LG 32SM5J 32 Inch Digital Monitor Signage Owner’s Manual
LG 32SM5J 32 Inch Digital Monitor Signage
BASIC
NOTE
- The accessories provided with your product may vary depending on the model or region.
- Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions. - SuperSign Software & Manual
- Visit http://partner.lge.com to download the latest SuperSign software and manual.
Checking the Accessories
Checking the Optional Accessories
In order to improve product performance, optional accessories are subject to change without prior notice. The illustrations in this manual may differ from the actual product and its accessories. Refer to the product manual for the components of the optional accessories.
Learning the Buttons
The illustrations may differ depending on the model.
- INPUT : Changes the input signal.
- MENU : Opens the main menu or saves the input selection and exits the menu.
- AUTO /SET: Shows the signal and mode information currently set and allows the user to select a menu.
GETTING READY
Connecting the IR Sensors
Connecting the cable to the product allows it to receive signals from the remote control.Rotate the IR sensor according to horizontal or vertical use.
- The illustrations may differ depending on the model.
Default Mount – Horizontal Use
Vertical Use
Mounting and Removing the LG Logo Bracket
- Applies only to some models.
- The illustrations may differ depending on the model.
Removing the LG Logo Bracket
Place a clean cloth on the floor, and remove one screw from the LG logo bracket on the lower back of the monitor with a screwdriver.
Mounting the LG Logo Bracket on the Right
Screw the LG logo bracket into the hole on the right.
Assembling the Memory Cover
After attaching the USB memory, use a screw to assemble the cover, as shown in the illustration, to prevent theft.
Kensington Lock Device
(This feature applies only to some models.)
The Kensington lock device connector is located on the back of the monitor. For more information on installation and
use, refer to the user manual provided with the locking device. Connect the Kensington security system cable between the monitor and a table.
NOTE
- The Kensington lock device is an optional specification.
- This is a general illustration of installation and may look different from the product held by the customer.
CHECKING BEFORE INSTALLATION
We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.
Tilt Angle
Installation Location
We are not responsible for product damage caused by failure to follow the guide.
Indoor
Installing on a Wall
A : 40 mm or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Installing on a Recessed Wall
A : 40 mm or more
B : 50 mm or more
C : 70 mm or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Outdoor
Outdoor Enclosed
Wall Mount Holder
- To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
- Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
- The VESA dimensions of the wall mount by model are as follows.
| Model | VESA
Dimensions
(A x B) (mm) |
Standard
Dimensions |
Length (Maximum) (mm) | Quantity |
| 32SM5J | 200 x 200 | M6 | 21.3 | 4 |
CAUTION
- Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
- If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
- Damage to the monitor by tightening the screws too tightly may void your warranty.
- Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse
of inappropriate components is not covered by the warranty of this product.
NOTE
- Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
- For more information on installation, please refer to the user manual for the wall mount.
PRECAUTIONS FOR USE
Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Afterimage
- After-image appears when the product is turned off.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-
saver function. - Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause
an afterimage. This is normal due to the display characteristics of this product.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-
- When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between
the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time
and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called
an afterimage. - Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed
for a long time. The following are operational recommendations for reducing the occurrence of afterimages when
using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better
for preventing afterimages. - Recommended Usage Condition
- Change the background colour and text colour at equal intervals.
- Afterimages occur less when the colours to be changed are complementary to one another.
- Switch the screen at equal time intervals.
- Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.
- Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.
- Afterimages occur less when the colours to be changed are complementary to one another.
PRODUCT SPECIFICATIONS
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
| Input/Output P orts |
HDMI1, HDMI2, HDMI3, IR & LIGHT SENSOR, AUDIO OUT, LAN IN, RS-232 IN/OUT, USB 2.0 IN | |
| R esolution |
R ecommended R esolution | 1920 x 1080 @ 60 Hz (HDMI1, HDMI2, HDMI3) |
| Max Resolution | ||
| P ower V oltage | AC 100-240 V ~ 50/60 Hz 0.8 A | |
|
Environmental Conditions |
Operating
T
emperature
Operating Humidity |
0 °C to 40 °C 10 % to 80 % (Condition for preventing condensation) |
| Storage
T
emperature
Storage Humidity |
-20 °C to 60°C 5 % to 85 % (Condition for preventing condensation) * Product box packaging storage conditions | |
| Audio | Input Sensitivity | 0.7 Vrms |
| P
ower
Consumption |
On Mode | 55 W (Typ.) |
| Sleep Mode / Standby Mode | ≤ 0.5 W | |
| Model Name | Size (Width x Height x Thickness) (mm) | W eight (kg) | |
| 32SM5J |
Head | 729.4 x 428.9 x 55.5 | 5.7 |
| Head + Stand | 729.4 x 481 x 154.2 | 6.5 | |
HDMI (PC) Support Mode
| R esolution |
Horizontal
F
r
equency
(kHz) |
V ertical F r equency (Hz) |
N o t e |
| 800 x 600 | 37.879 | 60.317 | |
| 1024 x 768 | 48.363 | 60 | |
| 1280 x 720 | 44.772 | 59.855 | |
| 1280 x 1024 | 63.981 | 60.02 | |
| 1680 x 1050 | 65.29 | 59.954 | |
| 1920 x 1080 | 67.5 | 60 |
HDMI (DTV) Support Mode
| R esolution |
Horizontal
F
r
equency
(kHz) |
V ertical F r equency (Hz) |
N o t e |
| 480/60p | 31.5 | 60 | |
| 576/50p | 31.25 | 50 | |
| 720/50p | 37.5 | 50 | |
| 720/60p | 45 | 60 | |
| 1080/50i | 28.1 | 50 | |
| 1080/60i | 33.75 | 60 | |
| 1080/50p | 56.25 | 50 | |
| 1080/60p | 67.432 | 59.94 | |
| 1080/60p | 67.5 | 60 |
| Wireless module (LGSBWAC92) Specifications | |
| Wireless LAN (IEEE 802.11a/b/g/n/ac) | |
| F r equency r ange (MHz) | Output power (Max.) (dBm) |
| 2400 to 2483.5 5150 to 5725 5725 to 5850 |
18
18 12 |
| Bluet ooth | |
| F r equency r ange (MHz) | Output power (Max.) (dBm) |
| 2400 to 2483.5 | 8 |
| • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
• F or consideration o f the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. | |
LICENCE
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
You can find more information about the LG Digital Signage (Monitor Signage) in the web manuals (Software User
Guide / Installation Manual).For more information, visit the LG website at http://partner.lge.com.
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.This product qualifies for ENERGY STAR®. Changing the factory default configuration and settings or enabling certain optional features and functionalities may increase energy consumption beyond the limits required for ENERGY STAR® certification. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.