Sharp SJ-LC41CHDAE-EU No Frost Refrigerator User Manual

Home Appliances
SJ-LC41CHDAE-EU
SJ-LC41CHDWE-EU
SJ-LC41CHDIE-EU
User Manual

Your fridge conforms to current safety requirements. Inappropriate use can lead to personal injury and damage to property. To avoid the risk of damage read this manual carefully before using your fridge for the first time. It contains important safety information on the installation, safety, use, and maintenance of your Fridge. Retain this manual for future use.
Symbol ISO 7010 W021
Warning; Risk of fire / flammable materials

CHAPTER -1:

GENERAL WARNINGS

WARNING: Keep the ventilation openings of the Fridge clear from obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process.
WARNING: Do not use other electrical appliances inside the Fridge.
WARNING: Do not damage the refrigerant circuit.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
WARNING: To avoid personal injury or damage this appliance must be installed in accordance with the manufacturer’s instructions.
The small quantity of refrigerant used in this fridge is eco-friendly R600a (an isobutene) and is flammable and explosive if ignited in enclosed conditions.
* While carrying and positioning the fridge, do not damage the cooler gas circuit.
* Do not store any containers with flammable materials, such as spray cans or fire extinguisher refill cartridges in the vicinity of the fridge.
* This appliance is intended to be used in household and similar applications such as;
– staff kitchen areas in shops, offices, and other working environments that can be equated with ordinary household
– farm houses and by clients in hotels, motels, and other residential type environments which can be equated with ordinary household
– bed and breakfast type environments which can be equated with ordinary household
– catering and similar non-retail applications which can be equated with ordinary household
* Your fridge requires a 220-240V, 50Hz mains supply. Do not use any other supply. Before connecting your fridge, ensure that the information on the data plate (voltage and connected load) matches the mains electricity supply. If in doubt, consult a qualified electrician)
* This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazard involved. Children shall not play with the appliance.
Cleaning and user maintenance, shall not be made by children without supervision.
* Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance,
very young children (0-3 years old) are not expected to use appliances, and young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction concerning use of the
appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given.
* A damaged power cord /plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel.
* This appliance is not intended for use at altitudes exceeding 2000 m.

To avoid contamination of food, please respect the following instructions:
* Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance.
* Clean regularly surfaces that can come in contact with food and accessible drainage systems.
* Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
* Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.
* One-, two- and three-star compartments are not suitable for the freezing of fresh food.
* If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.
If the water dispenser is available ;
* Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.

CHAPTER -2:

SAFETY INSTRUCTIONS

Disposal

• All packaging and materials used are environmentally friendly and recyclable. Please dispose of any packaging in an environmentally friendly manner. Consult your local council for further details.
• When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug and cable. Disable the door catch in order to prevent children from becoming trapped inside.
• A cut-off plug inserted into a 16 amp socket is a serious safety (shock) hazard. Please ensure the cut-off plug is disposed of safely.

For Denmark products:
The appliance is equipped with a plug approved in the EU ( EU-Schuko Plug) and can be used in Finland, Norway, and Sweden. In Denmark, the appliance is only approved for use with a wall outlet type E or type CEE7 // 7-S with a ground leg. If there is only wall outlet type K at the connection point, Replacing the EU-Schuko plug with the Danish plug must be performed by only authorized service personnel. Alternatively, connect a suitable and approved power adapter to transition between the Schuko plug and the Danish earth system. This adapter (min. 10 amps and up to max. 13 amps) can be ordered via a well-assorted white goods dealer or authorized electrician. Only with one of these methods, it can be ensured that the appliance is on the correct safety ground. In the absence of earthing installation, an authorized electrician should carry out an earthing installation. In the case of use without earthing installed, we will not be responsible for any loss of use that may occur.

Disposal of your old appliance
This symbol on the product or package implies that the product should not be treated as domestic waste.
Instead, it should be delivered to waste collection places recycling electrical and electronic equipment.
Recycling materials will help natural resources be preserved. For more detailed information regarding recycling of this product, please contact your local authority, domestic waste disposal service, or the shop you have purchased the product from.
Please ask your local authority about the disposal of the WEEE for reuse, recycling, and recovery purposes.

Notes:

• Please read the instruction manual carefully before installing and using your appliance. We are not responsible for the damage that occurred due to misuse.
• Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future.
• This appliance is produced to be used in homes and it can only be used in domestic environments and for specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be canceled and our company will not be responsible for the losses to occur.
• This appliance is produced to be used in houses and it is only suitable for cooling / storing foods. It is not suitable for commercial or common use and/or for storing substances except for food. Our company is not responsible for the losses to occur in the contrary case.

