Philips TAW8805 Top Victory Electronics Smart Display Instructions

TAW8805 Top Victory Electronics Smart Display

Smart Display
TAW8805
www.philips.com/welcome

Important

This electronic user’s guide is intended for anyone who uses the Philips Smart display. Take time to read this user manual before you use the Philips Smart display. It contains important information and notes regarding operating the Philips Smart display.
The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions, and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name, and modeland production number of the product.
Before operating the Philips Smart display, please read this manual thoroughly. This manual should be retained for future reference.

1.1 Safety precautions and maintenance

Warnings
Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

Operation

• Please keep the Philips Smart display out of direct sunlight, with very strong bright lights, and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
• When positioning
  the Philips Smart display, make sure the power plug and outlet are easily accessible.
• If turning off the Philips Smart display by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.
• Please use the approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center.
• Operate under the specified power supply. Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and
  may cause fire or electric shock.
• Protect the cable. Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables, if damaged, the cables may
  cause fire or electric shock.
• Do not subject the Philips Smart display to severe vibration or high impact conditions during operation.
• Do not knock or drop the Philips Smart display during operation or transportation.

Maintenance

• To protect the Philips Smart display from possible damage, do not put excessive pressure on the LCD panel. When moving the Philips Smart display, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on
  the LCD panel.
• Unplug the Philips Smart display if you are not going to use it for an extensive period of time.
• Unplug the Philips Smart display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use
  organic solvents, such as alcohol, or ammonia-based liquids to clean your monitor.
• To avoid the risk of shock or permanent damage to the set, do not expose the Philips Smart display to dust, rain, water, or excessive moisture environment.
• If the Philips Smart display gets wet, wipe it with a dry cloth as soon as possible.
• If a foreign substance or water gets in the Philips Smart display, please turn the power off immediately and disconnect the power cord.
  Then, remove the foreign substance or water, and send it to the maintenance center.
• In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH

Service

•  The casing cover should be opened only by qualified service personnel.
• If there is any need for any document for repair or integration, please contact with your local service center.

Note
Consult a service technician if the monitor does not operate normally, or if you are not sure what procedure to take when the operating instructions given in this manual have been followed.
This device complies with Part 15 of the  FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced technician for help.
If power exceeds the limit and the distance (Over 20cm distance in actual use between the device and user) is compliant with the requirement FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

1.2 Notational Descriptions

The following subsections describe the notational conventions used in this document.
Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or
warnings. They are used as follows:
Note
This icon indicates important information and tips that help you make better use of your computer system.
Caution
This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Warning
This icon indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.

1.3 Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE

This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for the disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.
Your new display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the number of reusable materials and to minimize the amount be disposed of. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials.
Please find out about the local regulations on how to dispose of your old display and packing from your sales representative.

Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s products, services, and activities.
From the planning, design, and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back programs with the contractor company. Your display is manufactured with high-quality materials and components that can be recycled and reused. To learn more about our recycling program please visit
http://www.philips.com/a-w/about/sustainability.html

Setting up the Philips Smart Display

2.1 Installation

1. Package contentsNote
   Use only the AC/DC adapter provided by Philips.
   
2. Plug in the Philips Smart display
3. Connect to HDMI for an external display
   Connect with other devices with a quick and easy HDMI-out connection. The Philips Smart Display is suitable for most of your home environments, you can connect with a TV in the living for optimal video viewing, and connect with a monitor in a study room for multiple uses.

2.2 Operating

the Philips Smart display

1. Description of the control buttons
2. Physical Function
3. Follow the on-screen initialization setting

On-screen menu

To access the settings, swipe down from the top of the screen.

Select [Settings], you can enter the onscreen setting menu.

3.1 Network

To connect the Philips Smart display to the Internet wirelessly, you need a Wi-Fi router with a connection to the Internet.

1.  Make the connection
   1. In the list of found networks, select your wireless network. If your network is not in the list, select (the refresh icon) on the top-right of the screen to re-detect your wireless network.
   2. You can check Wi-Fi signal strength, link speed, frequency, security type, and IP address.

3.2 Home screen
To set what you want to show on the home screen of the Philips Smart display.

 Note
To get the better-synchronized content, we recommend that you check the Alexa app on your smartphone to ensure that the Philips Smart display uses the same area and time zone settings.

3.3 Bluetooth
Position the Bluetooth device within a distance of 5 meters from the Philips Smart display. Read the user manual of the device for specific information on pairing and on the wireless range. Make sure the Bluetooth setting on the Philips Smart display is switched on.

3.4 Device options
To set the device name, language, area, time zone, the display way on time and temperature. Or you can reset the Philips Smart display to the factory default settings.

Note
To get better-synchronized content, we recommend that you check the Alexa app on your smartphone to ensure that the Philips Smart display uses the same area and time zone settings.

3.5 Sound
You can set the audio source from the connected HDMI device or from the Philips Smart display.

3.6 Login Alexa and Google account

1. About Alexa built-in, This Philips Smart Display with Alexa built-in.
   Amazon Alexa lives in the cloud and is always getting smarter. Ask Alexa to play music, hear the news, check the weather, and more. You can also control your smart home with Alexa, forexample by saying “Alexa, turn down my Hue lights”.
2. About Alexa Skill
   Alexa uses the Alexa Skills to extend the voice control operations. Skills add new capabilities that create a more personalized experience with the Philips Smart display. On Alexa Skills store, it offers various voice control commands to work with the Philips Smart display.
   * Alexa is not available in all languages and countries.
   * Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
3. Using Alexa
   To use Alexa, you need to first log in to the Alexa client service on the Philips Smart display. Follow the on-screen instructions to complete the login.
   4 Using Google Photo
   You can store photos from the camera of the Philips Smart display or show your google photo on the home screen. Follow the on-screen instructions to complete the login.

3.7 Ambiglow setting
Ambiglow adds a new dimension to your viewing experience. You can set Ambilglow to follow the screen content or the audio dynamics of the Philips Smart display. Alternatively, you can set Ambiglow to show a preset color style or you can switch Ambiglowoff.
It is recommended that you dim the lighting conditions in your room for maximum effect. Ensure that Ambiglowis set to “on” mode. The Philips Smart Display will react with appropriate colors creating a halo effect, overall matching the image on the screen or audio dynamics.

3.8 Display setting
You can set the Philips Smart display to switch to Standby mode automatically after a preset time, and also set the screen content type while in Ambient mode.
3.9 Help and support
You can find Frequency Asked Questions or get Alexa tips on the Philips Smart display.

Technical Specifications

2020 © TOP Victory Investment Ltd. All rights reserved.
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. and are used under license.
Specifications are subject to change without notice.