Haier HD90-A636-F Front Load Heat Tumble Dryers User Manual

Haier HD90-A636-F Front Load Heat Tumble Dryers

DEAR CUSTOMER

Thank you for your purchase of a Haier product. Please read the manual and safety instructions carefully and keep them for future reference and pass them on to any future owner.

SCOPE OF DELIVERY

Please check, if the accessories and literature is in accordance with this list.

  1. User manual
  2. Rack
  3. Drainpipe

INTENDED USE

This heat pump tumble dryer is designed for household use only. It should be used to dry items which have been washed in a water solution and are marked on the manufacturer’s care label as being suitable for tumble drying. It is not intended for commercial or outdoor use. Haier cannot be held liable for damage resulting from incorrect or improper use or operation. This tumble dryer conforms to current safety requirements.

SAFETY INSTRUCTIONS

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Children under 3 years of age must be kept away from the tumble dryer unless they are constantly supervised.
  • The tumble dryer is not a toy! To prevent the risk of injury, do not allow children to play with it or near it, or to play with the controls.
  • Before setting up the tumble dryer, check it for any externally visible damage.
  • Do not install or use a damaged tumble dryer.
  • Before connecting the tumble dryer, ensure that the connection data match the mains electricity supply. If in any doubt, consult a qualified electrician.
  • The electrical safety of this tumble dryer can only be guaranteed when correctly earthed.
  • Do not connect the tumble dryer to the mains electricity supply by an extension lead.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person.
  • Faulty components must be replaced by original spare parts.
  • The tumble dryer must be isolated from the mains supply in the event of a fault and during cleaning and maintenance.
  • Do not install the tumble dryer in a room where there is a risk of frost occurring. The ambient temperature should be between 5 °C and 35 °C.
  • Do not install the tumble dryer behind a lockable door, a sliding door or a door with hinges on the opposite side of the tumble dryer door as this limits the full opening of the tumble dryer door.
  • Always keep the area around the tumble dryer free of dust and lint. Also make sure that the area is dry and well ventilated.
  • The tumble dryer must not be used in a non-stationary location (e.g. a ship).
  • Do not make any alterations to the tumble dryer, unless authorised to do so by Haier.
  • In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the tumble dryer and its surroundings in a clean condition at all times.
  • Do not dry unwashed items in the tumble dryer.
  • Do not load more than Nominal load.
  • Items which contain residues of inflammable substances such as cooking oil, acetone, alcohol, benzine, petrol, kerosene, spot removers, turpentine, waxes, wax removers or other chemicals should not be dried in the tumble dryer.
  • If it is unavoidable to dry items that contain vegetable oil, cooking oil, hair care or cosmetical products, they should be washed using additional detergent and select a high temperature. If in doubt, wash the items several times.
  • Items which contain a large proportion of rubber, foam rubber (latex foam) or rubber like materials such as shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling should not be dried in the tumble dryer.
  • Items which have been cleaned using chemicals such as professional drycleaning agents, should not be dried in the tumble dryer.
  • Do not dry damaged items which contain padding or fillings (e.g. pillows, jackets), as the filling can get out with the risk of igniting in the dryer.
  • Remove all items such as lighters and matches from pockets.
  • The end of a dryer cycle runs without heat (cool down cycle) to ensure that the items do not get damaged and are at a handleable temperature.
  • Warning: Do not switch the tumble dryer off before the drying cycle is finished. Afterwards, the laundry must be hung up or spread out to cool it down.
  • Fabric softeners and similar products must be used as specified by the manufacturer’s packaging.
  • The dryer must not be used without the lint filters in place or with damaged filters.
  • The lint filters must be cleaned regularly.
  • Close the door once the laundry is removed to prevent children, animals and objects getting into the drum.
  • Do not sit or lean on the door, as this can cause the tumble dryer to tilt.
  • Condensed water is not drinking water. It can cause health problems in both people and animals.

Notice

This appliance contains the fluorinated greenhouse gas HFC-134a (GWP:1430). This gas is hermetically sealed.

