LG 24MP450 23.8 Inch Full HD LED IPS Monitor Owner’s Manual

24MP450 23.8 Inch Full HD LED IPS Monitor
Owner’s Manual

* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

ASSEMBLING AND PREPARING

CAUTION

Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommended to use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image problems.
Illustrations in this document represent typical procedures, so they may look different from the actual product.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.

NOTE

The components may look different from those illustrated here.
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
The power cord provided may differ depending upon the region.

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software	Installation Priority
Monitor Driver	Recommended
OnScreen Control	Recommended

Product and Button Description

How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/down with your finger.

Basic Functions

		Power on	Press the joystick button once with your finger to turn on the monitor.
		Power off	Press and hold the joystick button once with your finger to turn off the monitor.
		Volume control	You can control the volume by moving the joystick button left/right.(for HDMI/DP only)

NOTE

The joystick button is located at the bottom of the monitor.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

Place the monitor in the original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
When holding the monitor, the screen should face away from you to prevent it from being scratched.
When transporting the monitor, do not expose the monitor to shock or excessive vibration.
When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

Avoid touching the monitor screen as much as possible.
– This may result in damage to the screen or some of the pixels used to create images.
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Installing on a Table

Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation.

CAUTION

Unplug the power cord before moving or installing the monitor. There is a risk of electric shock.
Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Stand Height 24MP450 27MP450 27MQ44B

Place the monitor mounted on the stand base in an upright position.
Handle the monitor with both hands for safety.

WARNING

When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

Adjusting the Angle

Place the monitor mounted on the stand base in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.

WARNING

To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Using the Kensington Lock
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.

NOTE

The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.

NOTE

The wall mount plate is sold separately.
For more information on installation, refer to the wall mount plate’s installation guide.
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen.
Remove the stand before installing the monitor on a wall mount by performing the stand attachment in reverse.

Installing on the Wall
Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches) of space on each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

Wall Mount (mm)	75 x 75
Standard screw	M4 x L10
Number of screws	4
Wall Mount Plate (Optional)	LSW 149

NOTE

A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
The wall mount kit includes the installation guide and all necessary parts.
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard length, it may damage the inside of the product.
For more information, please refer to the user manual for the wall mounting bracket.

CAUTION

Unplug the power cord before moving or installing the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty.
When measured from the back of the monitor, the length of each installed screw must be 8 mm(0.3 inches) or less.

USING THE MONITOR

Illustrations in this manual may differ from the actual product.

CAUTION

Do not press the screen for a prolonged time. This may cause image distortion.
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC screensaver if possible.
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on the screen. This is normal.

Connecting to a PC

This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers.

D-SUB connection
Transmits analog video from your PC to the Monitor set.

NOTE

When using a D-Sub signal input cable connector for Macintosh
Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15-pin high density (3-row) D-SUB VGA connector on the supplied cable to a 15-pin 2-row connector.

HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.

CAUTION

Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
Recommended HDMI cable types
– High-Speed HDMI®/TM cable
– High-Speed HDMI®/TM cable with Ethernet

DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.

NOTE
• There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort) cable or gender that supports DisplayPort1.4. (sold separately)

Connecting AV Devices

HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
Recommended HDMI cable types
– High-Speed HDMI®/TMcable
– High-Speed HDMI®/TMcable with Ethernet

Connecting Peripherals

Connecting Headphones
Connect peripherals to the monitor via the headphones port.

NOTE

Peripheral devices are sold separately.
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited.

USER SETTINGS

NOTE

Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
When Beep Guide is activated, pressing the joystick button will take you to Settings right away.

Activating the Main Menu

1. Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down and left/right to set the options.
3 Press the joystick button once more to exit the main menu.

Button	Menu Status		Description
	Main menu disabled		Enables the main menu.
	The main menu enabled		Exits the main menu. (Holding down the button for more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
	◀	Main menu disabled	Adjusts the monitor volume level.(for HDMI/DP only)
		Main menu enabled	Enters the Input features.
	▶	Main menu disabled	Adjusts the monitor volume level.(for HDMI/DP only)
		Main menu enabled	Enters the Settings feature.
	▲	Main menu disabled	Enters the Accessibility menu.
		Main menu enabled	Tams off the monitor.
	▼	Main menu disabled	Enters the Accessibility menu.
		Main menu enabled	Enters the Picture Mode feature. (for HDMI/DP only)

Main Menu Features

Main Menu	Description
Input	Sets input mode.
Power Off	Turns off the monitor.
Settings	Configures the screen settings.
Picture Mode	Sets the picture mode.
Exit	Exits the main menu.
Auto Configuration	Operate the Auto configuration for optimal display in D-SUB.

