SEALEY DBG509.V2 35-50MM Dial Bore Gauge Instructions
Instructions
MODEL NO: DBG509.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT IS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
WARNING! Ensure Health and Safety, local authority, and general workshop practice regulations are adhered to when using tools and equipment.
INTRODUCTION
Precision mechanism with Ø58mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 1mm with an accuracy of 0.01mm. The probe body, dial indicator, anvils, and locking nut are also included. Supplied in BMC.
SPECIFICATION
Model No.: ………………………………………………….. DBG509.V2
Dial Diameter: ………………………………………………….. Ø58mm
Maximum Deviation Measurement with Stem: …………… 1mm
Maximum Deviation Measurement, Gauge: …………….. 10mm
Range: ………………………………………………………… 35 – 50mm
Resolution: ………………………………………………………. 0.01mm
CONTENTS
MAINTENANCE
5.1. Keep all components dry and clean with a soft microfiber cloth.
5.2. Return all items to the presentation case after use.
5.3. Store indoors in a temperature-controlled dry environment, circa 21°C.
5.4. This is a precision instrument intended for use by engineers and engineering inspectors, to keep it out of reach of children.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice. Please note that their versions of this product are available. If you require documentation for alternative versions, please email or call our technical team at [email protected] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
© Jack Sealey Limited
Original Language Version
DBG509.V2 Issue 1 18/03/22
