Bosch UniversalGrassCut 18V-26 Cordless Grass Trimmer Instruction Manual

BOSCH Universal Grass Cut 18V-26 Cordless Grass Trimmer

Safety Notes
Warning! Read all safety warnings and all instructions. Make yourself familiar with the controls and the proper use of the product. Please keep the instructions safe for later use!

  • General hazard safety alert.
  • Read instruction manual.
  • Make sure that bystanders are not injured by foreign objects being thrown away.
  • Warning: Keep a safe distance to the product when operating.
  • Not applicable.
  • Remove battery before adjusting or cleaning, and before leaving the machine unattended for any period.
  • Wear eye and ear protection
  • Do not use the product in the rain or leave it outdoors when it is raining.
  • Make sure that bystanders are not injured by foreign objects being hurled away.
    Warning: Keep a safe distance from the machine when operating.
  • Carefully check the area where the tool is to be used for wildlife and pets. Wildlife and pets may be injured while the machine is in operation. Thoroughly check the working area and remove any stones, sticks, wires, bones and foreign objects. When using the machine, ensure that no wildlife, pets or small tree stumps are hidden in the dense grass.
  • Do not use a high-pressure washer or a garden hose to clean the machine

General Safety Warnings for Trimmers

Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.

  • Save all safety warnings and instructions for future reference.
  •  The term machine in the warnings refers to your mains-operated (corded) machines or battery-operated (cordless) machines.
Work area safety
  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Do not operate the machine in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.
  • Keep children and bystander away while operating the machine. Distractions can cause you to lose control over the machine. Never operate the machine while people, especially children or pets, are nearby.
Electrical safety
  • The plug of the machine must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
    (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
  • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose the machine to rain or wet conditions. Penetration of water in the machine increases the risk of an electric shock.
  • Never use the cord for carrying, hanging up or unplugging the machine. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
  • When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
  • When operating the machine in damp environments is unavoidable, use a residual current device (RCD). The use of a residual current device (RCD) reduces the risk of electric shock.
Personal safety
  • Stay alert, watch what you are doing and use common sense when operating the machine. Do not use a machine while you are tired or
    under the influence of drugs, alcohol or medication. A moment of inattention while operating the machine may result in serious personal injury.
  •  Wear safety equipment. Always wear eye protection. Wearing safety equipment such as dusk mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
  • Prevent unintentional starting. Ensure the switch is in the off‑position before connecting to power source and/or battery, picking up or carrying the machine. Carrying machines with your finger on the switch or plugging in machines that have the switch on invites accidents.
  • Remove any adjusting key or spanner before turning the machine on. A spanner or a key left attached to a rotating part of the machine may result in personal injury.
  • Avoid abnormal body posture. Provide for a secure stance and keep your balance at all times; never run. This enables better control of the machine in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Always wear sturdy footwear and long trousers when operating the machine.
  •  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards.
  •  Do not assume a false sense of security and disregard the safety regulations for machines, even if familiar with the machine through  multiple use. A careless action can cause severe injury within a fraction of a second.
Use and Handling of the Machine
  • Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it was designed.
  •  Do not use the machine if the switch does not turn it on and off. Any machine that cannot be con-trolled with the switch is dangerous and must be repaired.
  • Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the machine before making any adjustments, changing accessor-ies, or storing machines. Such preventive safety measures reduce the risk of starting the machine accident-ally.
  •  Store idle machines out of the reach of children. Do not allow persons unfamiliar with the ma-chine or these instructions to operate the machine. Trimmers are dangerous in the hands of untrained users.
  •  Maintain trimmers with care. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the operation of the ma-chine. Have damaged parts re-paired before using the machine. Many accidents are caused by poorly maintained machines.
  • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
  •  Use the machine, accessories, ap-plication tools, etc. according to these instructions. Take the work-ing conditions and the work to be performed into account. Use of ma-chines for operations different from those intended could result in a haz-ardous situation.
  • Keep handles and grasping sur-faces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the ma-chine in unexpected situations.
Battery tool use and care Remove the battery pack
  • whenever the machine is left by the user
  • before clearing a blockage
  • before checking, cleaning or working on the machine
  • after striking a foreign object to inspect the machine for damage
  • if the machine starts to vibrate ab-normally, for immediately check
  1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
  2. Use power tools only with specific-ally designated battery packs. Use of any other battery packs may create a risk of injury and fire.
  3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
  4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accident-ally occurs, flush with water. If li-quid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
  5. Do not use a battery pack or tool that is damaged or modified. Dam-aged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
  6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
  7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
  • Have your machine serviced by a qualified repair person using only identical replacement parts. This ensures that the safety of your ma-chine is maintained.
  • Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Safety Notes Operation
  • The operator must use the product in accordance with the regulations. The local conditions must be taken into account. When working, pay attention to other people, especially to children.
  • Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the product. Local regulations may re-strict the age of the operator.
  • Children should be supervised to en-sure that they do not play with the product.
Application
  • When working with the machine, always hold it firmly with both hands and provide for a secure stance. The garden tool is guided more secure with both hands.
  • Always wait until the machine has come to a complete stop before placing it down.
  • Never operate the machine with a defective protection guard/cover or without safety device. Ensure that these are properly mounted. Never use the garden tool when incomplete or after unauthorized changes.
  • Never operate the machine if the cord is damaged or worn.
  • Never replace non-metallic cutting elements with metal cutting elements.
  • Never repair the garden tool yourself unless you are qualified to do so.
  • Other persons and animals should remain or be kept a suitable distance away when using the garden tool. The operator is responsible for third parties in the work area.
  • Wait until the cutting head has completely stopped before touching it. The cutting head continues to rotate after the trimmer is switched off; a rotating cutting head can cause in-jury.
  • Work only in daylight or in good artificial light.
  • Avoid operating the trimmer in bad weather conditions especially when there is a risk of lightning.
  • Operating the trimmer in wet grass decreases the efficiency of performance.
  • When transporting, switch the ma-chine off and remove the battery.
  • Always ensure a safe working position when working with the trimmer. Always keep your hands and feet at a safe distance from rotating parts.
  • Keep the balance all the time while trimming to prevent falling over.
  • Take care when placing product on floor, as it may become a trip hazard.
  • Remove the battery before replacing the spool.
  • Inspect and maintain the trimmer regularly.
  • Always wear gloves when cleaning product or replacing cutting means.
  • Be careful of injuries from the blade used for cutting the cutting line. After feeding cutting line, always re-turn the trimmer to a horizontal working position before switching on.
  • Switch the machine off and remove the battery.
    • whenever you leave the machine unattended for any period of time
    •  before replacing the cutting line
    •  before cleaning or working on the trimmer
    • before storing the trimmer
  • Store the product in a secure, dry place out of the reach of children. Do not place other objects on top of the product.
  • Do not use the garden tool as a walking stick.
Recommendations for Optimal Handling of the Battery Pack
  • Do not open the battery. There is a risk of short-circuiting.
  • Protect the battery against heat (e.g., against continuous intense sunlight), fire, water, and moisture. There is a risk of explosion.
  • In case of damage and improper use of the battery pack, vapours may be emitted. Ventilate the area and seek medical help in case of complaints.
  • The vapours can irritate the respiratory system.
  • Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous over-load.
  •  The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.
  • Do not short-circuit the battery. There is a risk of explosion.
  • Occasionally clean the venting slots of the battery using a soft, clean and dry brush.
Safety Warnings for Battery Chargers

