Lenovo ThinkBook 14s Gen 3 User Guide

Lenovo ThinkBook 14s Gen 3

Read this first
Before using this documentation and the product it supports, ensure that you read and understand the following:

• Generic Safety and Compliance Notices
• Safety and Warranty Guide
• Setup Guide

First Edition (July 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS- 35F-05925.

About this guide

• This guide applies to Lenovo product model(s) listed below. Illustrations in this guide may look slightly different from your product model.
  

  Model name	Machine type (MT)
  ThinkBook 13s G3 ACN	20YA
  ThinkBook 14s G3 ACN	20YB

• For further compliance information, refer to the Generic Safety and Compliance Notices at https://pcsupport.lenovo.com/docs/generic_notices.
• This guide may contain information about accessories, features, and software that are not available on all models.
• This guide contains instructions that are based on the Windows operating system. These instructions are not applicable if you install and use other operating systems.
• Microsoft® makes periodic feature changes to the Windows® operating system through Windows Update. As a result, the operating system related instructions may become outdated. Refer to Microsoft resources for the latest information.
• The content of the guide is subject to change without notice. To obtain the latest version, go to https://support.lenovo.com.

Chapter 1. Meet your computer

Front

1. Microphones	Capture or record sound and voice.
2. Camera	Capture still and moving images for taking photos, recording videos, and video chatting.
3. Camera cover slider	Move the slider to cover or uncover the camera lens. Note: The camera cover helps you better protect your privacy.
4. Camera light	If the light is on, the camera is in use.
5. Screen	Display text, graphics, and videos.

Base

1. Power light/Fingerprint reader light
   The light shows power status of the computer. If the computer includes a fingerprint reader, it can also show the status of the reader.
   • Power light
     Solid white: The computer is turned on.
     Blinking white: The computer is in sleep mode.
     Off: The computer is turned off or in hibernation mode.
   • Fingerprint reader light
     Blinking green: The fingerprint reader is starting.
     Solid green: The fingerprint reader is waiting for you to scan your fingerprint.
     Note: You can turn on the computer by flipping open the LCD screen if Flip to Boot is enabled.
2. Power button/Fingerprint reader
   • Press the button to turn on the computer or put the computer into sleep mode.
     Note: You can turn on the computer by flipping open the LCD screen if Flip to Boot is enabled.
   • Enroll and read your fingerprint for user authentication.
3. Wireless antennas
   Send and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module.
   Notes:
   • The antennas are not visible from the outside of the computer.
   • If the location of the antennas is close to the user’s body (< 20 cm), you can find the Specific Absorption Rate (SAR) values in the Setup Guide that comes with your computer.
4. Keyboard
   Enter characters and interact with programs.
   Note: The keyboard also includes hotkeys and function keys for changing settings and performing tasks quickly.
5. Touchpad
   Perform finger touch and all the functions of a traditional mouse. Note: The touchpad also supports multi-touch function.

Left

1. Power connector/USB-C® connector
   Connect to power with the included power cord and ac power adapter.
   Connect external display, storage, or data devices.
   Note: An appropriate adapter may be needed for connecting external devices.
2. Charging light: Indicate whether the computer is connected to ac power.
   • Solid white: Connected to ac power; battery capacity 91%–100%
   • Solid amber: Connected to ac power; battery capacity 1%–90%
   • Off: Not connected to ac power
3. HDMI™ connector
   Connect to a compatible digital audio device or video monitor, such as an HDTV.
4. Combo audio jack
   Connect to headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug.
   Note: This jack does not support standalone external microphones. If you use headsets, choose one with a single plug.
5. Novo buttonhole
   Press the Novo button to open the Novo Button menu. From the menu, you can choose to open the UEFI/BIOS setup utility, the Boot menu, or the Windows startup options screen.
6. Status light
   • Solid white: The computer is turned on; battery capacity 21%–100%
   • Blinking fast in white: The computer is turned on; battery capacity 1%–20%
   • Blinking slowly in white: The computer is in sleep mode
   • Off: The computer is turned off

Right

1. USB (3.2 Gen 1) Type-A connector
   Connect to a USB-compatible device, such as a USB keyboard, a USB mouse, a USB storage device, or a USB printer.
2. USB (3.2 Gen 1) Type-A connector (always-on)
   The always-on connector can charge external devices when the computer is turned off, in sleep or hibernation mode. The always-on function can be turned on or off in the UEFI/BIOS setup utility. Note: If Lenovo Vantage is pre-installed on your computer, you can also set always-on function from within that software.
3. Nano security-lock slot
   Lock your computer to a desk, table, or other fixtures through a compatible security cable lock.

