM operation

Listening to FM radio

1. Press the FUNCTION button on the unit to select “FM” mode.
2. Press the / TUN. + or / TUN. button to tune in the station.
   Press and hold the / TUN. + or / TUN. button to perform automatic tuning. Tuning stops automatically when a station is received.
   • Automatic tuning may stop due to reception noise. In such a case, perform automatic tuning again.
3. Rotate the VOLUME knob on the unit to increase or decrease the volume.

Automatic tuning preset
Press and hold the / / AUTO button. The device will automatically tune in and preset all of the stations that can be received in your area up to 30 preset channels.

Manual tuning preset

1. Select the desired station by manual tuning or auto stop tuning.
2. Press the P-MODE / M. button.
   Preset number will be displayed blinking.
3. Presss the +or– (10/M./FOLD.) button to select the preset number.
   You may select from “P01” to “P30”.
   Note
   • If you do not perform the operation within 5 seconds, the device will automatically return to the normal reception mode.
4. Press the P-MODE +/– M. button again.
   Preset number lights up. The preset number will be preset.
   Select the preset radio stations
   When radio signals are received, press the or (10/M./FOLD.) button.
   • Each time you press the button, the Preset number and frequency of the radio station are displayed.

MIC jack operation

Microphone input is available in all modes.

1. Connect your microphone to the 6.3 mm MIC 1 or MIC 2 jack of the unit.
2. Rotate the MIC VOL. knob on the unit to increase ordecrease the volume.

Maintenance

Maintenance of the main unit
Wipe off stains lightly with a soft cloth. If a stain is severe, wipe it off with a cloth dampened with neutral detergent solution and wrung tightly, and dry it with a dry cloth.
• Do not use benzene or thinner, etc. Do not spray any volatile chemical such as insecticide on the cabinet.

When you suspect a failure

Specifications

USB memory section

Bluetooth® section

Terminal

General

The specifications and appearance may be subject to modification without prior notice.

Notes

• If the device does not operate or display properly while the USB device is played back, press the POWER ON/OFF switch once to turn off the power, and remove the AC cord and connect it again. Then, set the device back to the USB mode and play back the USB device.
• The cabinet becomes slightly hot in some parts when the device has been used for a long period of time. It is not a malfunction

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

LIMITED WARRANTY

USE OF THE DEVICE MEANS YOUR AGREEMENT TO THE TERMS OF THIS WARRANTY. PLEASE READ THIS WARRANTY CAREFULLY BEFORE USING. DO NOT USE THE DEVICE IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY AND RETURN THE UNUSED DEVICE TO YOUR RETAILER FOR A REFUND OF THE FUNDS.

This warranty is valid for a period of 2 (Two) years from the date of purchase of the Device. This warranty is in addition to and in no way restricts the constitutional rights of consumers. The warranty service of the Device is carried out only under the condition of strict observance of the operating rules and safety requirements specified in the accompanying documentation for the Device. If during the warranty period any factory defects are found in the Device, they will be eliminated free of charge.

Please refer to the troubleshooting tips at https://service.uniondistribution.eu before starting the procedure for obtaining warranty service. If the troubleshooting tips did not help resolve the issue, follow the online procedure at https://service.uniondistribution.eu or call the customer support service at the phone number for your country of residence at https://service.uniondistribution.eu.

If the company determines that the device malfunctioned under Normal Conditions of Use in accordance with the instructions for use, during the Warranty Period, the company will repair or replace the device or refund the purchase price to you, provided that local laws applicable to you is not provided otherwise.

During the repair, new or remanufactured parts can be used. The device can be replaced with a new or refurbished device. All replaced Devices and/or their components or accessories are the property of the company. Repair or replacement may include installing the latest system or firmware. The replaced component or device is warranted for the greater of three (3) months or the remainder of the original warranty period.

Warranty Limitations

This warranty does not apply if:

• changed, deleted or illegible serial number of the Device. This warranty is void if the Device is damaged as a result of:
• mechanical damage, ingress of liquid or other foreign objects (including insects) inside the product;
• lightning strike, fire, flooding, lack of ventilation and other reasons beyond the control of the manufacturer;
• use of products in violation of the instructions for use;
• repair or adaptation of the Device carried out by any person or organization, except for authorized service partners.
• if damages (deficiencies) are associated with non-compliance with the standard of telecommunication, cable and power supply networks, radio signal power, including due to terrain features and other external factors, at the border or outside the network coverage area, connection to other faulty or inappropriate devices.
• changing the device software: changing the internal firmware of the device, installing non-recommended software, problems when entering into the program code of the device, problems when using third-party software, including, for example, attempts to overcome any technical limitations, security system or copyright protection devices rights, etc. or use in conjunction with any unauthorized programs, infection and / or viruses.

This warranty does not cover and is not responsible for possible harm directly or indirectly caused by the product to people, property or animals, if this happened as a result of non-observance of the rules of operation, willful or negligent actions of the buyer or third parties. Likewise, no liability is accepted for possible harm directly or indirectly caused by the device as a result of loss, damage or alteration of user data or information. If the parameters of the device do not comply with local legislation, the user should not use the device or additional options.
This warranty applies to Devices purchased for personal and nonprofit use.

Warranty and service information

https://www.uniondistribution.eu/downloads/

This device complies with the Technical Regulations for Radio
Equipment according to Directive 2014 / 53EU; The full text of the declaration of conformity is available on the website at: https://www.uniondistribution.eu/downloads/