Safety warnings

• Do not connect your Fridge to the mains electricity supply using an extension lead.
• A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by a qualified electrician.
• Never bend the power cord excessively.
• Never touch the power cord/plug with wet hands as this could cause an electric shock.
• When the door of the cooler is closed, a vacuum seal will form. Wait for about 1 minute before reopening it.
• This application is optional for easy opening of the door.
  With this application, a little condensation may occur around this area and you may remove it.

Installation Information
Before unpacking and manoeuvering your fridge please take some time to familiarise yourself with the following points.

• Position away from direct sunlight and away from any heat source such as a radiator.
• Your appliance should be at least 50 cm away from stoves, Gas ovens, and heater cores, and should be at least 5 cm away from electrical ovens.
• Do not expose your fridge to moisture or rain.
• Your fridge should be positioned at least 20mm away from another freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do not place anything on top of your appliance.
• For safe operation, it is important that your fridge is safe and balanced. The adjustable feet are used to level your fridge. Make sure that your appliance is level before placing any foodstuffs inside it.
• We recommend that you wipe all shelving and trays with a cloth soaked in warm water mixed with a teaspoon of bicarbonate of soda before use. After cleaning rinse with warm water and dry.
• Install using the plastic distance guides, which can be found at the rear of the appliance. Turn 90 degrees (as shown in the diagram). This will keep the condenser from touching the wall.
• Your fridge should be placed against a wall with a free distance not exceeding 75 mm.

Before Using your Fridge

• Before setting up your fridge, check for any visible damage. Do not install or use your fridge if it is damaged.
• When using your fridge for the first time, keep it in an upright position for at least 3 hours before plugging it into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a slight odor when using your fridge for the first time. This is perfectly normal and will fade away as the fridge starts to cool.

CHAPTER -2:

YOUR FRIDGE

This appliance is not intended to be used as a built-in appliance.

This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.

General notes:
Fresh Food Compartment (Fridge): Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance, and shelves evenly distributed, the position of door bins does not affect energy consumption.

Front water dispenser group

CHAPTER -3:

USING YOUR FRIDGE

Information on No-Frost technology
No-frost refrigerators differ from other static refrigerators in their operating principle.
In normal refrigerators, the humidity entering the refrigerators due to opening the door and the humidity inherent in the food causes freezing in the backside of the air duct. To defrost the frost and ice in the backside of the air duct, you are periodically required to turn off the refrigerator and place the food that needs to be kept cool in a separately cooled. The situation is completely different in no-frost refrigerators. Dry and cold air is blown into the refrigerator compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost refrigerators allow you the ease of use, in addition to their huge capacity and stylish appearance.

Display and control panel
Using the Control Panel

Operating your fridge
Lighting (If available)
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests.

Super Cool Mode
Purpose

• To cool and store a large quantity of food in the fridge compartment.
• To quickly cool drinks.

How to use

• Press the decreasing button (#7 on the control panel diagram), repeatedly until the ‘Super Cool logo appears’ (#2)
• Once the Super Cool mode has been set, the machine will beep to confirm the mode has been switched on.
• After the beep, the last temperature of the fridge will appear on the screen.

During this mode:

• An economy mode cannot be selected whilst Super Cool is active.
• You can press the temperature setting increasing button (#8) to deactivate the super cooling mode.

NOTE: Depending on the ambient temperature, the super cooling mode will automatically be canceled when the fridge has reached the required temperature.

Economy Mode
Purpose
Energy savings. During periods of less frequent use (door opening) or absence from home, such as a holiday, the Eco program can provide optimum temperature whilst saving power.

How to Use

• Push the mode select button (#6 on the control panel diagram) until the ‘Eco Mode’ icon appears (#3).
• If no button is pressed for 1 second, the mode will be set.
  An economy symbol will blink 3 times.
• After the beep the fridge temperature setting (#1) will display an ‘E’.
• Economy mode symbol and E will light till mode finishes.

During this mode:

• The fridge temperature may be adjusted however the adjustment will not be made until Eco Mode is canceled.
  When the economy mode is canceled, the selected setting value will be activated and the temperature will be adjusted.
• Super Cool mode can be selected, however, by selecting mode, Eco Mode is canceled immediately.
• Eco Mode can be canceled by pressing the button (#6).

Screen Saver Mode
Purpose
This mode saves energy by switching off all control panel lighting when the panel is left inactive.