Bottom

1. Ventilation slots (inlet)
   Maintain the incoming airflow to dissipate internal heat.
   Note: Do not block the ventilation slots. Otherwise, the computer might overheat.
2. Speakers
   Produce sound.

Features and specifications

Dimensions

• ThinkBook 13s G3 ACN
  Width: 298.9 mm (11.76 inches)
  Depth: 210 mm (8.26 inches)
  Thickness: 15.5 mm (0.61 inches)
• ThinkBook 14s G3 ACN
  Width: 320.9 mm (12.63 inches)
  Depth: 207 mm (8.14 inches)
  Thickness: 15.5 mm (0.61 inches)

ac power adapter 

• Input: 100 V ac–240 V ac, 50 Hz–60 Hz
• Output: 20 V dc, 3.25 A
• Power: 65 W

Battery pack

• Capacity: 56 Wh
• Number of cells: 4

Microprocessor

To view the microprocessor information of your computer, type system information in the Windows search box and then press Enter.

Memory

• Type: Low Power Double Data Rate 4x (LPDDR4x) on board
• Number of slots: 0

Storage device

• Type: solid-state drive
• Form factor: M.2 (2242)
• Bus: PCI Express

Screen

• ThinkBook 13s G3 ACN
  Size: 337.82 mm (13.3 inches)
  Display resolution
  2560 × 1600 pixels (WQXGA model)
  1920 × 1200 pixels (WUXGA model)
• ThinkBook 14s G3 ACN
  Size: 355.6 mm (14 inches)
  Display resolution
  1920 × 1080 pixels (FHD model)

Keyboard

• Function keys
• Hotkeys
• Keyboard backlight

Connectors and slots

• Combo audio jack
• USB Type-A connector × 2 (one connector with Always-On function)
• USB-C connector
  Support data transfer rates up to 10 Gbps for USB 3.2 Gen 2
  Provide power output up to 5 V and 3 A
  Support DisplayPort 1.4
• HDMI connector

Security features

• Fingerprint reader
• Nano security-lock slot
• UEFI/BIOS passwords
  Administrator password
  User password
  Master hard disk password
  User hard disk password

Wireless features

• Bluetooth
• Wireless LAN

Note: The battery capacity is the typical or average capacity as measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity (see product label).

Statement on USB transfer rate

Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.

Operating environment

Maximum altitude (without pressurization)
3048 m (10 000 ft)

Temperature

• At altitudes up to 2438 m (8000 ft)
  Operating: 5°C to 35°C (41°F to 95°F)
  Storage: 5°C to 43°C (41°F to 109°F)
• At altitudes above 2438 m (8000 ft)
  Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F)

Note: When you charge the battery, its temperature must be no lower than 10°C (50°F).

Relative humidity

• Operating: 8% to 95% at wet-bulb temperature 23°C (73°F)
• Storage: 5% to 95% at wet-bulb temperature 27°C (81°F)

Avoid constant body contact with specific hot sections

CAUTION:
When the computer is operating, it should be placed on a hard and flat surface with its bottom area not in contact with user’s bare skin. Under normal operating conditions, the temperature of the bottom surface will remain within an acceptable range as defined in IEC 62368-1, but such temperatures can still be high enough to cause discomfort or harm to the user if directly touched for over one minute at a time. As such, it is recommended that users avoid prolonged direct contact with the bottom of the computer.

Chapter 2. Get started with your computer

Work with Windows
The following table contains Windows frequently used settings. You can learn the basics and start working with Windows right away.
To configure settings, type the corresponding keywords in the Windows search box and select the best match. Follow the on-screen instructions to customize settings.

Table 1. Basic settings

Table 2. Optional settings

Windows help information

If the on-screen instructions cannot solve your problem, refer to the following to get the online Windows help information.

