HP M139-M142 Series LaserJet MFP Printer User Guide
User Guide
HP LaserJet MFP
M139-M142 series
M139-M142 Series LaserJet MFP Printer
- Remove all tapes and foam.
- Remove the cartridge from the printer.
Do not touch the roller surface. - Remove the orange guides, tape, and pull the tab to remove the protective film.
- Reinsert the cartridge and close the door.
Plug in and turn on the printer. - Open the input tray and slide out the guides. Load Letter or A4 paper and adjust the guides.
Pull open the tray extender. - Install the required HP Smart software from 123.hp.com or your app store on a computer or mobile device.
Follow instructions in HP Smart to connect the printer to a network and finish setup.*
* See Reference Guide for Wi-Fi troubleshooting and tips.
Trouble getting started? Find setup information and videos online.
App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google Inc.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries.
® Copyright 2021 HP Development Company, L.P.
Was this manual helpful?
Thank you for your feedback!