How to Use

• Screen saver mode will be activated automatically after 30 seconds.
• If you press any key while the lighting of the control panel is off, the current machine settings will reappear on the display to let you make any change you wish.
• If you do not cancel the screen saving mode or press any key for 30 seconds, the control panel will remain off.

To deactivate the screen saving mode,

• To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press and hold the Mode select button (#6) for 3 seconds.
• To active the screen saving mode, you need to press the mode button simultaneously for 3 seconds
• To reactivate screen saving mode, press and hold the Mode select button (#6) for 3 seconds.

The Child Lock Function
Purpose
Child lock can be activated to prevent any accidental or unintentional changes from being made to the appliance settings.
Activating Child Lock
Press and hold the child lock select button (#9) for 5 seconds. After the mode has been selected, the lock symbol (#5) will appear on the display.

Canceling Child Lock
Press and child lock select button (#9) for 5 seconds.
Door Open Alarm Function
If the fridge door is left open for more than 2 minutes, the appliance will beep.
Cooler Temperature Settings

• Users can use the decreasing or increasing button (#7 / #8) to set the temperature (8, 7, 6, 5, 4, 3, 2°C and Super Cool Mode).
• If Super cooling mode or Eco mode is activated, the temperature will not change until the mode is canceled.

Recommended Temperature Values for Cooler

Warnings for temperature settings

• The ambient temperature, the temperature of the freshly stored food, and how often the door is opened, affect the temperature in the refrigerator compartment. If required, change the temperature setting.
• It is not recommended that you operate your fridge in environments colder than 10°C.
• The temperature setting should be set by taking into consideration how often the fridge door is opened and closed, how much food is stored in the fridge, and the environment in which and the positioning of the appliance.
• We recommend that when first using the fridge it should be left running for 24 hours uninterrupted to ensure it is completely cooled. Do not open the fridge door, or put food inside for this period.
• A 5-minute delay function is applied to prevent damage to the compressor of your fridge when you take the plug out and then plug it back in again after a power cut after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in environments that are out of the stated temperature intervals in terms of cooling efficiency.
• This appliance is designed for use at an ambient temperature within the 10°C – 43°C range.

Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C.

Temperature indicator
In order to help you better set your refrigerator, we have equipped it with a temperature indicator located in the coldest area.
To better store the food in your refrigerator, especially in the coldest area, make sure the message “OK” appears on the temperature indicator. If « OK » does not appear, this means the temperature has not been set properly
It may be difficult to see the indicator, make sure it is properly lit. Each time the temperature setting device is changed, wait for the stabilization of the temperature inside the appliance before proceeding, if necessary, with a new temperature setting. Please change the position of the temperature setting device progressively and wait at least 12 hours before starting a new check and potential change.
NOTE: Following repeated openings (or prolonged opening) of the door or after putting fresh food into the appliance, it is normal for the indication “OK” not to appear in the temperature setting indicator. If there is an abnormal build-up of ice crystals (bottom wall of the appliance) on the refrigerator compartment, or evaporator  (overloaded appliance, high room temperature, frequent door openings), the temperature setting device on a lower position until compressor off periods are obtained again.

Store food in the coldest area of the refrigerator.
Your foods will be better stored if you put them in the most appropriate cooling area. The coldest area is just above the crisper.
The following symbol indicates the coldest area of your refrigerator.
To be sure to have a low temperature in this area, make sure the shelf is located at the level of this symbol, as shown in the illustration.
The upper limit of the coldest area is indicated by the lower side of the sticker (head of the arrow). The coldest area upper shelf must be at the same level as the arrowhead. The coldest area is below this level.
As these shelves are removable, make sure they are always at the same level with these zone limits described on the stickers, in order to guarantee temperatures in this area.

Accessories
Zero Degree Zone (In some models)
Keeping food in the Chill Drawer compartment, instead of the freezer or refrigerator compartments, allows food to retain freshness and flavor for longer while preserving its fresh appearance. When the Chill Drawer tray becomes dirty, remove it and wash with water.
(Water freezes at 0°C, but food containing salt or sugar freezes at temperatures lower than this).
The Chill Drawer compartment is usually used for storing foods such as raw fish, lightly pickled food, rice, and so on.
! Do not put the food you want to freeze or ice trays (to make ice) in the Chill Drawer compartment.

The Fresh Dial
If the crisper is full, the fresh dial located in front of the crisper should be opened. This allows the air to the crisper and the humidity rate to be controlled, to increase the life of food within.
The dial, located behind the shelf, must be opened if any condensation is seen on the glass shelf.