• Type Get Help or Tips in the Windows search box and then press Enter. When the app opens, type the problem description and select the matched result.
• Visit Microsoft support Web site: https://support.microsoft.com. Enter what you are looking for in the search box and get search results.

Lenovo Vantage and Lenovo PC Manager
They are both apps developed by Lenovo. Using either of them, you can:

• View product information and system status
• Manage and change device settings
• Check for and perform system update
  Note: This feature is only available on Lenovo Vantage. In Lenovo PC Manager, you can check for and perform driver update.

Depending on the country or region in which your computer is purchased, one of the apps may be pre- installed on your computer. To open it, type its name in the Windows Search box and select the matched result. If neither of the apps is pre-installed, you may install one on your own. Lenovo Vantage is available for download free of charge from the Microsoft Store.
Note: App features are subject to change with updates and specific features may not be available on all Lenovo products.

The Novo Button menu

The Novo Button menu can be displayed before the operating system starts. From the menu, you can choose to

• Open the BIOS/UEFI setup utility
• Open the boot device selection menu
• Open the Windows startup options screen
  Note: From the Windows startup options screen, you can then choose to Start your computer using a recovery drive Reset your computer Open advanced options screen

Open the Novo Button menu

For Lenovo computers with a Novo button, you can press the button to open the Novo Button menu.
Step 1. Turn off the computer.
Step 2. Open the LCD screen and press the Novo button.
Note: Alternatively, turn off the computer. Press Fn and the power button to open the Novo Button menu.

Interact with your computer

Keyboard hotkeys
Some keys on the keyboard are printed with icons. These keys are called hotkeys and can be pressed alone or in combination with the Fn key to open certain apps or change certain settings quickly. The functions of the hotkeys are symbolized by the icons printed on them.

The FnLock switch
The FnLock is a switch that reverses the default and hidden function of a hotkey. The following table provides an example of how the FnLock switch changes the default function of the F1 key.

Note: The F1 function is application-dependent. It may have no function if the active application does not have a definition for the key.
The FnLock switch shares the ESC key (in the upper left corner of the keyboard). To turn it on or off, press Fn + ESC.

Chapter 3. Explore your computer

Manage power
Use the information in this section to achieve the best balance between performance and power efficiency.

Check the battery status
The battery status icon is in the Windows notification area. You can check the battery status, view the current power plan, and access battery settings quickly.
Click the battery status icon to display the percentage of battery power remaining and change the power mode. A warning message is displayed when the battery is low.

Charge the battery
When the remaining battery power is low, charge your battery by connecting your computer to ac power. The battery is fully charged in about two to four hours. The actual charging time depends on the battery capacity, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the battery is between 10°C (50°F) and 35°C (95°F).

Note:
You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager. To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower before it will be allowed to recharge again.

Set power button behavior

By default, pressing the power button puts the computer to sleep mode. However, you can change the power button behavior in Windows Control Panel.
Step 1. Type Control Panel in the Windows search box and then press Enter. Open the control panel and view by large or small icons.
Step 2. Select the power options and then click choose what the power button does.

A power plan

A power plan is a collection of power-saving settings made available by an operating system. With a power plan, you can set idle time-outs for different hardware components to enter a low-power state. The default power plan and some of its idle time-out settings are listed below for computer models pre-installed with Windows.
The listed settings are active when the computer is connected to an electrical outlet. If your computer include a built-in battery pack, a different collection of time-out settings is set to take effect when the computer is operating on battery power.

• Default power plan: Balanced
• Turn off the display: after 10 minutes
• Put the computer to sleep: after 10 minutes

Note: To wake the computer from the sleep state, press the power button or any key on the keyboard.

Change or customize a power plan

This operation is applicable to computers with pre-installed Windows.
Step 1. Type power plan in the Windows search box and then press Enter.
Step 2. Customize a power plan of your preference.

Set performance mode
Your computer can work in different performance modes. The performance and power consumption of the computer vary in different performance modes. Press Fn + Q to cycle through different performance modes.

Change settings in UEFI/BIOS setup utility
This section introduces what is UEFI/BIOS and the operations you can perform in its setup utility.

