Sharp HP-BC50 Wireless Bone Conduction Headphones User Manual

SHARP HP-BC50 Wireless Bone Conduction Headphones

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

Accessory

The following accessory is included.

• Charging cable x 2 (92LBC50QCNW01A)
  

Special Notes
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other trademarks and trade names are those of their respective owners. Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like).An independent license for such use is required. For details, please visit http://mp3licensing.com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

FCC Notice
Supplier’s Declaration Of Conformity
SHARP WIRELESS BONE CONDUCTION HEADPHONES, MODEL HP-BC50 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:
MIZARI ENTERPRISES, INC.
5455 WILSHIRE BOULEVARD, SUITE 1410, LOS ANGELES, CA 90036 TEL: 1-800-BE-SHARP

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the unit. Please retain this information.

• Model number
• Serial number
• Date of purchase
• Place of purchase

Getting Started

1. Radio frequency exposure
   Wireless Bone Conduction Headphones is a radio transmitter and receiver. When in operation it communicates with a Bluetooth® equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.48 GHz. This product is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when using compatible mobile phone.
2. Battery information
   • A rechargeable battery has a long service life if treated properly.
   •  A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above 50°C (122°F) or below -10°C (14°F).
   •  For maximum battery capacity, use the battery at room temperature.
   •  If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between 5°C (41°F) and 40°C (104°F).
   • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3. Removal of waste batteries and accumulators
   (Product with embedded battery ONLY)
   • In case this product contains a battery incorporated within the product which cannot be readily removed by end users, SHARP recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact authorized independent service providers for advice.

CAUTION:
Internal lithium battery in the unit should not be replaced by end users due to danger of explosion if battery is incorrectly replaced and must be replaced with the exact type battery by authorized service providers. Recycling lithium-ion batteries Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit
CAUTION:
Internal lithium battery in the unit should not be replaced by end users due to danger of explosion if battery is incorrectly replaced and must be replaced with the exact type battery by authorized service providers.

Recycling lithium-ion batteries
Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Avoiding hearing damage
If volume on the headphones is too high, permanent hearing loss may occur. Please set the volume to a safe level. You can become habitual to hear at high volume that may sound normal but can damage your ears. If you experience ringing in your ears or muffled speech, stop listening and have your ears checked by the specialist doctor. The louder the volume, the more quickly the hearing can be damaged.
Hearing experts suggest how to protect your hearing

• Limit the amount of time you use the headphones at high volume.
• Avoid the habit of increasing the volume so that you do not hear the loud noises around you.
• Turn the volume down if you cannot hear people speaking around you. For setting the maximum volume limit of the connection device, refer to the instruction manual supplied with the connection device. Class B equipment (home-use broadcasting communication equipment): This equipment is intended for home-use (Class B) electromagnetic compatibility equipment and can be used in all areas.

 

• High sound pressure.
• Hearing damage risk.
• Do not listen at high volume levels for long periods.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Precautions

The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. Excessive sound pressure from headphones can cause hearing loss. Adjust the volume to an appropriate level when using the unit.

• Do not cover the product with items, such as news papers, tablecloths, curtains, etc. while charging.
•  Keep the unit away from strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
• Do not expose the unit to temperatures higher than 40°C (104°F) or to extremely low temperatures.
• Do not remove the outer cover. Refer internal service to your local SHARP service facility.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• This unit should only be used within the range of 0°C – 40°C (32°F – 104°F).
•  SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorized service center.
• This product contains magnetic material. Consult your physician or whether this might affect your implantable medical device.
  Do not make unauthorized alterations to this product.
• Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
• The product rating is located at the inner side of the product.
  
• MODEL: HP-BC50
  WIRELESS BONE CONDUCTION HEADPHONES INPUT: 5V 500mA FCC ID: 2AB3N-HPBC50 CAPACITY: 3.7V 180mAh MADE IN CHINA

CAUTION: Risk of explosion if the battery is replaced by an incorrect type

• High or low extreme temperatures that a battery can be subjected to during use, storage or transportation; and
• Low air pressure at high altitude.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

OVERVIEW

Thank you for choosing our product. Our HP-BC50 WIRELESS BONE CONDUCTION HEADPHONES are designed with fashionable looks, powerful features and high compatibility, providing you with hands-free convenience in making calls and listening to music. Best choice for office using, traveling and driving.

Bluetooth Wireless Technology

With this technology, you can connect the unit to its compatible Bluetooth devices without using cables. The Bluetooth wireless connection allows you to use a cell phone without holding it to your ear, but the maximum distance between both devices cannot exceed 10 meters (about 30 feet). The Bluetooth wireless connection may be interfered by obstacles (such as walls) or other electronic devices nearby. In some areas, the use of Bluetooth wireless technology may be subjected to some constraints. Please consult your local authority or service provider for details.