Menu Settings

To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
Move the joystick up/down and left/right to set the options.
To return to the upper menu or set other menu items, move the joystick to ◀or press () it.
If you want to exit the OSD menu, move the joystick to ◀until you exit.

Customizing settings

Quick Settings

Settings > Quick Settings	Description
Brightness	Adjusts the color contrast and brightness of the screen.
Contrast
Volume	Adjusts the volume level.
Auto Configuration	No	Cancel the select.
	Yes	Operate the Auto configuration for optimal display in D-SUB.

Input

Settings > Input	Description
Input List	Selects the input mode.
Aspect Ratio	Adjusts the aspect ratio of the screen.
	Full Wide	Displays the video on a widescreen, regardless of the video signal input.
	Original	Displays video according to the aspect ratio of the video signal input.
	NOTE • The options may be disabled at the recommended resolution (1920 x 1080).

Picture

Settings > Picture	Description
Picture Mode	Custom	Allows the user to adjust each element. The color mode of the main menu can be adjusted.
	Reader	Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
	Photo	Optimizes the screen to view photos.
	Cinema	Optimizes the screen to improve the visual effects of a video.
	Color Weakness	This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.
	Game	Optimizes the screen for gameplay.

NOTE

If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
This is a subsidiary of color weakness users. Therefore if you feel uncomfortable with the screen, please turn off this function.
This function can’t distinguish some colors in some images.

Settings> Picture	Description
Picture Adjust	Brightness	Adjusts the brightness of the screen.
	Contrast	Adjusts the contrast of the screen.
	Sharpness	Adjusts the sharpness of the screen.
	SUPER RESOLUTION+	Off	Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
		High	Optimized picture quality is displayed when a user wants crystal dear images. It is effective for high-quality video or games.
		Middle	The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing. It is effective for UCC or SD video.
		Low	The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for slow-moving pictures or still images.
		NOTE • Because this is a function to increase the sharpness of low-resolution pictures, it is not recommended to use the function for normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
	Black Level	Sets the offset level (for HDMI only). • Offset: as a reference for a video signal, this is the darkest color the monitor can display.
		High	Keeps the current contrast ratio of the screen.
		Low	lowers the black levels and raises the white levels from the current contrast ratio of the screen.
	DFC	On	Adjusts the brightness automatically according to the screen.
		Off	Disables the DFC feature.

Game Adjust	Response Time	Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Fast. For fast-moving pictures, it is recommended that you use Faster. Once Faster Mode is selected, Motion Blur may occur depending on the content.
		Faster	Sets the response time to faster.
		Fast	Sets the response time too fast.
		Normal	Sets the response time to normal.
		Off	Does not use the response time improvement feature.
	FreeSync	Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal. CAUTION • Supported Interface: HDMI/DP • Supported Graphics Card: A graphi«ard that supports AMD’FreeSync is necessary. • Supported Version: Make sure to update the graphic card to the latest driver. •For more information and requirement, refer to the AMD website at http://wwwamd.com/FreeSync
		On	FreeSync function on.
		Off	FreeSync function off
	Black Stabilizer	You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
	Crosshair	Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the Crosshair that fits their gaming environment among four different crosshairs.

Color Adjust	Gamma		Mode 1, Mode 2, Mode 3	The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
			Mode 4	If you do not need to adjust the gamma settings, select Mode 4.
	Color Temp		Selects the factory default picture color. Custom: The user can adjust it to red, green, or blue by customization. Warm: Sets the screen color to a reddish tone. Medium: Sets the screen color between a red and blue tone. Cool: Sets the screen color to a bluish tone.
	Red		You can customize the picture color using Red, Green, and Blue colors.
	Green
	Blue
Configuration Adjust (D-SUB only)	Horizontal		To move the image left and right.
	Vertical		To move the image up and down.
	Clock		To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change.
	Phase		To adjust the focus of the display. This item allows you to remove any horizontal noise and dear or sharpen the image of characters.
Resolution (D-SUB only)	The user can set the desired resolution. This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).
	NOTE • The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.
	1024×768, 1280×768, 1360×768, 1366×768,0ff
	1280×960, 1600×900,0ff
	1440×900, 1600×900,0ff
Picture Reset	Do you want to reset your settings?	No		Cancel the select.
		Yes		Returns to the default settings.