What is UEFI/BIOS setup utility
UEFI/BIOS is the first program that runs when a computer starts. UEFI/BIOS initializes hardware components and loads the operating system and other programs. Your computer may include a setup program (setup utility) with which you can change certain UEFI/BIOS settings.

Open the UEFI/BIOS setup utility

• Step 1. Turn on or restart the computer.
• Step 2. When the Lenovo logo appears on the screen, press F1 repeatedly.
  Note: For computers with hotkey mode enabled, press Fn + F1.

Change the startup sequence

You may need to change the startup sequence to allow the computer to start from another device or a network location.

• Step 1. Open the UEFI/BIOS setup utility.
• Step 2. Navigate to the Boot menu.
• Step 3. Follow on-screen instructions to change the order of devices under Boot Priority Order.
  Note: You can also change startup sequence temporarily without opening the setup utility. To do so, start the computer. When the Lenovo logo appears, press F12 (or Fn + F12) repeatedly.

Change hotkey mode

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Configuration ➙ Hotkey Mode and press Enter.
• Step 3: Change the setting to Disabled or Enabled.
• Step 4: Select Exit ➙ Exit Saving Changes.

Enable or disable always-on
For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled in the UEFI/BIOS setup utility.

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Configuration ➙ Always On USB and press Enter.
• Step 3: Change the setting to Disabled or Enabled.
• Step 4: Select Exit ➙ Exit Saving Changes.

Enable or disable Flip to Boot
When Flip to Boot is enabled, you can turn on the computer by flipping open the screen.

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Configuration.
• Step 3: Change the setting for Flip to Boot.
  Note: You may also set Flip to Boot in Lenovo Vantage or Lenovo PC Manager.

Set passwords in UEFI/BIOS setup utility

This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware Interface) or BIOS (Basic Input/Output System) setup utility.

Password types
You can set various types of passwords in the UEFI/BIOS setup utility.

Notes:

• All passwords set in the setup utility consist of alphanumeric characters only.
• If you start the setup utility using the user password, you can only change a few settings.

Set administrator password

You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.
Attention: If you forget the administrator password, a Lenovo authorized service personnel cannot reset your password. You must take your computer to a Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee will be charged for parts and service.

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Security ➙ Set Administrator Password and press Enter.
• Step 3: Enter a password string that contains only letters and numbers and then press Enter
• Step 4: Enter the password again and press Enter.
• Step 5: Select Exit ➙ Exit Saving Changes.

Next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator password or the user password to start the computer.

Change or remove administrator password
Only the administrator can change or remove the administrator password.

• Step 1: Open the UEFI/BIOS setup utility using the administrator password.
• Step 2: Select Security ➙ Set Administrator Password and press Enter.
• Step 3: Enter the current password.
• Step 4: In the Enter New Password text box, enter the new password.
• Step 5: In the Confirm New Password text box, enter the new password again.
  Note: If you want to remove the password, press Enter in both text boxes without entering any character.
• Step 6: Select Exit ➙ Exit Saving Changes.

If you remove the administrator password, the user password is also removed.

Set user password
You must set the administrator password before you can set the user password. The administrator of the setup utility might need to set a user password for use by others.

• Step 1: Open the UEFI/BIOS setup utility using the administrator password.
• Step 2: Select Security ➙ Set User Password and press Enter.
• Step 3: Enter a password string that contains only letters and numbers and then press Enter. The user  password must be different from the administrator password.
• Step 4: Enter the password again and press Enter.
• Step 5: Select Exit ➙ Exit Saving Changes.

Enable power-on password
If the administrator password has been set, you can enable power-on password to enforce greater security.

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Security ➙ Power on Password and press Enter.
  Note: The administrator password must be set in advance.
• Step 3: Change the setting to Enabled.
• Step 4: Select Exit ➙ Exit Saving Changes.

If power-on password is enabled, a prompt appears on the screen every time you turn on the computer. You must enter the administrator or user password to start the computer.

Set hard disk password
You can set a hard disk password in the setup utility to prevent unauthorized access to your data.
Attention: Be extremely careful when setting a hard disk password. If you forget the hard disk password, a Lenovo authorized service personnel cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee will be charged for parts and service.

