D-Link DIR-825 AC1200 Wave 2 MU MIMO WiFi EasyMesh Gigabit Router Installation Guide

DIR-825 AC1200 Wave 2 MU MIMO WiFi EasyMesh Gigabit Router

Quick Installation Guide
DIR-825

AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit Router with 3G/LTE Support and USB Port

BEFORE YOU BEGIN Delivery Package

BEFORE YOU BEGIN
Delivery Package

• Router DIR-825
• Power adapter DC 12V/1A
• Ethernet cable
• “Quick Installation Guide” (brochure).

If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are available on
D-Link website (see www.dlink.ru).
! Using a power supply with a different voltage rating than the one included
will cause damage and void the warranty for this product.

Default Settings
Domain name dlinkrouter.local.
IP address 192.168.0.1
Username (login) admin
Password admin
Name of wireless network
(SSID)
2.4GHz DIR-825
5GHz DIR-825-5G
Network key (PSK password)
see WPS PIN on the barcode
label on the bottom panel of the device

! The router DIR-825 with default settings cannot connect to the Internet. To get
started, please set your own password for access to the web-based interface and
change the WLAN name (SSID); then, if needed, configure other settings
recommended by your ISP.

Safety Rules and Conditions

Please carefully read this section before installation and connection of the device.
Make sure that the power adapter and cables are not damaged. The device should be
used only as intended in accordance with the documents.
The device is intended for use in dry, clean, dust-free, and well ventilated areas with
normal humidity away from strong heat sources. Do not use the device outdoors or in
the areas with high humidity. Do not place foreign objects on the device. Do not
obstruct the ventilation openings of the device. The environmental temperature near
the device and the temperature inside the device’s cover should be within the range
from 0 °С to +40 °С.
Only use the power adapter supplied with the device. Do not plug in the adapter, if its
case or cable are damaged. Plug the adapter only into working electrical outlets with
parameters indicated on the adapter.
Do not open the cover of the device! Unplug the device before dusting and cleaning.
Use a damp cloth to clean the device. Do not use liquid/aerosol cleaners or
magnetic/static cleaning devices. Prevent moisture getting into the device or the power
adapter.
The service life of the device is 2 years.

System Requirements and Equipment

  • An Android or iPhone mobile device (smartphone or tablet) or a computer with any operating system that supports a web browser.
  • A PC web browser to access the web-based interface of the router: Apple Safari 8 and later, Google Chrome 48 and later, Microsoft Internet Explorer 10 and later, Microsoft Edge 20.10240 and later, Mozilla Firefox 44 and later, Opera 35 and later.
  • A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
  • An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wireless network.
  • A USB modem (when it is necessary to connect to the Internet via mobile operators’ networks).1

! Your USB modem should be equipped with an active SIM card of your
operator.
For some models of USB modems, it is required to disable the PIN code check
on the SIM card prior to connecting the USB modem to the router.

Contact your operator to get information on the service coverage and fees.

CONNECTION AND CONFIGURATION

1. To connect via USB modem: connect your USB modem to the USB port2
located on the back panel of the router.
! In some cases you will need to reboot the router after connection of the USB
modem.
2. Connect the power cord to the power connector port on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
3. Connect the router to your PC.
• PC with Ethernet adapter: connect an Ethernet cable between an available
LAN port of the router and the Ethernet port of your PC. Make sure that the
Ethernet adapter of your PC is configured to obtain an IP address
automatically.
• PC with Wi-Fi adapter: make sure that the Wi-Fi adapter of your PC is on
and configured to obtain an IP address automatically. Connect to the network
DIR-825 (for operating in the 2.4GHz band) or DIR-825-5G (for
operating in the 5GHz band). Use WPS PIN from the barcode label as the
network key.
4. Start a web browser. In the address bar of the web browser, enter the IP address
of the router (by default, 192.168.0.1). Press the Enter key.
After the first access to the web-based interface you are forwarded to the start page of
the Initial Configuration Wizard.
5. Click the START button.
6. Select a language for the router’s web-based interface.
7. Click the CONTINUE button in order to configure the device with the Initial
Configuration Wizard or the ADVANCED SETTINGS button to configure all
needed setting manually.
When the web-based interface is accessed the next time and after, the login page
opens. Enter the username (admin) in the Username field and the password you
specified in the Password field, then click the LOGIN button.
For detailed description of every page of the web-based interface, see the “User
Manual” document on D-Link website (see www.dlink.ru).

2 It is recommended to use a USB extension cable to connect a USB modem to the router.

TROUBLESHOOTING

How do I reset the router to the factory default settings?
You can restore the factory default settings via the hardware RESET button located on
the back panel of the router. Use a small paperclip to activate the button; insert it into
the hole (with the device turned on), push, and hold for 10 seconds. Release the button
and wait until the router is rebooted (about a minute or two). Then access the webbased
interface (see the Default Settings section of the present document) and
configure all needed settings.

What can I do if my router is not working correctly?
Below are some steps applicable to the most common issues.
1. Check the LEDs on the top panel of the router. The POWER and INTERNET
LEDs should be solid white; the 2.4G WLAN and 5G WLAN LEDs should be
solid or blinking white (if the 2.4GHz or 5GHz wireless network
correspondingly is on and in use).
2. Make sure that all cables are connected properly.
3. Power off the router for 20 seconds, then power it on again.

Why am I unable to connect to the Internet?
Contact your ISP to make sure that the relevant service is available and that you use
correct connection settings.

TECHNICAL SUPPORT
You can find software updates and user documentation on our website.
D-Link provides its customers with free support within the product’s warranty period.
Customers can contact the technical support group by phone or by e-mail/Internet.

FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK OFFICES
WORLDWIDE VISIT
http://www.dlink.com

GPL Code Statement

This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”) or GNU
Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and
LGPL, and information on obtaining access to the GPL code and LGPL code
used in this product, are available to view the full GPL Code Statement:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL
and LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such
software, D-Link will provide upon written request via email and/or traditional
paper mail the applicable GPL and LGPL source code files via CD-ROM for a
nominal cost to cover shipping and media charges as allowed under the GPL
and LGPL.
Please direct all inquiries to:
Email:
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
14420 Myford Road, Suite 100
Irvine, CA 92606