General

Settings > General	Description
Language	To choose the language in which the control names are displayed.
SMART ENERGY SAVING	High	Enables SMART ENERGY SAVING you can save energy with this energy- high efficiency.
	Low	Enables SMART ENERGY SAVING you can save energy with this energy- low efficiency.
	Off	Disables SMART ENERGY SAVING.
	* SMART ENERGY SAVING: Conserve energy by using a luminance compensation algorithm.
Automatic Standby	A feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (8H, 6H, 4H, and Off)
OSD Lock	Prevents incorrect key input.
	On	I Key input is disabled.
	NOTE • All functions except for the OSD Lock mode, brightness, Contrast Input, Information, and Volume are disabled.
	Off	Key input is enabled.
Information	The display information will be shown the Model, Total Power On Time, Serial Number, and Resolution.
Reset	Do you want to reset your settings?	No	Cancel the select.
		Yes	Returns to the default settings.

NOTE

The value of energy-saving data may differ depending on panel and panel suppliers.
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance becomes lower or higher depending on the source.

TROUBLESHOOTING

Check the following before calling for service.

No image appears
Is the power cord of the display connected?	• Check and see if the power cord is connected properly to the power outlet.
Do you see an “Out of Range” message on the screen?	• This message appears when the signal from the PC (video card) is out of the horizontal or vertical frequency range of the display. See the ‘Specifications’ section of this manual and configure your display again.
Do you see a “NO SIGNAL” message on the screen?	• After the monitor is on “NO SIGNAL”, the monitor goes to DPM mode. • This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
Can’t you control some functions in OSD?
Can’t you select some menu in OSD?	• You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.

CAUTION

Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommended resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated, or biased. Make sure to select the recommended resolution.
The setting method can differ by computer and O/S (Operation System), and the resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.

Display Image is Incorrect
The screen color is mono or abnormal.	• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks.	• Check if the screen is set to interlace mode and if yes, change it to the recommended resolution.
Do you see an “Unrecognized monitor, Plug&Play (VESA DDC) monitor found” message?
Have you installed the display driver?	• Be sure to install the display driver from our website: http://www.lgtom. • Make sure to check if the video card supports the Plug&Play function.
The screen Is flickering.
Did you select the recommended resolution?	• If the selected resolution is HDMI 1080160/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.

PRODUCT SPECIFICATION

22MP44B

Color Depth	8-bit color is supported.
Resolution	Max Resolution	1920 x 1080 @ 75 Hz (HDMI/DP) 1920 x 1080 @ 60 Hz (D-Sub)
Resolution	Recommended Resolution	1920 x 1080 @ 60 Hz
Power Sources	Power Rating	19V 1.3 A
Power Sources	Power Consumption	On mode: 19 W Typ. (Typical)* Sleep Mode (Standby Mode) s 0.3 W** Off Mode s 0.3 W
AC/DC adaptor	Type ADS-4056-19-3 190256, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-40FSG-19 19025610-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC, or Type KAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE, or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE, or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE, or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE, or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,

AC/DC adaptor	or Type WA-24C19FS, manufactured by Asian Power Devices Inc., or Type WA-24C19FN, manufactured by Asian Power Devices Inc., or Type DA-24819, manufactured by Asian Power Devices Inc., or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139520, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.. Output 19 V 1.3A
Environmental Conditions	Operating Conditions	Temperature	0 °C to 40 °C
	Operating Conditions	Humidity	Less than 8096
	Storing Conditions	Temperature	-20 °C to 60 °C
	Storing Conditions	Humidity	Less than 85 96
Dimensions	Monitor Size (Width x Height x Depth)
	With Stand	511.6 x 383.5 x 190.0 (mm)	20.1 x 15.0 x 7.4 (inches)
	Without Stand	511.6 x 295 x 40.2 (mm)	20.1 x 11.6 x 1.5 (inches)
Weight (Without Packaging)	With Stand	2.5 kg	5.5 lbs
Weight (Without Packaging)	Without Stand	2.1 kg	4.6 lbs

The specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol means direct current.
The power consumption level can be different to operating conditions and monitor settings.
* The On mode power consumption is measured with the LGE test standard (Full White pattern, Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).

