KENWOOD KVC30 Chef Stand Mixer for Baking – Stylish Food Mixer Instructions

TYPE KVC30 (Chef)
TYPE KVL40 (Chef XL)
instructions

Know your Kenwood Kitchen Machine
Congratulations on buying a Kenwood. With such a wide range of attachments available, it is more than just a mixer. It is a state-of-the-art Kitchen Machine. We hope you will enjoy it.
Robust. Reliable. Versatile. Kenwood.

Safety

• Read these instructions carefully and retain them for future reference.
• Remove all packaging and any labels.
• If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorized KENWOOD repairer.
• Turn the speed control to the ‘O’ OFF position and unplug before fitting or removing tools/attachments, after use, and before cleaning.
• Keep your fingers away from moving parts and fitted attachments.
• Never leave the Kitchen Machine unattended when it is operating.
• Never use a damaged appliance. Get it checked or repaired: see ‘service and customer care section.
• Never operate the Kitchen Machine with the head in the raised position.
• Never let the cord hang down where a child could grab it.
• Never let the power unit, cord, or plug get wet.
• Never use an unauthorized attachment or more than one attachment at once.
• Never exceed the quantities stated in the maximum capacity chart.
• When using an attachment, read and follow the safety instructions that are supplied with it.
• Take care when lifting this appliance as it is heavy. Ensure the head is correctly latched in the down position and that the bowl, tools, outlet covers and cord are secure before lifting.
• Take care when removing bowl tools after extended use as they may get hot.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not move or raise the mixer head with an attachment fitted as the Kitchen Machine could become unstable.
• Do not operate your appliance near the edge of a work surface.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
• Misuse of your appliance can result in injury.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• The maximum rating is based on the attachment that draws the greatest load. Other attachments may draw less power.
• Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Before plugging in

• Make sure your electricity supply is the same as the one shown on the underside of your machine.
• This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.

Before using it for the first time

• Wash the parts: see the ‘care and cleaning’ section.

Key

Attachment outlets

1. high-speed outlet
2. slow-speed outlet
3. bowl tool socket
   Mixer
4. high speed outlet cover
5. mixer head
6. speed and pulse control
7. power unit
8. head release lever
9. bowl seating pad
10. k bowl
11. slow speed outlet cover
12. K-beater
13.  whisk
14. dough hook
15.  spatula
16.  splashguard

Optional attachments
There is a range of optional attachments available to use with your Kitchen Machine. See the attachment leaflet included in your pack or visit www.kenwoodworld.com to see the full range and how to buy an attachment not included in your pack.

Note: Slow Speed outlet attachments
The slow-speed outlet on your Kitchen Machine model features the Twist Connection System. It is designed to accept Twist Connection System attachments.
When purchasing new attachments for the slow-speed outlet you should check compatibility with your Kitchen Machine. All Twist Connection System attachments can be identified by the product code which starts with KAX and also by the Twist logo which is visible on the packaging. For more information visit  www.kenwoodworld.com/twist.
If you own attachments featuring the Bar Connection System you will need to use the KAT002ME adaptor to connect these to the Twist Connection System on your Kitchen Machine. For more information visit www.kenwoodworld.com/twist.

The bowl tools and some of their uses
K-beater
For making cakes, biscuits, pastry, icing, fillings, éclairs and mashed potato.
Dough Hook
For yeast mixtures only.
Whisk
For eggs, cream, batters, fatless sponges, meringues, cheesecakes, mousses, soufflés. Do not use the whisk for heavy mixtures (e.g. creaming fat and sugar) – you could damage it.

To use your bowl tools

1. Turn the head lift lever anti-clockwise and raise the mixer head until it locks 2. Ensure the bowl seating pad 9 is correctly fitted with the symbol uppermost.
2. Fit the bowl on the base, press down and turn clockwise 3 to secure in position.
3. Place the required tool into the socket. Then push up 4 and turn 5 the tool to lock into position.
   Note: If the K-beater or Whisk are not picking up ingredients from the bottom of the bowl refer to the “Tool Adjustment” section.
4. Lift the mixer head slightly then turn the head-lift lever anti-clockwise and lower the mixer head until it locks.
5. Start the machine by turning the speed control 6 to the desired speed setting. Use the pulse (P) position for short bursts of maximum speed.
6. After use, return the speed control to the ‘O’ OFF position and unplug your Kitchen Machine.
7. Release the tool by turning clockwise to unlock it from the tool socket and then remove it.