Read all safety warnings and all instructions. Failure to follow the safety warningsand instructions may result in electric shock, fire and/or serious injury. Save all safety warnings and instructions for future reference.

  • Use the battery charger only when you fully understand and can per-form all functions without limitation, or have received appropriate instructions.
  • Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the battery charger. Local regulations may restrict the age of the operator.
  •  Supervise children at all times. This will ensure that children do not play with the battery charger.
  • Charge only Bosch lithium-ion batteries with a capacity above 1.5 Ah (with at least 5 rechargeable battery cells). The battery voltage must match the battery charging voltage of the charger. Do not charge non-re-chargeable batteries. Otherwise there is a danger of fire and explosion.
  • Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an electric shock.
  • Keep the charger clean. Dirt poses a risk of electric shock.
  • Always check the charger, cable and plug before use. Stop using the charger if you discover any damage. Do not open the charger yourself, and have it repaired only by a qualified specialist using only original replacement parts. Dam-aged chargers, cables and plugs in-crease the risk of electric shock.
  • Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.) or in a flammable environment. There is a risk of fire due to the charger heating up during operation.
  • Do not cover the ventilation slots of the battery charger. Otherwise, the battery charger can overheat and no longer operate properly.
  • For increased electrical safety, we recommend using a residual current device with a max. tripping current of 30 mA. Before using, always check your residual current device.
Symbols

The following symbols are important for reading and under-standing the original instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the product in a better and safer manner.

Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
LICK! Audible noise
Accessories/Spare Parts
Recommended position for grass cutting
Recommended position for edge trimming
Recommended position for cutting under bushes

Intended Use

The garden tool is intended for domestic use, for trimming grass, weeds and nettles. It is designed for trimming grass growing on slopes, under obstacles and lawn edges that can-not be reached by the lawn mower. The garden tool is not designed for use as a brush cutter. The garden tool is not in-tended for commercial or industrial use.

Deliver scope (see figure B)

Carefully remove the machine from its packaging and check if the following parts are complete:

  • Grass trimmer
  • Protection guard
  • Wheel
  • Battery**
  • Charger**
  • Original instructions

When parts are missing or damaged, please contact your dealer.  country specific

Product Features (see figure A)

The numbering of the product features refers to the illustration of the product on the graphics pages.

  1. Battery unlocking button
  2.  Batterya
  3.  Folding handle
  4. Foot pedal for adjusting the working angle for lawn trimming/edge cutting
  5. Protection guard
  6. Wheel
  7. Handle-adjustment release
  8. On/Off switch
  9. Lock-off button for On/Off switch
  10.  Button for adjustment of the working height
  11. Lever
  12. Charger
  13.  Spool cover
  14.  Spool
  15.  Hole for line wind-up
  16. Clamping ring
  17.  Hook for threading-in the cutting line
  18. Slot for line guiding
  19. Hole for line guiding

Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data

Article number 3 600 HC1 D.. 3 600 HC1 E..
 3 600 HC1 D03
Rated voltage V= 18 18
No-load speed min–1 7300 7300
Cutting line diameter mm 1.6 1.6
Cutting diameter cm 26 26
Cutting spool capacity m 6 6
Height adjustment cm 120 − 140 120 − 140
Folding handle ● ●
Edge cutting ● ●
Plant protector/Wheel ● ●
Weight according to EPTA‑Procedure 01:2014
Set (with battery)		 kg

kg

 2.3

2.7

 2.3

2.7

Serial number see type plate on garden tool
Recommended ambient temperature during charging °C 0 … +35 0 … +35
Permitted ambient temperature during operation
A) and storage		 °C -20 … +50 -20 … +50
Battery Type PBA 18V…W-.
1,5 Ah, 2,0 Ah, 2,5 Ah, 4,0 Ah, 6,0 Ah		 PBA 18V…W-.
1,5 Ah, 2,0 Ah, 2,5 Ah, 4,0 Ah, 6,0 Ah
Limited performance at temperatures < 0 °C
Charging current A 1.0 2.0 3.0 8.0
– Battery with 1.5 Ah min 94 50 33 27
– Battery with 2.0 Ah min 124 65 45 30
– Battery with 2.5 Ah min 154 95 60 36
– Battery with 4.0 Ah min 244 125 95 35
– Battery with 6.0 Ah min 364 150 130 62
Weight according to EPTA‑Pro- cedure 01:2014 kg 0.17 0.48 0.40 0.60
Protection class / II / II / II / II
Noise/Vibration Information
– Sound pressure level dB(A) 77 76.5
– Sound power level dB(A) 87 89
– Uncertainty K dB = 3 = 3
– Vibration emission value ah m/s2 7 7
– Uncertainty K m/s2 = 1.5 = 1.5

The vibration level given in these instructions has been measured in accordance with a standar dised measuring procedure and may be used to compare power tools. It can also be used for a preliminary estimation of exposure to vibration.
The stated vibration level applies to the main applications of the power tool. However, if the power tool is used for different applications, with different application tools or poorly maintained, the vibration level may differ. This can significantly increase the exposure to vibration over the total working period.  To estimate the exposure to vibration accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This can significantly reduce the exposure to vibration over the total working period.
Implement additional safety measures to protect the operator from the effects of vibration, such as servicing the power tool and application tools, keeping the hands warm, and organising workflows correctly.

Mounting and Operation
Product Features A 459
Delivery scope B 460
Mounting the protection guard C 460
Adjusting the working height D 461
Folding out the handle E 462
Mounting the wheel F 462
Battery charging and inserting G 463
Switching On and Off H 463
Recommended position for grass cutting I 464
Recommended position for edge trimming J 465
Recommended position for cutting under bushes K 466
Removing the line spool L 467
Winding line on spool M 468
Mounting the line spool N 469
Maintenance, Cleaning and Storage O 469
Accessories P 470

Assembly

  • Caution: Switch the garden tool off and remove the battery before performing any maintenance.
Mounting the protection guard (see figure C)

Slide the protection guard (5) onto the trimmer head until a click can be heard. Affix the protection guard (5) to the trimmer with the screw. The screw is already fitted to the bottom housing upon delivery. Never use the trimmer without the protection guard (5) mounted. After mounting, the protection guard (5) may not be removed from the trimmer.

