HP HSC-L03WC Wireless Charger Module User Guide
Safety & Regulatory Guide for [HSC-L03WC Wireless Charger Module].
Product Name： Wireless Charger Module
Brand Name： hp
Type Number： HSC-L03WC
Input：12Vdc 2A
Output:15W Max.
It is a 15W WPC wireless charger module for charging a single phone or phablet.
Wireless charger is built into the base of select HP AIO or PC base unit All-in-One
computers. Place any Qi-enabled device on the base for charging.
- Place the device on the base of the computer.
- Position the device wireless charging coil directly on top of the square icon the on the base
note: The label does not affect the wireless charging function.
Troubleshooting charging issues
If the wireless charging feature does not work as expected, verify the following:
- Make sure that your mobile device is capable of wireless charging. See the product specifications of your mobile device.
- Make sure that your mobile device is placed correctly on the base.
- This booklet provides important safety, regulatory information that you should read before you start using your [HCS-L03WC Wireless Charger]
- To avoid damaging your device, accessories, or any connected devices, and to reduce the risk of personal injury, discomfort, property damage, or other potential hazards, follow these precautions below :
- Handle your [HSC-L03WC Wireless Charger Module] with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture your device. Using a
the damaged device may cause overheating or injury. Don’t expose your [HCS-L03WC Wireless Charger Module] to liquids, which can cause a short circuit and overheat.
The [HSC-L03WC Wireless Charger Module] is designed to work best in ambient temperatures between 0 and 40° C. - Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements.
- Hereby, HP Inc. declares that the radio equipment type HSC-L03WC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: http://www.hp.com/go/orderdocuments - Hereby, HP Inc. declares that the radio equipment type HSC-L03WC is in compliance with RER 2017 (SI 2017/1206). The full text of the UK declaration of conformity is
available at the following internet address: http://www.hp.com/go/orderdocuments - In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU,UK:
| WPC | Frequency range | Output power |
| 120-130kHz | < 0 dBuA/ |
- RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on NonIonizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
EMC Compliance
Important: This device and power adapter have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
Changes or modifications to this product not authorized by hp could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.
Regulatory Information: United States
FCC REGULATORY COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by hp could void your authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1 These devices may not cause harmful interference.
2 These devices must accept any interference received, including interference that may cause undesired operation.
Maintain a distance of 20 cm (8 inches) from your body to be consistent with how the device is tested for compliance with RF exposure requirements.
FCC ID: 2APXN-HSCL03WC
EMC COMPLIANCE STATEMENT
Important: This device [and its power adapter] have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
RADIO FREQUENCY EXPOSURE
This device meets the U.S. Federal Communications Commission’s (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC’s emission limits for exposure to radiofrequency (RF) energy. To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.
Innovation, Science and Economic Development (ISED) Canada Regulatory Compliance
IC: 24654-HSCL03WC
INDUSTRY CANADA, CLASS B
This Class B digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure
The output power of the radio technology used in the Device is below the radio frequency exposure limits set by ISED for an uncontrolled environment. Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements.
NCC
To access the latest user guide, go to http://www.hp.com/support, and select your country.
Select Drivers & Downloads, and then follow the on-screen instructions.
*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your tablet and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:
- North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA
- Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy
- Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address.
IMPORTANT: Do NOT return your HP product to the addresses above.
For U.S. support, go to http://www.hp.com/go/ contactHP.
For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.