Factory Support Mode (Preset Mode, PC)

D-SUB

Preset Mode	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Polarity (H/V)	Remarks
720 x 400	31.	70.	-/+
640 x 480	31.	60.	-I-
640×480	38.	75	-I-
800×600	38.	60.	+/+
800 x 600	47.	75	+/+
1024 x 768	48.	60	-/-
1024 x 768	60.	75.	+/+
1152 x 864	67.500	75	+/+
1280 x 1024	64.	60.	+/+
1280 x 1024	80.	75.	+/+
1680 x 1050	65.290	60.	-/+
1920 x 1080	67.500	60	+/+	Recommend Mode

HDMI/DisplayPort

Preset Mode	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Polarity (HIV)	Remarks
720 x 400	31.	70.	-It
640 x 480	31.	60.	-I-
640×480	38.	75	-/-
800 x 600	38.	60.	+/+
800 x 600	47.	75	+/+
1024 x 768	48.	60	-I-
1024×768	60.	75.	+/+
1152 x 864	67.500	75	+/+
1280 x 1024	64.	60.	+/+
1280 x 1024	80.	75.	+/+
1680 x 1050	65.290	60.	-/+
1920 x 1080	67.500	60	+/+	Recommend Mode
1920 x 1080	84.	75.	+/+

HDMI Timing (Video)

Factory support mode (Preset Mode)	Horizontal Frequency(kHz)	Vertical Frequency(Hz)	HDMI
480P	3130	60	0
576P	31.	50	0
720P	37.50	50	0
720P	45.00	60	0
1080P	56.	50	0
1080P	67.50	60	0 Recommend Mode