Hints

• To fully incorporate the ingredients stop mixing and scrape down the bowl with the spatula frequently.
• For best results when whisking use eggs at room temperature.
• Before whisking egg whites, make sure there is no grease or egg yolk on the whisk or bowl.
• Use cold ingredients for pastry unless your recipe says otherwise.

Points for bread making Important

• Never exceed the maximum capacities stated – you may overload the machine.
• If you hear the machine laboring, switch off, remove half the dough and do each half separately.
• The ingredients mix best if you put the liquid in first.

Yeast

• Dried yeast (the type that needs reconstituting): pour the warm water into the bowl. Then add the yeast and the sugar and leave to stand for about 10 minutes until frothy.
• Fresh yeast: crumble into the flour.
• Other types of yeast: follow the manufacturer’s instructions.
• Put the dough into a greased polythene bag or a bowl covered with a tea towel. Then leave it somewhere warm until doubled in size.

Important
Ensure that no bowl tools are fitted or stored in the bowl when using other outlets.

* Eggs sizes used = medium-sized (Weight 53 – 63g)

To fit and use your Splashguard

1. Raise the mixer’s head until it locks.
2. Fit the bowl onto the base.
3. Push the splash guard onto the underside of the mixer head 6 until fully located. The hinged section should be positioned as shown.
4. Insert required tool.
5. Lower the mixer head.
   • During mixing, ingredients can be added directly to the bowl via the hinged section of the splash guard 7.
   • You do not need to remove the splash guard to change tools.
6. Remove the splashguard by raising the mixer head and pushing it down.

Tool Adjustment

K-beater & Whisk
The tools are set to the correct height for the bowl supplied in the factory and should not require adjustment. However, if you wish to adjust the tool use a suitable sized spanner:
TYPE KVC30 = 15mm
TYPE KVL40 = 19mm
Then follow the instructions below:

1. Unplug the appliance.
2. Raise the mixer head and insert the whisk or beater.
3. Lower the mixer head. If the clearance needs to be adjusted, raise the mixer head and remove the tool. Ideally, the whisk and K-beater should be almost touching the bottom of the bowl 8.
4. Using a suitable spanner loosen the nut sufficiently to allow adjustment of the shaft 9. To lower the tool closer to the bottom of the bowl, turn the shaft anticlockwise. To raise the tool away from the bottom of the bowl turn the shaft clockwise.
5. Re-tighten the nut.
6. Fit the tool to the mixer and lower the mixer head. (Check its position see points above).
7. Repeat the above steps as necessary until the tool is set correctly. Once this is achieved tighten the nut securely.
   • Note: Spanner shown is for illustration purposes only.

Dough Hook
This tool is set at the factory and should require no adjustment.

Care & Cleaning

• Always switch off and unplug before cleaning.
• A little grease may appear at the slow-speed outlet 2 when you first use it. This is normal – just wipe it off.

Power Unit And Outlet Covers

• Wipe with a damp cloth, then dry.
• Never use abrasives or immerse in water.

Bowl

• Wash by hand, then dry thoroughly or wash in the dishwasher.
• Never use a wire brush, steel wool or bleach to clean your stainless steel bowl. Use vinegar to remove limescale.
• Keep away from heat (cooker tops, ovens, microwaves).

Tools & Splashguard

• Wash by hand, then dry thoroughly or wash in the dishwasher.

recipe

chilli marinade
200g clear runny honey 1 chilli (whole) 20g (1tsp) crunchy peanut butter Seasoning

1. Place all the ingredients into the mini chopper/mill.
2. Fit the attachment to the Kitchen Machine and allow the ingredients to settle around the blade.
3. Switch to max speed for 4 seconds.
4. Use as required.

Service and Customer Care

• If you experience any problems with the operation of your appliance, before requesting assistance refer to the “troubleshooting guide” section in the
  manual or visit www.kenwoodworld.com.
• Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
• If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.
• Designed and engineered by Kenwood in the UK.
• Made in China.

Service and Customer Care

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Troubleshooting guide

HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
kenwoodworld.com

CREATE MORE