Asus RT-AX68U Dual-Band Wi-Fi RouterZ User Manual
Asus RT-AX68U Dual-Band Wi-Fi RouterZ
Package contents
- RT-AX68U Wireless Router
- Network cable (RJ-45)
- AC adapter
- Quick Start Guide
A quick look at RT-AX68U
❶ |
LAN LED |
❷ |
WAN (Internet) LED |
❸ |
5GHz LED |
❹ |
2.4GHz LED |
❺ |
Power LED |
❻ |
Power (DCIN) port |
❼ |
WPS button |
❽ |
Reset button |
❾ |
Power switch |
❿ |
USB 2.0 port |
⓫ |
USB 3.0 port |
⓬ |
WAN (Internet) port |
⓭ |
LAN 1 ~ 4 ports |
Position your wireless router
For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:
- Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
- Keep the wireless router away from metal obstructions and away from direct sunlight.
- Keep the wireless router away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss.
- Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.
- To ensure the best wireless signal, orient the four non-detachable antennas as shown in the drawing below.
NOTES:
- Use only the adapter that came with your package. Using other adapters may damage the device.
- Specifications:
DC Power adapter DC Output: +19V with 1.75A current Operating Temperature 0~40oC Storage 0~70oC Operating Humidity 0~90% Storage 0~70oC Preparing your modem
- Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.
NOTE: If you are using DSL for Internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure the router. - Connect your modem to the router with the bundled network cable.
- Power on your cable/DSL modem.
- Check your cable/DSL modem LED lights to ensure the connection is active.
Setting up your RT-AX68U
You can set up your router via wired or wireless connection.
A. Wired connection
- Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router.
- The web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.co
- Set up a password for your router to prevent unauthorized access.
B. Wireless connection
- Plug your router into a power outlet and power it on.
- Connect to the network with SSID shown on the product label on the back side of the router. For better network security, change to a unique SSID and assign a password.
2.4G Wi-Fi Name (SSID): ASUS_XX_2G 5G Wi-Fi Name (SSID): ASUS_XX_5G * XX refers to the last two digits of 2.4GHz MAC address. You can find it on the label on the back of your router.
- You can choose either the web GUI or ASUS Router app to set up your router.
a. Web GUI Setup
• Once connected, the web GUI launches automatically when you open a
web browser. If it does not auto-launch, enter http://router.asus.com.
• Set up a password for your router to prevent unauthorized access.
b. App Setup
Download ASUS Router App to set up your router via your mobile devices.
• Turn on Wi-Fi on your mobile devices and connect to your router’s network.
• Follow ASUS Router App setup instructions to complete the setup.Remembering your wireless router settings
- Remember your wireless settings as you complete the router setup.
Router Name: Password: 2.4 GHz network SSID: Password: 5GHz network SSID: Password: FAQ
- Where can I find more information about the wireless router?
- Online FAQ site: https://www.asus.com/support/faq
- Technical support site: https://www.asus.com/support
- Customer hotline: refer to the Support Hotline section in this Quick Start Guide
- You can get the user manual online at https://www.asus.com/support
- Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.
Was this manual helpful?
Thank you for your feedback!