Toshiba TS205 2.0 Channel Sound Bar Home Theater System User Guide

TS205 2.0 Channel Sound Bar Home Theater System
User Guide

What’s in the Box

Remote control

  1.   (ON/OFF) Switch the unit between ON and STANDBY mode.
  2.  (MUTE) Mute or resume volume.
  3. SOURCE buttons: Select the play mode.
  4.  , In Bluetooth/USB mode: Skip to the previous/next track.
  5.   /PAIR:
    Play/pause/resume playback in Bluetooth/USB mode.
    Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
  6. VOL+/VOL- Increase/decrease the volume level.
  7. EQ buttons: Select a preset sound effect.

First-time use：
Remove the protective tab to activate the remote control battery.

Replace the Remote Control Battery

Do not expose the battery or battery pack to sunshine, fire, or other direct heat sources.

Identifying the Parts

Main Unit

1. Remote Control Sensor
Receive signal from the remote control.
2. LED Indicators
• Red: In STANDBY mode.
• Orange / Orange flash : In Optical / Coaxial mode.
• Blue: In Bluetooth mode.
• White: In HDMI ARC mode.
• Green / Green flash: In LINE IN / USB mode.
3. Screws
Remove the screws then install the wall mounting screws into the back of the unit.
4.  (ON/OFF) Button
Switch the unit between ON and Standby mode.
5. +/- (Vol+/Vol-) Buttons
Increase/decrease the volume level.		 6.  (SOURCE) Button
Select the play function.
7. AC~ Socket
Connect to the power supply.
8. LINE IN Socket
Connect to an external audio device.
9. USB
Socket Insert the USB device to play music.
10. HDMI ARC Socket
Connect to a TV via HDMI cable.
11. COAXIAL Socket
Connect to a coaxial audio output on the TV.
12. OPTICAL Socket
Connect to an optical audio output on the TV.

Connections

  • Before connecting the AC power cord, ensure you have completed all other connections.

Basic Operation

◎ Standby/ON
When you first connect the main unit to the main socket, the main unit will be in Standby mode.

  • Press the button on the unit or on the remote control to switch the unit ON.
  • Press the button again to switch the unit back to STANDBY mode.
  • Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

Auto Wake
If a TV or an external device is connected (LINE IN / OPTICAL / COAXIAL / HDMI ARC), the unit will switch on automatically when the TV or the external device is switched on.
Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, and switched off.

  • To switch the unit off completely, remove the main plug from the main socket.
  • Please turn the unit off completely to save energy when not in use.

◎ Select Modes
Press the (SOURCE) button repeatedly on the unit or press the OPT/COAX, (Bluetooth), HDMI ARC, USB, and LINE IN buttons on the remote control to select the desired mode. The indicator light on the front of the main unit will show which mode is currently in use.
◎ Adjust the Volume
Press the VOL+ / VOL− buttons on the unit or on the remote control to adjust the volume.
If you wish to turn the sound off, press the (MUTE) button on the remote control. Press the (MUTE) button again or press the VOL+ / VOL− buttons on the unit or on the remote control to resume normal listening.
◎ Select a Preset Sound Effect
While playing, press the NEWS / MOVIE / MUSIC buttons on the remote control to select the preset equalizers:

  • MOVIE (recommended for viewing movies)
  • MUSIC (recommended for listening to music)
  • NEWS (recommended for listening to the news)

Bluetooth( ) Operation

Wall Mounting