Getting Started
Fully charge the unit before using. For details, refer “Charging operation” on page 18. Meanwhile, choose a smartphone or other Bluetooth device that is compatible with this product.

Note :

• Keep the unit away from your credit cards or other magnetic storage media; otherwise, the stored information may be lost due to demagnetization.

Product features and functions

• Integrated Bluetooth headphones to meet various needs such as music listening and phone answering.
• Stereo sound effect to enjoy perfect
• Small and light, for comfortable and stable
• Two usage modes and multiple application scenarios for
• Built in internal storage of 2GB for music storage and

Notes :

• DO NOT wear the headphones when sleeping, otherwise it may be damaged or cause injuries to you.
• When driving, you are advised to use the Bluetooth connected headphones to ensure your driving safety. It is dangerous to directly use smartphones when
• Keep the headphones away from kids. Small components of the headphones may cause suffocation or other injuries to kids

Controls and indicators

1.  LED indicator
2. Magnetic charge terminal
3. Right button – Power on/off, Play, Pause, Next track, Volume Up, Function
4. Microphone
5. Left button – Previous track, Volume Down, Voice Assistant, Answer/Reject

General Control

• Power on
  When the unit is off, press and hold the RIGHT button for 3 seconds. The blue indicator will light up for 1 second. “Power on” voice prompt will be heard.
• Power off
  When the unit is on, press and hold the RIGHT button for more than 5 seconds. The red indicator will light up for 1 second and then the unit will be turned off. “Power off” voice prompt will be heard.
• Auto power off
  This unit will automatically power off if it is not paired with a source device after 5 minutes. The red indicator will light up for 1 second and then the unit will be turned off. “Power off” voice prompt will be heard.
• Volume control
  In music and call mode,
  • Volume Up :
    Press the RIGHT button once.
  • Volume Down :
    Press the LEFT button once.
• Wearing Instructions
  Hang the unit behind the neck and attach the speakers to the cheekbones in front of the ears.

Bluetooth Connection

Bluetooth Pairing

Notes:

• The operation range between this unit and a Bluetooth device is approximately 10 meters (without any object between the Bluetooth device and the unit).
• Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operation
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
• Bluetooth pairing from your device to this unit can be done during stand by and power on mode. However, Bluetooth playback from the source device is applicable at Bluetooth function

1. Press and hold the RIGHT button for about 3 seconds to power on and it will auto reconnect to the Bluetooth enabled device that was last If there is no paired record, it will automatically enter pairing mode after power on.
2. Turn on your Bluetooth device and search for “HP-BC50 SHARP”.
3. Begin playing music from the connected Bluetooth source

To disconnect the Bluetooth function, you can:

• Disable the Bluetooth function on your device. The device is successfully disconnected from the unit when the blue and red indicator blinks

INTERNAL MEMORY

Playing Music From the Internal Memory

Notes:

• The default mode when the unit is turned on for the first time is Bluetooth
• The Bluetooth connection will stay connected even when the unit is switched to Internal Memory
• When there is an incoming call during Internal Memory mode, the unit will switch to phone call mode

1. When in the Bluetooth mode, triple click the RIGHT button to switch to Internal Memory Triple beep sound will be heard.
2. Music will be played back automatically from the internal
3. To switch back to Bluetooth mode, triple click the RIGHT button Double beep sound will be heard.

Adding songs to the internal memory

1. Turn the power
2. Connect the unit to PC’s USB terminal by using the provided charging
3. A new drive with the name “USB Drive” will appear in PC after connecting
4. Copy the desired MP3 music files into this drive to playback through HP-BC50.
5. Triple click the RIGHT button to switch to Internal Memory mode. The music will be played back

Note: Internal Memory mode only applicable if MP3 file is detected in internal memory. Otherwise, HP-BC50 will not be able to switch to Internal Memory mode.

Music mode

Various music functions

Phone Call Mode

Various Phone Call Functions

Charging Operation

Charging the Unit

1. Place the cable with charging head at the end to the charging terminal on the unit as shown.
2. The unit’s red indicator lights up to indicate under
3. The unit’s blue indicator lights up to indicate fully

Before using any adapter with the charging cable, check whether the specifications of the adapter meets the requirements. The recommended output voltage of the adapter is DC5V+/-0.25V, and the recommended output current is 0.5A. An over-high charging voltage may damage the charging cable and unit.
Warning: Use the recommended adapter whenever possible. Use of other types of adapters may violate the warranty terms of the equipment and is hazardous. Use the provided charging cable to connect with a certified adapter or computer to charge the unit. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized dealer or service center.

Troubleshooting Chart

Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized dealer or service center.

Note: Do not use chemical/oil to clean the charging terminal point.

Factory reset, clearing all memory

To reset the unit, during power on, press and hold LEFT button for 5 seconds. Double beep will be heard after reset is completed.

Specification

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual unit.

The time may vary depending on the ambient temperature and the conditions used.

Bluetooth