Bosch BGB6PET2 ProAnimal Vacuum Cleaner Instruction Manual

BOSCH BGB6PET2 ProAnimal Vacuum Cleaner

Overview

Please keep this user manual for future reference. When giving the vacuum cleaner to a third party, please also pass on this instruction manual.

Application area

The Turbo brush vacuums and brushes carpets in conjunction with the vacuum cleaner. It removes dust, fluff, thread and hairs particularly thoroughly. It achieves a clearly visible loosening of compacted carpet pile. The Turbo brush can also be used on hard floors.

Intended use

This Turbo brush is intended for domestic use only, not for commercial use. The Turbo brush must only be used in accordance with the specifications in this instruction manual. You must therefore note the following points.

  • Only use original replacement parts.

The Turbo Brush is not suitable for:

  •  Vacuuming persons or animals.
  •  Vacuuming up:
    •  Hazardous, sharp-edged, hot or burning substances.
    •  Damp substances or liquids.
    •  Highly flammable or explosive substances and gases.

Safety information

The Turbo brush complies with the generally accepted rules of good engineering practice and the relevant safety regulations. We confirm that it complies with the European directives.

  •  The Turbo brush must only be used when the brush roller is fitted.
  •  Do not reach into the moving brush roller.
  •  When the brush roller is turning, do not run over the power cable.
  •  When the brush roller is rotating, keep the Turbo brush moving on the carpet (damage to the floor).
  • Wool velour carpets, especially those with a loose pile, should only be cleaned with the Turbo brush at widely spaced time intervals.
    Please note:
    Do not move the Turbo brush close to long hair, scarves, ties or similar.
  • The appliance may be used by children over the age of eight years old, by persons with reduced physical, sensory or mental capacity, or by persons with a lack of experience and/or knowledge provided that they are supervised or have been instructed on how to use the appliance safely and that they have understood the potential dangers of using the appliance.
  • Do not let children play with the appliance.
  • Cleaning and user maintenance must not be performed by children unless they are supervised.

Disposal information

Packaging
The packaging protects the Turbo brush from damage during transportation. It is made from environmentally friendly materials and is therefore recyclable. Dispose of packaging that is no longer required at an appropriate recycling point.

Old appliances
Old appliances often still contain valuable materials. Therefore, when your Turbo brush has reached the end of its service life, please take it to your retailer or recycling center for recycling. Please ask your dealer or your local council about current disposal methods.

Description of the appliance

  1.  Nozzle holder with accessory connection*
  2.  Nozzle holder without accessory connection*
  3.  Carpet button*
  4.  SelfClean button
  5.  Inspection window with turbine system
  6.  Brush roller release button
  7.  Brush roller guide rod
  8.  Brush roller

Starting up for the first time

Nozzle without accessory connection:
Place the Turbo brush on the suction pipe. To release the connection, turn the pipe slightly and pull it out of the Turbo brush holder.

Nozzle with accessory connection:
Slide the telescopic pipe until it clicks into place in the holder for the Turbo brush. To release the connection, push the release collar and pull out the telescopic pipe.

Vacuum brushing

Please note:
Only vacuum brush at full suction power, i.e. max. power setting on the vacuum cleaner.

Cleaning carpets/carpeted floors
When cleaning carpets, the brush roller starts automatically three seconds after the vacuum cleaner is switched on. When cleaning carpets, the turbine system works without any braking. This creates the maximum suction power for the nozzle.

Cleaning hard floors
The turbine system detects the type of flooring. When changing from carpeted floors to hard floor, the tur-bine system starts to brake down the rotation speed and therefore reduces the noise level. If you change flooring from hard floor to carpet the turbine system doesn’t brake anymore and have again the maximum suction power.

Fig 2* Carpet button* 

  • Press the Carpet button when vacuuming long-pile carpets.
  • This reduce a force of pushing nozzle and speed up brush roller.
    Please note:
    The Carpet button can be pressed when cleaning all types of flooring.

Fig. 3 SelfClean button

  • Press and hold the SeflClean button when nozzle is on the hard floor to order to use the maximum airflow and the minimum resistance for the brush roller.
  • The best results of cleaning brush roller are with using function 3 times per 5 seconds. If it necessary please hold the button longer
    Please note:
    We recommend using the SelfClean function after using the Turbo brush.

Maintenance

Before carrying out any maintenance work, switch off the vacuum cleaner and pull out the mains plug. Remove the Turbo brush from the suction/telescopic pipe.
Fig. 4

  • Use the release button to release the brush roller and pull it sideways out of the Turbo brush.

FIG.5

  •  Remove the dirt.
  •  When hairs gets stuck between the brush roller re-lease button and the brush roller you can separate them by pulling on the release button with some force. Then you can clean the axis and put the parts back together.

Fig. 6

Push the brush roller in sideways along the guide rod and into the Turbo brush, and lock it in place using the release button.
Caution:
The Turbo brush must only be used with the brush roller fitted.