Electrolux M3GCP300 Super Care Descaler for Washing Machines and Dishwashers Instructions
Electrolux M3GCP300 Super Care Descaler for Washing Machines and Dishwashers
Descaler for Washing Machines and Dishwashers Instructions
Place the entire contents of one sachet into the empty washing machine and run a 60°C programme without pre-wash.
Dishwasher: start an intensive cycle without loading. After 30 minutes open the door carefully; because in some models it can be very warm. Then empty the content on the bottom of the tub, close the door and let the cycle finish. If you have dedicated maintenance cycle on your dishwasher: pour the entire contents of one sachet on the bottom of the tub and start the maintenance cycle. The appliance must be empty. Do not add additional detergent during treatment. Perform a treatment every six months.
Was this manual helpful?
Thank you for your feedback!