Sony DWT-B30 Digital Wireless Transmitter Instruction Manual

DWT-B30 Digital Wireless Transmitter
Instruction Manual

Before operating the unit, please read this manual thoroughly and retain it for future reference.

Usage Precautions

Notes

• Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER THE EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

If the unit is suddenly taken from a cold to a warm location, or if the ambient temperature suddenly rises, moisture may form on the outer surface of the unit and/or inside of the unit. This is known as condensation. If condensation occurs, turn off the unit and wait until the condensation clears before operating the unit. Operating the unit while condensation is present may damage the unit.
Due to the characteristics of the material used in the OLED panel, permanent burn-in or reduction in brightness may occur. These problems are not a malfunction. The life expectancy of the electrolytic capacitor is about 5 years under normal operating temperatures and normal usage (8 hours per day; 25 days per month). If usage exceeds the above normal usage frequency, the life expectancy may be reduced correspondingly.

Features

The DWT-B30 is a digital wireless transmitter for a UHF synthesized wireless microphone system to be used for broadcast or movie production purposes. This transmitter is suitable for Electronic News Gathering (ENG) and Electronic Field Production (EFP).

Using the CD-ROM manuals

The manuals can be viewed on a computer with Adobe Reader installed.
You can download Adobe Reader for free from the Adobe website.

1. Open the “index.html” file on the CD-ROM.
2. Select the language of the manual you want to view.

Note
If you damage or lose the CD-ROM, you can purchase a new one from your dealer or Sony service representative.

Specifications

General

Operating voltage:
3.0 V DC (2 x AA alkaline batteries) 5.0 V DC (USB power source)
Consumption current:
Max. 460 mA DC (at 3V DC, 25 mW antenna power)
Battery life:
Continuous operating time
6.5 hours (at 25 °C (77 °F), 10-mW output using Sony LR6 (AA)-size alkaline batteries with CODEC MODE set to MODE1 and the wireless remote control function off and DIMMER MODE set to AUTO OFF)
Operating temperature:
0 °C to 50 °C (32 °F to 122 °F)
Note: When used in locations with an ambient temperature of 45 °C (113 °F) or higher, make sure the unit does not come into direct contact with your skin, as it may cause burns due to high temperature.
Storage temperature: –20 °C to +60 °C (–4 °F to +140 °F)
Wireless remote control: 2.4-GHz IEEE802.15.4 compliant
Dimensions (unit: mm (inches)):
* L CE, H CE, UC model: 204 (8 ⅛) 90UC model: 164 (6 ½)
Mass:
Approx. 125 g (4.4 oz) Including batteries, not including microphone
Supplied accessories:
Spare battery case (1)
Soft case (1)
Microphone cable (4-pin to XLR-type 3-pin, US model only) (1)
Carrying case (1)
Scribble sheet (1)
Before Using This Unit (3)
CD-ROM (1)
Optional accessories: 
ECM-90BC, ECM-90LM, ECM-77LM, ECM-77BC/9X, ECM-66BC/9X, ECM-44BC/9X, and ECM-FT5BC lavalier microphones
Design and specifications are subject to change without notice.

WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
CAUTION
The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country.
CAUTION

• The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
• When you dispose of the battery or the product, you must obey the law in the corresponding area or country. Do not dispose of the battery or the product in a fire or a hot oven, or mechanically crush or cut the battery. It may explode or cause a fire. Do not subject the battery to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Do not place the battery in a high-temperature place, such as under direct sunlight or near a fire. It may ignite, explode, or cause a fire. Do not immerse or wet the battery in water or seawater. This may cause an electric shock.
  This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

 CAUTION
The danger of explosion if the battery is incorrectly replaced.
When the internal battery needs to be replaced, please contact a qualified service person.
The danger of fire or explosion.
When you dispose of the battery or the product, you must obey the law in the relative area or country.
Do not dispose of the battery or the product in a fire or a hot oven, or mechanically crush or cut the battery.
The danger of fire, explosion, or electric shock.
Avoid operating or storing the product in the following locations.

• Extremely hot or cold places (for operating temperature, see Installation Manual.)
• Locations where corrosive gas or flammable gas is emitted, or where salt damage may occur.

All interface cables used to connect the equipment to peripherals must be shielded type to comply with EMC standard(s) and to prevent undesired operation due to radiated emissions. When cables are supplied, always use them for this purpose.
ATTENTION
The electromagnetic fields at specific frequencies may influence the sound of this unit.
For the customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If you have any questions about this product, you may call: Sony Customer Information Service Center at 1-800-222-7669 or http://www.sony.com/

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules.

Important Notice
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and body (excluding extremities: hands, wrists, and feet).
FCC Radiation Exposure Statement
The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. DWT-B30, DWT-B30 /90 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meet the FCC radio frequency (RF) Exposure Guidelines.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Antenna type: A/4 flexible wire
Users need to register with and check a white-space database to determine available channels prior to operation at a given location.
This model contains an FCC-approved RF module.
RF Module: RM-215
Contains FCC ID: AK8RM215
In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
For DWT-B30 /90 model only
The use of Sony wireless devices is regulated by the Federal Communications Commission as described in Part 74 subpart H of the FCC regulations and users authorized thereby are required to obtain an appropriate license.
For the customers in Canada
CAN ICES-3 (B)/NMB-3(B)
For the customers in Canada,
This device complies with Industry Canada’s applicable license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Exposure of Humans to RF Fields
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/index-eng.php
The term “IC:” before the radio certification number only signifies that Industry Canada’s technical specifications were met.
This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the TV Bands.
This radio transmitter (409B-DVVTB30, 409B-DWTB3090) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type: λ/4 flexible wire, Gain: 2.14 dBi
The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. DWT-B30, DWT-B30 /90 has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
For DWT-B30 /90 model only
The Use of Sony wireless devices is regulated by the Industry Canada as described in their Radio Standard Specification RSS-123. A license is normally required. The local district office of Industry Canada should therefore be contacted. When the operation of the device is within the broadcast band, the license is issued on a no-interference, no-protection basis with respect to broadcast signals.
For the customers in Europe
Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.eu
Frequency range: 470 MHz to 714 MHz
Maximum RF power output : 25 mW e.r.p.
IEEE 802.15.4: 2,400 MHz – 2,483.5 MHz, <3 dBm e.i.r.p.
TRA
REGISTERED No: ER81066/20
DEALER No: DA0130386/14

For the customers in the U.S.A.
SONY LIMITED WARRANTY- Please visit http://www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY – Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resources-warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
For the customers in Europe
Sony Professional Solutions Europe – Standard Warranty and Exceptions on Standard Warranty.
Please visit https://pro.sony/en_GB/supportservices/warranty/support-professional-solutions-europe-standardproduct-warranty for important information and complete terms and conditions.
For the customers in Korea
SONY LIMITED WARRANTY – Please visit http://bpeng.sony.co.kr/handler/BPAS-Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

© 2019 Sony Corporation Printed in Japan
DWT-B30 flyer (GB) 5-014-890-03 (1)