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Security ➙ Set Hard Disk Password and press Enter.
  Note: If you start the setup utility using the user password, you cannot set hard disk password.
• Step 3: Follow on-screen instructions to set both master and user passwords.
  Note: The master and user hard disk passwords must be set at the same time.
• Step 4: Select Exit ➙ Exit Saving Changes.

If the hard disk password is set, you must provide the correct password to start the operating system.

Change or remove hard disk password

• Step 1: Open the UEFI/BIOS setup utility.
• Step 2: Select Security.
• Step 3: Change or remove the hard disk password.
  To change or remove master password, select Change Master Password and press Enter. Note: If you remove the master hard disk password, the user hard disk password is also removed. To change user password, select Change User Password and press Enter.
  Note: The user hard disk password cannot be removed separately.
• Step 4. Select Exit ➙ Exit Saving Changes.

Chapter 4. Help and support

Frequently asked questions

Self-help resources
Use the following self-help resources to learn more about the computer and troubleshoot problems.

What is a CRU?

Customer replaceable units (CRUs) are parts that can be upgraded or replaced by the customer. A Lenovo computer may contain the following types of CRUs:

Self-service CRU: Parts that can be installed or replaced easily by customer themselves or by trained service technicians at an additional cost.
Optional-service CRU: Parts that can be installed or replaced by customers with a greater skill level. Trained service technicians can also provide service to install or replace the parts under the type of warranty designated for the customer’s machine.

If you intend to install a CRU, Lenovo will ship the CRU to you. You might be required to return the defective part that is replaced by the CRU. When return is required: (1) return instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. For full details, see the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_02.

CRUs for your product model
The table below lists the CRUs and CRU types that are defined for your product model.

For selected models

Note: CRU replacement instruction is provided in one or more of the following publications and are available from Lenovo at any time upon your request.

• the product User Guide
• the printed publications that came with the product

Call Lenovo
If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center.

Before you contact Lenovo
Record product information and problem details before you contact Lenovo.

Note: The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover.

Lenovo Customer Support Center

During the warranty period, you can call Lenovo Customer Support Center for help.
Telephone numbers
For a list of the Lenovo Support phone numbers for your country or region, go to https://pcsupport.lenovo.com/supportphonelist.
Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.

Services available during the warranty period

• Problem determination – Trained personnel are available to assist you with determining if you have a hardware problem and deciding what action is necessary to fix the problem.
• Lenovo hardware repair – If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
• Engineering change management – Occasionally, there might be changes that are required after a product has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes (ECs) that apply to your hardware available.

Services not covered

• Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts
• Identification of software problem sources
• Configuration of UEFI/BIOS as part of an installation or upgrade
• Changes, modifications, or upgrades to device drivers
• Installation and maintenance of network operating systems (NOS)
• Installation and maintenance of programs

For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product, see “Warranty information” in the Safety and Warranty Guide that comes with your computer.

Purchase additional services
During and after the warranty period, you can purchase additional services from Lenovo at https://pcsupport.lenovo.com/warrantyupgrade.
Service availability and service name might vary by country or region.

Appendix A. Notices and trademarks

Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent programs covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.

Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

Changes are made periodically to the information herein; these changes will be incorporated in new editions of the publication. To provide better service, Lenovo reserves the right to improve and/or modify the products and software programs described in the manuals included with your computer, and the content of the manual, at any time without additional notice.
The software interface and function and hardware configuration described in the manuals included with your computer might not match exactly the actual configuration of the computer that you purchase. For the configuration of the product, refer to the related contract (if any) or product packing list, or consult the distributor for the product sales. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.

Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice.
For the latest information or any questions or comments, contact or visit the Lenovo Web site: https://support.lenovo.com

Trademarks
Lenovo and the Lenovo logo are trademarks of Lenovo. Microsoft, Windows, Windows Hello, OneDrive, Outlook, Skype, Office 365, and Cortana are trademarks of the Microsoft group of companies. DisplayPort is a trademark of the Video Electronics Standards Association. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance. USB-C is a trademark of USB Implementers Forum. All other trademarks are the property of their respective owners.