Adjusting the working height (see figure D)

Press button (10) and adjust the trimmer to the desired height. Release button (10).
Always use the trimmer in a working position, never in the storage position. The storage position is when the trimmer is fully retracted. When adjusting the working position, make sure that the mechanism for height adjustment is properly locked. A click can be heard when the mechanism engages.

Folding out the handle (see figure E)

Press and hold button (7), fold out the handle (3) to the stop and then release button (7). Make sure that the handle (3) is properly locked. Do not put the pressure on the handle (3) while adjusting it.

Mounting the wheel (see figure F)

Mount wheel (6) to the trimmer head. Observe correct position of the arrows on the trimmer head. Ensure that the hook engages properly in the tab. Turn the wheel (6) against the trimmer head until the lever (11) can be heard to engage with a click.
To remove, pull lever (11) until it disengages and remove the wheel (6) in opposite direction.

Switching on

  • Caution: Switch garden tool off and remove battery from machine before adjusting or cleaning.
Charging the Battery
  • Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the charger.

The battery is equipped with temperature monitoring that al-lows charging only in the temperature range between 0 °C and 35 °C. In this manner, a high battery service life is achieved.
Note: The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using for the first time.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not cause damage to the battery. The “Electronic Cell Protection (ECP)” protects the lithium-ion battery against deep discharging. When the battery is empty, the product is switched off by means of a protective circuit: The product no longer operates. Do not continue to press the On/Off switch after an auto-matic shut-off of the product. The battery could become damaged. Observe the notes for disposal of the battery.

Inserting/Removing the Battery (see figure G)

Note: Using unsuitable batteries can lead to malfunctions or damage the machine.

Insert the charged battery (2). Ensure the battery is inserted correctly. To remove the battery (2) from the machine, press the bat-tery unlocking button (1) and pull the battery out.

Charging Procedure

The charging procedure starts as soon as the mains plug of the charger is plugged into a socket outlet and the battery (2) is inserted onto the charger (12). Due to the intelligent charging method, the charging condition of the battery is automatically detected and the battery is charged with the optimum charging current, depending on battery temperature and voltage. This gives longer life to the battery and always leaves it fully charged when kept in the charger for storage. Meaning of the Indication Elements (AL 1810) Flashing battery charge indicator The charging process is indicated by the flashing of the battery charge indicator .

Solid light on battery charge indicator

A solid light on the battery charge indicator signals that the battery is fully charged or that the temperature of the battery is not within the permitted charging temperature range, and can therefore not be charged. The battery is charged as soon as the allowable charging temperature range is reached.
When the battery is not inserted, a solid light on the battery charge indicator signals that the mains plug is inserted in the plug socket and that the charger is ready for operation.

Meaning of the Indication Elements (AL 1830 CV)

(Fast) Flashing of the Green Battery Charge Indicator The rapid-charging procedure is indicated by fast flashing of the green battery charge indicator .
Note: The rapid-charging procedure is only possible when the battery temperature is within the allowable charging temperature range, see section “Technical Data”.

(Slow) Flashing of the Green Battery Charge Indicator
When the charging condition of the battery is 80%, the green battery charge indicator flashes slowly. The battery can be removed for immediate use.

Continuous Lighting of the Green Battery Charge Indicator
Continuous lighting of the green battery charge indicator indicates that the battery is fully charged. When the battery is not inserted, continuous lighting of the battery charge indicator indicates that the mains plug is inserted in the socket outlet and that the battery charger is ready for operation.

Continuous Lighting of the Red Battery Charge Indicator
Continuous lighting of the red battery charge indicator indicates that the temperature of the battery is not within the allowable charging temperature range, see section “Technical Data”. As soon as the allowable charging temperature range is reached, the battery charger automatically switches to rapid charging.

Flashing Red Battery Charge Indicator
A flashing red battery charge indicator indicates a different malfunction of the charging procedure, see section “Troubleshooting – Causes and Cor rective Measures”.

