LG GV80 GENESIS Car Navigation System User Manual

GENESIS GV80
GEN6 PREMIUM CLASS NAVIGATION | SIMPLE MANUAL

Thank yOU fOR PURChASING ThIS GEN6 PREMIUM CLASS NAVIGATION.
Please scan this QR code to open the Gen6 premium class navigation web manual.

http://webmanual.genesis.com/PREM_GEN6/AVNT/JX1/EUR/English/index.html

Before using the product, read the contents of this user’s manual carefully and use this product safely.
This model is not sold to the USA, but only the Certification of LTE B7 proceeds at the request of the Applicant.

Before using the product, read the contents of this user’s manual carefully and use this product safely.
This model is not sold to the USA, but only the Certification of LTE B7 proceeds at the request of the Applicant.

HOW  TO SCAN QR COdE 

• iOS (iPhone) 

• Android (Galaxy etc.) 

PRECAUTIONS fOR SAfETy

SAfETy NOTES

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations.
To promote safety, certain functions are disabled unless the parking brake is on.
To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture.
When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside.

Do not drop it and avoid heavy impacts at any time.
The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.

NAME ANd fUNCTION Of EACh COMPONENT

HEAd UNIT

The image of this product may be different from the actual product.

1. MAP button
   •Moves to the map screen showing the current position of the vehicle.
   •When the destination is set, the voice navigation starts on the map screen.
2. NAV button
   •Moves to the navigation menu.
   • Press and hold to move to the destination search screen.
3. (Custom) button
   •Users may select and use the desired feature with this button.
   •Press and hold to move to the custom button settings screen.
4. RADIO button
   • Activates radio mode.
   •Each button press changes the mode in a sequence of DAB/FM > AM > DAB/ FM.
5. MEDIA button
   • Press this button to switch between the media menu screen and media play screen.
   •Press and hold to move to the media menu screen.
6. SETUP button
   •Moves to the settings screen.
   •Press and hold to move to the version info screen.

FRONT SEAT CONTROL KEYS
The image of this product may be different from the actual product.

1. /VOL wheel button
   •Press briefly to turn AV on/off.
   •Press and hold to turn on or off the display.
   • Turn the wheel up/down to adjust the volume.
2.  BACK button
   • Press briefly to move to the previous screen.
   • Press and hold to go to the home screen.
3. HOME button
   •Press briefly to go to the home screen.
   •Press and hold to go to the map screen.
4. TUNE button
   •Radio (DAB/FM): Turning the wheel up/down to change the searched station.
   •Radio (AM): Turning the wheel up/ down to increases/decreases the frequency by one step.
   •USB/Sounds of nature: Search for a file by turning the wheel up/down. And, when the name of the desired file is displayed, press the button to play the file.
5. MENU button
   •Displays a pop-up menu for each mode when pressed briefly.
   •Turns the split screen on and off when pressed and held.
6. Controller
   Use the controller to move and select the menu.

STEERING whEEL REMOTE CONTROL
The image of this product may be different from the actual product.

1. (Voice Recognition) button
   • When it is pressed shortly
   – Activates voice recognition mode.
   – Press and hold the button to cancel voice recognition.
   • When it is pressed and held
   – Activates voice recognition mode of the connected phone projection device.
2. (Bluetooth Call) button
   When it is pressed shortly
   • Searches a new Bluetooth phone or connects the registered phone if Bluetooth is not connected.
   • If Bluetooth is connected,
   – If selected in the call waiting screen, displays the call history screen.
   – If selected in the call history screen, makes a call to the last called number.
   – If selected in the phone entrance screen, enters the last call number.
   – If selected on the phone reception alert screen, answers the phone call.
   – If selected in the call, ends the call.
   When it is pressed and held
   • When Bluetooth is connected, if selected in Bluetooth hand-free waiting mode, redials.
   • If selected in the pop-up of calling, rejects the call.
3. +\_ button
   Turn the wheel up/down to adjust the volume.
   (MUTE) button
   Press the wheel to turn the mute on/off.
4. MODE button
   • When it is pressed shortly
   – Selects a mode from Bluetooth audio, DAB/FM, AM, USB music, USB video, phone projection or sounds of nature.
   • When it is pressed and held
   – Moves to the mode button (steering wheel) settings screen.
5. (Custom) button
   • User may select and use the desired feature with this button.
   • Press and hold to move to the custom button settings screen.
6. V\∧ button
   • When it is pressed shortly
   – Selects a preset radio station in DAB/ FM or AM mode.
   – In media mode, searches track, file, or chapter.
   • When it is pressed and held
   – In DAB/FM mode, moves previous/next station based on the currently playing station.
   – In AM mode, broadcasting is automatically searched.
   – While USB mode is activated, fast file search is available.

BASIC CONTROLS

TURNING ThE SySTEM ON
The image of this product may be different from the actual product.

1. Press the engine start button. Once the system is turned on, the booting process will start and the safety warning page is displayed.• Press [Language] to change the language of the system display.
   • Press [Driver 1], [Driver 2], or [Guest] to change the profile of the system.
2. Press [Confirm].
   NOTE
   • You cannot operate the system while it is booting up. It may take some time for all of the features of the system to boot up.
   • The safety warning page is displayed every time the ACC is turned on. The displayed warnings are related to safety, please read thoroughly and comply with the safety warnings.

TURNING ThE SySTEM Off
Press and hold [:/VOL] the wheel on the front seat control key.
To turn the system on again, press [:/VOL] the wheel on the front seat control key.
NOTE
Check the volume when turning on the system. Before turning on the system, adjust the volume to a reasonable level.
SYSTEM RESET
This feature is used to reset the system in the occurrence of an unforeseen error or problem. Press the [MAP] button and [SETUP] button for 5 seconds.

USING CONTROLLER AND TOUChPAd

Rotate the controller to the left/right or use the touchpad to switch or select the menu.

UPDATE
For supplementation of the system software, the addition of new functions, and the renewal of the map, an update is needed.

1. On the general settings screen, press [Version info].
2. After inserting the USB with the update file, press [Update].
3. The update is carried out automatically, and after completion, the system automatically reboots.

NOTE
• This product requires regular updates for software corrections, new functions, and map updates. Updating may require up to 1 hour depending on the data size.
• Turning off the power or ejecting the USB during the update process may result in update failure.

TROUBLESHOOTING

Specification