Asus MP510 Wireless gaming mouse User Manual

ASUS MP510 Wireless gaming mouse

Package Contents

Specifications

Mouse features

  1. Right-click button
  2. Scroll wheel
  3. Forward button
  4. Backward button
  5. Left-click button
  6. Mouse feet
  7. Rubber cover
  8. DPI button
  9. Power switch
  10. Optical sensor
  11. USB dongle (Wireless receiver)/ USB

Replacing the switches

Removing the USB Dongle

Profile switching

  1. Switch to Profile 1
  2. Switch to Profile 2
  3. Switch to Profile 3

Connecting your gaming mouse

Setting up your gaming mouse as a wired mouse
Connect the bundled USB Type-C® to Type-A cable to your
gaming mouse and a USB port on your computer.
Setting up your gaming mouse as a RF wireless mouse

  1. Connect the USB dongle to a USB port on your computer.
  2. Push the power switch upwards to switch your gaming mouse on.

Battery Status
The LEDs on your gaming mouse will turn red (breathing) when the battery power is below 25% in wireless mode. You may charge your gaming mouse by using the bundled USB cable

Updating the firmware and customization

  1. Connect your gaming mouse to your computer using the bundled cable, then connect the USB dongle to a USB port.
  2. Download and install the Armoury Crate software from https://www.asus.com/Keyboards-Mice/ROG-Strix-Impact- -Wireless/HelpDesk_Download.
  3. Follow the software instructions to update your gaming mouse and dongle’s firmware.
  4. Customize your gaming mouse using Armoury Crate.

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this
Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF
THEIR POSSIBILITY.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for the connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
RF Exposure Warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions

Proper disposal

DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button DO NOT throw the device in fire. DO NOT short circuit the contacts. DO NOT disassemble the device Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

NCC: Taiwan Wireless Statement

VCCI: Japan Compliance Statement
VCCI Class B Statement

RED RF Output table

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

  • Manufacturer ASUSTek COMPUTER INC.
  • Address, City 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
  • Authorized Representative in Europe ASUS COMPUTER GmbH
  • City Address Harkortstrasse 21-23, 40880 Ratingen
  • Country Germany