Operation
  • Caution: Switch the garden tool off and remove the battery before performing any maintenance.
  • The cutting line continues to rotate for a few seconds after the trimmer is switched off. Allow the motor/cut-ting line to stop rotating before switching on again.
  • Do not briefly switch off and on again several times in a row.
  • Only use Bosch approved cutting elements. Cutting performance will vary with different cutting elements.
Switching On and Off (see figure H)

To switch on, firstly press the lock-off button (9). Then press the On/Off switch (8) and keep it pressed. To switch off, release the On/Off switch (8).

Lawn Trimming/Edge Cutting (see figures I − K)

Lawn trimming (see figure I) Press the foot pedal (4) and set the 48° angle for lawn trimming.

Troubleshooting

Lawn trimmer/Edge cutter

Motor refuses to start Battery discharged Recharge battery.
Battery too hot/cold Allow to cool/warm.
Garden tool functions intermittently On/Off switch defective Contact Bosch customer service agent.
Internal wiring of garden tool defective Contact Bosch customer service agent.
Garden product la- bours Grass too high Cut in stages.
Garden tool does not cut Cutting line too short/broken off Manually feed cutting line.
Spool empty Replace line spool.
Cutting line can no Line inside the spool entangled Inspect the spool, rewind if necessary.
longer be fed Spool empty Refill line spool.
Incorrect winding Rewind the spool.
Excessive line Shorten line to correct length.
Line entangled Problems with the line feed system Contact Bosch customer service agent.
Line retracts into spool Cutting line too short/broken off Remove spool – rethread line (see figures L − N).
Line breaks frequently Line inside the spool entangled Remove spool – rewind line (see figures L − N).
Trimmer used incorrectly Only trim with the tip of the line, avoid touching stones, walls and other hard objects. Feed the line regularly to maintain full cutting diameter.
Trimmer vibrates ab- normally Clamping ring or spool cover not mounted to spool Mount clamping ring or spool cover onto spool.
Clamping ring incorrectly positioned Reposition clamping ring.
Cutting system damaged Contact Bosch customer service agent.
Clamping ring worn Purchase new spool accessory with clamping ring.
Battery and charger
Flashing red battery Battery not (properly) inserted Properly insert battery in charger.
charge indicator

No charging procedure possible

 Battery contacts contaminated Clean the battery contacts (e. g. by inserting and removing the battery several times) or replace the battery.
Battery defective Replace the battery.
Battery charge indicators do not light up Mains plug of battery charger not plugged in (properly) Insert mains plug (fully) into the socket outlet.
Socket outlet, mains cable or battery charger defective Check the mains voltage; have the battery charger checked by an authorised after-sales service agent for Bosch power tools.

Maintenance and Service

  • Before any work on the garden product itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the garden product. There is danger of injury when uninten-tionally actuating the On/Off switch.
Maintenance, Cleaning and Storage
  • For safe and proper working, always keep the product clean.
  • For safe and proper working, always keep the garden tool and the ventilation slots clean.
  • Never spray the garden tool with water.
  • Never immerse the garden tool in water.
  • Store the garden product in a secure, dry place, out of the reach of children.
  • Do not place other objects on the garden product.
  • Make sure that the clamping ring is always attached to the spool during use.
  • Otherwise, high vibrations may occur.
Battery Maintenance

Use the following procedures to enable optimum usage of the battery:

  • Protect the battery against moisture and water.
    • Store the machine and battery only within a temperature range between –20 °C and 50 °C . As an example, do not leave the battery in the car in summer.
    • It is recommended that the battery is not stored within the product but stored separately.
  • Do not leave the battery in the product in direct sunlight.
  • The ideal storage condition for the battery is 5 °C.
  • Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

A significantly reduced working period after charging indicates that the battery is used and must be replaced.

After-Sales Service and Application

Service

Our after-sales service responds to your questions concern-ing maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessor-ies. In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: (0344) 7360109
E-Mail:
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses

Transport

The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road-transport by the user without further restrictions. When shipping by third parties (e.g.: by air transport or for-warding agency), special requirements on packaging and la-belling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is re-quired.
Dispatch battery packs only when the housing is undam-aged. Tape or mask off open contacts and pack up the bat-tery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more de-tailed national regulations.

Disposal
  • The product, batteries, accessories and pack-aging should be sorted for environmental-friendly recycling.
  • Do not dispose of the product and batteries/re-chargeable batteries into household waste!

Only for EU countries:
According to the European Guideline 2012/19/EU, products that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Only for United Kingdom According to Waste Electrical and Electronic Equipment Regulations 2013 (2013/3113) and the Waste Batteries and Accumulators Regulations 2009 (2009/890), power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. Battery packs/batteries: Li-ion: Please observe the notes in the section on transport .