HP 9010 Series OfficeJet Pro All-in-one Printer User Guide

hp 9010 Series OfficeJet Pro All-in-one Printer

Reference Guide

Follow the instructions in the poster to begin printer setup.
Note: If you have problems connecting the printer to your wireless network, try turning the printer off and then on again to enable the printer to be detected.

Set up a wireless connection

By following the instructions on the printer control panel and installing the HP printer software or the HP Smart app, you should have successfully connected the printer to the wireless network.
For more information, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting).

Solve wireless problems

When the (Wireless light) remains lit, the printer has successfully connected to your wireless network. If not, please check the following solutions.

Convert from a USB connection to a wireless connection
Learn more: www.hp.com/go/usbtowifi

Use the printer wirelessly without a Wi-Fi network (Wi-Fi Direct)
With Wi-Fi Direct, you can connect your computer or mobile device (such as a smartphone or tablet) directly to a printer wirelessly—without connecting to an existing wireless network.

Note: To use Wi-Fi Direct, you might need HP software installed on your computer or mobile device. For more information, visit 123.hp.com.
Tip: To learn about printing with Wi-Fi Direct, visit the Wi-Fi Direct Printing website
(www.hp.com/go/wifidirectprinting).

Set up fax

Set up fax from the printer control panel. For more information, visit www.hp.com/support.

Learn more

Limited warranty

HP one-year hardware limited warranty.
For full terms and conditions, visit www.hp.com/go/orderdocuments.