USING THE DRYER RACK

DRYER RACK
The dryer rack is designed for use with items which are not recommended for tumble drying such as trainers, sneakers, sweaters or delicate lingerie.

TO USE THE DRYER RACK

  1. Open the dryer door.
  2. Check that the drum is empty.
  3. Put the dryer rack into the drum.
  4. Make sure the catches are inserted in the hole of the lint filter and locked in the hook of basket.

PLEASE NOTE

  • Do not use this dryer rack when there are other clothes in the dryer.
  • During drying, please make sure the items are placed on the rack with no risk of entangling the baffles while the drum is rotating.
  • Maximum weight of wet items: 1.5 kg.

FRONT VIEW

The pictures may differ from the appliance you have purchased due to technical improvements.

  1. Water tank
  2. Tumble dryer door
  3. Service door
  4. Control panel
    REARVIEW
  5. Power supply cord
  6. Backplate
  7. Drainage outlet
  8. Adjustable feet

CONTROL PANEL

 

AUTO load detection system

  

When the programme starts, after a few minutes the display will show AUto. This means the automatic load detection is in progress. Sensors are detecting and estimating the selected programme time to finish. Depending on the programme selected, load quantity, humidity and ambient temperature, the AUTO load detection phase can last a few minutes for small load, or up to hour for the maximum load or large items, before displaying the approximate programme time remaining to finish the programme.

5 Program knob Select one of the 16 programs using the knob. The indictor of the respective program lights up. See Program Modes section of the manual for further information.
6 CD Power button Press Power button to switch on/off the tumble dryer.
7 Temp button Press the button to set the drying temperature for some programs.

++       High temperature.

<n!.l+      Middle temperature. Low temperature.

Cool air.

8 Dry level button Press the button to set the final moisture content
of the laundry at the end of cycle.
:¢: Extra dry.
2::,. Ready to store.
Q Ready to iron.
9 Delay button Delay function for delay start, press the button to set time (in 1 intervals up to 19 hours).

The appliance shoule be finished in, afterwards press ►II to start the delayed operation.

Note: This function should be set after you have finished all the options, otherwise when you turn the knob or press the button, the function will be delected automatically.
 

1O Time± button

  

Turn the knob to select the Timer program, then the light of Time± is on. Press the button  to add or substract the time.The default time is 30min, the shortest time is 10 min and the longest time is 150min.

 

11 @emo

 Press the button for 2 sec to memory the cycle you want, at the same time the indicator light will

be on. The next time, when you want to use the stored cycle you just only press the @ emo

button. The light is on and the stored cycle is activated.

Note: The ” Delay function ” can not be memoried.

12►II Start/Pause button Press Start/Pause to Start a drying cycle. Press button again to pause the drying cycle – indicator light is flashing. Press button again to continue.
Signal                              You can choose signal as you need. To active the signal function after switching on the dryer, press Timer± and @ emo for about 3 seconds

until the beep sounds.To deactivate press both buttons for 3 seconds again until the beep sounds

PROGRAM MODES

Zz Extra Dry  

Extra dry

  

Heavy cotton

  

9 kg

Ow O    Ready to

I- z

IQ– . .–. J                    Store* )

 Ready to store Cotton, coats 9 kg
(.) Ready to Iron Damp Ordinary cotton 9 kg
en

(.)

i w =

:::c:

zI-

>en–

 Extra Dry Extra dry Heavy synthetic 4.5 kg
Ready to Store Ready to store Ordinary synthetic 4.5 kg
Ready to Iron Damp Ordinary synthetic 4.5 kg
 

 

 

 

 

…J

<(

u w

e a n ..

 Shirt  

Ready to store

 Shirts 3 kg
Towel Extra dry Towels 4 kg
Jeans Extra dry Jeans 3 kg
Timer Heavy fabrics, need further drying 4 kg
Refresh Microfiber fabrics 3 kg
Mix Ready to store Heavy fabrics, need further drying 4 kg
Bedding Ready to store Sheets 4 kg
Sport Ready to store Sportswear 3 kg
Underwear Ready to store Underwear 3 kg
Baby Garment Ready to store Baby clothing 4 kg

PREPARING THE DRYER

  1. Connect the tumble dryer to a power socket.
  2. Make sure the water tank is empty and properly installed.
  3. Make sure that the lint filter is clean and properly installed.
  4. Make sure that the condenser filter is clean and properly installed.

