Hoover PowerScrub XL Carpet and Upholstery Cleaner User Guide

POWERSCRUB™ XL
CARPET & UPHOLSTERY CLEANER
QUICK START GUIDE

GETTING STARTED

1. Attach Handle.
2. Fill Clean Water Tank with Water up to the MAX line located on side of the tank.
3. Fill Solution Bottle with HOOVER Solution and slide it into the back of the unit.

HOW TO USE: MAIN UNIT

1. Use pedals to operate.
2. Slowly Push forward and squeeze the trigger to wash. Release Trigger and slowly pull the unit back to the Dry carpet. Repeat and move to a new section.

HOW TO USE: ABOVE FLOOR

1. Hose Attachment.
2. Tool Attachment.
3. Spray / Scrub.

HOW TO USE: CLEANING AND MAINTAINING

1. Remove Dirty Water Tank.
2. Pull to Remove Nozzle Cover.
3. To Remove Brushes, press both tabs on side of the foot. To Reinsert Brushes push them back in place until you hear a click.
4. Reinsert Brushes and Press Firmly until Latches Lock.

HOW TO USE: QUICK CLEAN MODE*

1. To Engage in Quick Clean Mode, Turn Knob Counter-Clockwise until engaged.
   Return to Deep Clean Mode by Turning the knob Clockwise to Starting Position.

https://www.hoover.com/PSX002
For Frequently Asked Questions and to Register your new product, scan here!
961003500-R2