Beep Guide

Menu	Location
Quick Settings	1
Quick Settings – Brightness	11
Quick Settings – Brightness	111 Slider
Quick Settings – Contrast	12
Quick Settings – Contrast	121 Slider
Quick Settings – Volume	13
Quick Settings – Volume	131 Slider
Quick Settings – Auto Configuration(only Dsub)	14
Quick Settings – Auto Configuration(only Dsub) – No	141
Quick Settings – Auto Configuration(only Dsub) -Yes	142
Input	2
Input – Input list	21
Input – Input list – D-SUB	211
Input – Input List – HDMI	212
Input – Input List – Displayport	213
Input – Aspect Ratio	22
Input – Aspect Ratio – Full Wide	221
Input – Aspect Ratio – Original	222
Picture	3
Picture – Picture Mode	31
Picture – Picture Mode – Custom	311
Picture – Picture Mode – Reader	312
Picture – Picture Mode – Photo	313
Picture – Picture Mode – Cinema	314
Picture – Picture Mode – Color Weakness	315
Picture – Picture Mode – Game	316
Picture – Picture Adjust	32
Picture – Picture Adjust – Brightness	321
Picture – Picture Adjust – Brightness	3211Slider
Picture – Picture Adjust – Contrast	322
Picture – Picture Adjust – Contrast	3221 Slider
Picture – Picture Adjust – Sharpness	323
Picture – Picture Adjust – Sharpness	3231 Slider
Picture – Picture Adjust – SUPER RESOLUTION+	324
Picture – Picture Adjust – SUPER RESOLUTION+ – Off	3241
Picture – Picture Adjust – SUPER RESOLUTION+ – High	3242
Picture – Picture Adjust – SUPER RESOLUTION+ – Middle	3243
Picture – Picture Adjust – SUPER RESOLUTION+ – Low	3244
Picture – Picture Adjust – Black Level	325
Picture – Picture Adjust – Black level – High	3251
Picture – Picture Adjust – Black Level – Low	3252
Picture – Picture Adjust – DEC	326
Picture – Picture Adjust – DFC – On	3261
Picture – Picture Adjust – DFC – Off	3262
Picture – Game Adjust	33
Picture – Game Adjust – Response Time	331
Picture – Game Adjust – Response Time – Faster	3311
Picture – Game Adjust – Response Time – Fast	3312
Picture – Game Adjust – Response Time – Normal	3313
Picture – Game Adjust – Response Time – Off	3314
Picture – Game Adjust – FreeSync	332
Picture – Game Adjust – FreeSync – On	3321
Picture – Game Adjust – FreeSync – Off	3322
Picture-Game Adjust – Black Stabilizer	333
Picture – Game Adjust – Black Stabilizer	3331 Slider
Picture – Game Adjust – Crosshair	334
Picture – Game Adjust – Crosshair – Red Cross	3341
Picture-Game Adjust – Crosshair – Green Cross	3342
Picture – Game Adjust – Crosshair – Red Dot	3343
Picture-Game Adjust – Crosshair – Green Dot	3344
Picture – Game Adjust – Crosshair – Off	3345
Picture – Color Adjust	34
Picture – Color Adjust – Gamma	341
Picture – Color Adjust – Gamma – Mode 1	3411
Picture – Color Adjust – Gamma – Mode 2	3412
Picture – Color Adjust – Gamma – Mode 3	3413
Picture – Color Adjust – Gamma – Mode4	3414
Picture – Color Adjust – Color Temp	342
Picture – Color Adjust – Color Temp – Custom	3421
Picture-Color Adjust – Color Temp-Warm	3422
Picture-Color Adjust – Color Temp-Medium	3423
Picture – Color Adjust – Color Temp – Cool	3424
Picture – Color Adjust – Red	343
Picture – Color Adjust – Red	3431 Slider
Picture – Color Adjust – Green	344
Menu	Location
Picture – Color Adjust – Green	3441Slider
Picture – Color Adjust – Blue	345
Picture – Color Adjust – Blue	3 4 51 Slider
Picture – Configuration Adjust (Only D-sub)	35
Picture – Configuration Adjust (Only D-sub) – Horizontal	351
Picture – Configuration Adjust (Only D-sub) – Horizontal	3511Slider
Picture – Configuration Adjust (Only D-sub) – Vertical	352
Picture – Configuration Adjust (Only D-sub) – Vertical	3521Slider
Picture – Configuration Adjust (Only D-sub) – Clock	353
Picture – Configuration Adjust (Only D-sub) – Clock	3531Slider
Picture – Configuration Adjust (Only D-sub) – Phase	354
Picture – Configuration Adjust (Only D-sub) – Phase	3541Slider
Picture – Resolution(Only D-sub)	36
Picture – Resolution (Only D-sub) -1024*768	361
Picture – Resolution (Only D-sub) -1280*768	362
Picture – Resolution(Only D-sub) -1360*768	363
Picture – Resolution (Only D-sub) -1366*768	364
Picture – Resolution (Only D-sub) – Off	365
Picture – Resolution(Only D-sub) -1280*960	361
Picture – Resolution(Only D-sub) -1600*900	362
Picture – Resolution (Only D-sub) – Off	363
Picture – Resolution (Only D-sub) -1440*900	361
Picture – Resolution(Only D-sub) -1600*900	362
Picture – Resolution (Only D-sub) – Off	363
Picture – Picture Reset	37
Picture – Picture Reset – No	371
Picture – Picture Reset – Yes	372
General	4
General – Language	41
General – Language – English	411
General – Language – German	412
General – Language – French	413
General – Language – Spanish	414
General – Language – Italian	415
General – Language – Swedish	416
General – Language- Finnish	417
General – Language – Portuguese	418
General – Language – Portuguese (Brazil)	419
General – Language- Polish	4110
General – Language – Russian	4111
General – Language – Greek	4112
General – Language- Ukrainian	4113
General – Language – Chinese	4114
General – Language – Traditional Chinese	4115
General – Language – Japanese	4116
General – Language- Korean	4117
General – Language- Hindi	4118
General – Smart Energy Saving	42
General – Smart Energy Saving – High	421
General-Smart Energy Saving – Low	422
General – Smart Energy Saving – Off	423
General – Automatic Standby	43
General – Automatic Standby – 4H	431
General – Automatic Standby – 6H	432
General – Automatic Standby – 8H	433
General – Automatic Standby – Off	434
General – OSD Lock	44
General – OSD Lock – On	441
General – OSD Lock – Off	442
General – Information	45
General – Information	451
General – Reset	46
General – Reset – No	461
General – Reset – Yes	462

Supplier’s Declaration of Conformity

Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
E-mail

The model and a serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.

Model———————–
Serial No.——————-

Download

LG 24MP450 23.8 Inch Full HD LED IPS Monitor Owner’s Manual

Was this manual helpful?