PREPARING THE LAUNDRY

  1. 1 Sort clothes according to fabric (cotton, synthetics, wool etc.). Only dry January that has been spun.
  2. 2 Empty pockets of all sharp or flammable objects such as keys, lighters, and matches. Remove harder decorative objects such as brooches.

Follow the instructions on the laundry label and dry only machine-dryable garments.

  • Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as socks, bras etc. in a wash bag.
  • Unfold large pieces of fabric such as bed sheets, table cloth etc.

LOADING THE DRYER

  1. Place the laundry evenly in the drum making sure not to overload the dryer.
  2. Switch on the tumble dryer by pressing the Power button.

Fabric softeners or similar products should be used as specified in the manufacturer’s instructions.

CARE CHART

LOAD REFERENCE

SET PROGRAM & START

  1. Turn the program knob to select the desired program.
  2. Set functions such as Temperature,  Dry level, and Delay. Afterward press the Start/Pause button to start the dry cycle.

ENVIRONMENTAL TIPS 

  • Spin the laundry as dry as possible before putting it into the tumble dryer.
  • Avoid overloading the tumble dryer.
  • Shake the laundry loose before putting it into the tumble dryer.
  • Choose a proper drying program. Make sure the laundry is not dried longer than needed.
  • Make sure to use the tumble dryer with cleaned filters.

END OF DRY CYCLE

The tumble dryer stops operation automatically when a dry cycle is complete. The display shows END. Open the tumble dryer door and remove the laundry. If the laundry is not removed the anti-crease program starts automatically.

  1. Switch off the tumble dryer by pressing the Power button.
  2. Unplug the tumble dryer from the power socket.
  3. Empty the water tank after each dry cycle.
  4. Clean the lint filter after each dry cycle.
  5. Clean the condenser filter after each dry cycle.

EMPTY THE WATER TANK

During operation, steam condenses to water which is collected in the water tank. Empty the water tank after each drying cycle.

  1. Pull out the water tank from its housing.
  2. Empty the water tank.
  3. Reinstall the water tank to the tumble dryer.

Note: Do not use the water for any kind of drinking or food processing.

LINT FILTER CLEANING

Clean the lint filter after each dry cycle.

  1. Remove the lint filter from the drum.
  2. Open up the lint filter.
  3. Clean the lint filter form any lint residuals.
  4. Reinstall the cleaned lint filter in the tumble dryer.

Note: if the lint filter is very dirty, it can be cleaned under running water. Let it dry thoroughly before use.

CONDENSER FILTER CLEANING

Clean the condenser filter after each dry cycle.

  1. Open the Service door.
  2. Open the four levers of the condenser filter.
  3. Pull out the condenser filter from its housing.
  4. Remove the rear filter screen.
  5. Clean the condenser filter form any residuals.
  6. Reinstall the rear

To reinstall the condenser filter, follow the above steps 3 to 1 in reverse order.
Note: if the condenser filter is very dirty, it can be cleaned under running water. Let it dry thoroughly before use.

HEAT PUMP TECHNOLOGY

The condensation dryer with heat exchanger is outstanding in terms of efficient energy consumption.
These are guide values determined under standard conditions. The values may differ from those given, depending on overvoltage and undervoltage, the type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and the size of the load.

CONSUMPTION TABLE

z z w

–:::i

z

0

I-

I-

0 u

  

Extra Dry

 1000

(approx. 60 %)

  

2.34kwh

  

4:40h

 

Ready to Store             1000                          1.98kwh                      4:29h (approx. 60 %)

                                                                                                                                               

 

Ready to Iron               1000                          1.62kwh                      3:18h (approx. 60 %)

CLEANING & CARE

TUMBLE DRYER
Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do not use any organic solvent or corrosive agent to avoid damage to the device.
DRUM
After some operation time, fabric care agents or calcium contained in the water can form an almost invisible film on the inside of the drum. Use a damp cloth and some detergent to remove it. Do not use any organic solvent or corrosive agent to avoid damage to the device.
EVAPORATOR
If the evaporator behind the condenser filter is dirty, it can be cleaned by use of a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.

