LG SL4R Wireless Sound Bar User Guide

LG SL4R Wireless Sound Bar

SIMPLE MANUAL

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

IN THE BOX

Front Panel

  • (Standby): ·Switches the unit ON or OFF.
  • (Function): Selects function.
  •  (Volume):  Adjusts volume.

Rear Panel

  • DC IN: Connect to the AC adapter.
  • OPTICAL IN: Connect to an optical device.
  • USB Port: Connect to a USB device.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

  • Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
  • Turn on the sound bar.
  • The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s yellow – green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

  • Press PAIRING on the rear of the wireless subwoofer.
    • The yellow – green LED on the front of the wireless subwoofer blinks quickly. (If the yellow – green LED does not blink, press and hold the PAIRING.)
  • Turn on the sound bar.
    • Pairing is completed. The yellow – green LED on the front of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.

TV Connection

  1.  Connect the sound bar to the TV using Optical cable.
  2.  Set up [External Speaker (Optical)] on your TV setting menu.

Additional Device Connection

  • Connect to the external device like as follow.

  • set the input source by pressing F repeatedly.

Remote control

  • Skip/Search
  • Play/Pause
  • Bluetooth connection lock (BT LOCK)
  • Select  the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit
  • Bluetooth connection to only BT and LG TV.
  • SOUND EFFECT: Selects a sound effect mode.
  • TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
  • FOLDER W/S: Searches a folder.
  •  Displays the information of a file, an input source or connected Bluetooth device name.
  •  Auto Power ON/OFF: Long press J and press it again.
  • Adjusts sound level of each speaker.
  • Surround sound: Long press and press it again. REPEAT: Listens to your files repeatedly or randomly.

Replacement of Battery

Specification

Power consumption Refer to the main label.
 

 

 

 

 

 

 

AC adapter

 •   Model : DA-38A25

•   Manufacturer : Asian Power Devices Inc.

•   Input : 100 – 240 V ~ 50 – 60 Hz

•   Output : 25 V 0 1.52 A

•   Model : MS-Z1520R250- 038A0-P

•   Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO., LTD.

•   Input : 100 – 240 V ~ 50/60 Hz

•   Output : 25 V 0 1.52 A

 

Dimensions (W x H x D)

 Approx.

890.0 mm X 57.0 mm X

85.0 mm With foot

(35 inch x 2.2 inch x 3.3 inch)

Bus Power Supply (USB)  

5 V 0 500 mA

Amplifier (Total RMS Output power)  

420 W RMS

Rear Surround sound

Wireless Rear Speakers Kit included for real surround sound. (SPJ4-S)

Industry Canada Statement

[For having wireless function (WLAN, Bluetooth,…)] This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,…)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

WARNING
[For product having the wireless function using 5 GHz frequency bands]

  1. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
  2.  for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.  limit;
  3. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the limits as appropriate; and
  4. [for devices operating in the band 5250-5350 MHz having an. greater than 200  antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.