ERROR CODES

F2 Drain pump error. Contact the customer service.
F31, F32 The condenser thermal sensor is open-circuited or short-circuited. Contact the customer service.
F4 Temperature of the laundry in the drum does not change. Contact the customer service.
F5 Communication failure between PCB and display. Contact the customer service.
E6 The filters is clogged. Clean both filters.
 

Lo

 Temperature is too low. Use the dryer when air temperature is higher than 5 °C.

TROUBLESHOOTING

Before contacting the customer service, please check the following circumstances:

Tumble dryer fails to operate. –   Poor connection to the power supply.

–   Power failure.

–   No drying program is set.

–   Device has not been switched on.

–   The water tank is full.

–   The door is not closed properly.

 Check connection to the power supply.
Check the power supply.
Set a drying program.
Switch the device on.
Empty the water tank.
Close the door properly.
Tumble dryer – The laundry has reached Check if the program setting is
fails to operate the condition defined by appropriate.
and the display the program.
shows END. – There is no laundry in the Check if there is laundry in the
drum. drum.
Drying time is – The program setting is not Make sure the program is set
too long and correct. correctly.
the results are – The filter is clogged. Clean the filter screen.
not satisfac- – The evaporator is blocked. Clean the evaporator.
tory. – The tumble dryer is Reduce the amount of laundry.
overloaded.
– The laundry is too wet. Spin the laundry properly
before drying.
– The vent duct is blocked. Check the vent duct and
unblock it.
Remaining time  The remaining time will be on the display        adjusted continuously based stops or skips. upon the following factors:

–   Type of laundy.

–   Loaded amount.

–   Moisture degree of the laundry.

-Ambient temperature.

 The automatic adjustment is a normal operation.

ELECTRIC CIRCUIT DIAGRAM

  • Door switch
  • Humidity sensor
  • Water level switch
  • Temperature sensor
  • Temperature sensor
  • Lamp
  • Drainage pump
  • Fan motor
  • Heat pump
  • Capacitor 1 Ouf
  • Motor
  • Capacitor 8uf

PRODUCT FICHE

Product fiche (according EU 392/2012)

Trade mark Haier
Mode No. HD90-A636-F / HD90-A636
Rated capacity (kg) 9
Type Condensing
Energy efficiency class A++
Energy consumption per year (kWh / annum) 1) 236
Automatic or non-automatic Automatic
Energy consumption (full load)( kWh/cycle) 1.98
Energy consumption (partial load)( kWh/cycle) 1.17
Power in off-mode (W) 0.1
Power in left-on mode (W) 1.19
Duration of the “left-on mode” (min) 2) 40
Standard cotton programme 3) Cotton0/         Ready to store
Weighted programme time (full and partial load)(min) 208
Programme time (full load)(min) 269
Programme time (partial load)(min) 162
Condensation efficiency class 4) B
Weighted condensation efficiency(%) 80
Condensation efficiency (full load)(%) 80
Condensation efficiency (partial load)(%) 80
Sound power lever (dB) 67
Built-in or freestanding Freestanding
1) Based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes.Actual energy consumption per cycle will

depend on how the appliance is used.

2) In case there is a power management system.
3) Standard cotton programme used at full and partial load is the standard programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that is the most efficient programme in terms of

energy consumption for cotton.

4) Class G is the least efficient and Class A is the most efficient.

CUSTOMER SERVICE

If you have a problem with your appliance, first see the Troubleshooting section of the manual. If you cannot find a solution there, please contact your local dealer or try one of the following numbers. Before contacting customer service, ensure that you have the following data available. The data can be found on the rating plate:

Haier United Kingdom (UK)
Postal address: Haier Appliances UK Co.Ltd. One Crown Square Church Street
East Woking, Surrey, GU21 6HR UK For other countries please refer to the service and support area of
www.haier.com.