Adjustable Door Shelf (Adapti-Lift) (In some models)
Six different height adjustments can be made to provide storage areas that you need by adjusting the door shelf.
To change the position of the adjustable door shelf ;
Hold the bottom of the shelf and pull the buttons on the side of the door shelf direction of the arrow. (Fig.1)
Position the door shelf at the height you need by moving up and down. After you get the position that you want the door shelf, release the buttons on the side of the door shelf (Fig.2)
Before releasing the door shelf, move up down and make sure the door shelf is fixed.
Note: Before moving the door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, the door shelf could fall off the rails due to the weight. So damage may occur on the door shelf or rails.

Adjustable Glass Shelf (In some models)

The adjustable glass shelf mechanism provides higher storage spaces with a simple movement. To cover the glass shelf, push it.
You can load your food as you want in the resulting extra space. To bring the shelf in its original position, pull it toward you.

Visual and text descriptions in the accessories section may vary according to the model of your appliance.

Cleaning

• Make sure to unplug the fridge before starting to clean it.
• Do not wash your fridge by pouring water over it.
• You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.
• Remove the parts individually and clean with soapy water. Do not wash in a dishwasher.
• Never use flammable, explosive, or corrosive material like thinner, gas, or acid for cleaning.
• You should clean the condenser with a broom at least once a year in order to provide energy-saving and increase productivity.

Make sure that your fridge is unplugged while cleaning.
Replacing LED Lighting
If your fridge has LED lighting contact the Sharp help desk as this should be changed by authorized personnel only.

CHAPTER -4:

FOOD STORAGE GUIDANCE

• To reduce frost build-up never place liquids with unsealed containers in the fridge compartment.
• Allow warm or hot food to cool down before storing. This helps reduce power consumption.
• To avoid frost buildup ensure that nothing is stored touching the back wall.
• The coldest area of the refrigerator is at the bottom. We recommend using this area to store food that will perish easily, such as fish, ready meals, baked goods, or dairy products. The warmest area is the top shelf of the door.
  We recommend you store butter or cheese here.
• For normal working conditions, it will be sufficient to adjust the temperature setting of your refrigerator to +4 °C.
• The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods below 0 °C are iced and rotted, bacterial load increases above 8 °C, and spoils.
• Do not put hot food in the refrigerator immediately, wait for the temperature to pass outside. Hot foods increase the degree of your refrigerator and cause food poisoning and unnecessary spoiling of the food.
• Meat, fish, etc. should be stored in the chiller compartment of the food, and the vegetable compartment is preferred for vegetables. (if available)
• To prevent cross-contamination, meat products, and fruit vegetables are not stored together.
• Foods should be placed in the refrigerator in closed containers or covered to prevent moisture and odors.

CHAPTER -5:

DOOR REVERSAL

Repositioning the door

• It depends on which fridge you have as to whether it is possible the reverse the doors.
• It is not possible where handles are attached to the front of the appliance.
• If your model does not have handles it is possible to reverse the doors, but this needs to be completed by authorized personnel. Please call Sharp service.

CHAPTER -6:

TROUBLESHOOTING

Check Warnings;
Your fridge warns you if the temperatures for the cooler are at improper levels or when a problem occurs in the appliance.
Warning codes are displayed in the cooler indicators.

Your fridge is not operating
Check if:

• There is power
• The plug is correctly connected to the socket
• The plug or mains fuse has blown
• The socket is faulty. Examine this by plugging your fridge into a working socket.

The appliance performs poorly
Check if:

• The appliance is overloaded
• The doors are closed properly
• There is any dust on the condenser
• There is enough space near the rear and side walls.

Your fridge is operating noisily
Motor noise: Indicates the compressor is operating normally. The compressor may cause more noise for a short time when it is first activated.
Bubbling noise and splash: Due to the flow of the refrigerant in the tubes of the system.
Air blowing noise: Indicates normal operation of the system due to the circulation of air.

There is a build-up of humidity inside the cooler
Check if:

• All food is packed properly. Containers must be dry before being placed in the fridge.
• The fridge door is opened frequently. The humidity of the room enters the fridge when the doors are opened.

Humidity increases faster when the doors are opened more frequently, especially if the humidity of the room is high.
The door is not opening and closing properly
Check if:

• There is food or packaging preventing the door from closing
• The door compartments, shelves, and drawers are placed properly
• The door joints are broken or torn
• Your fridge is level.

About the water dispenser;
If the water flow is abnormal;
Check that;

• The tank is well installed.
• The tank gaskets are well assembled.

If dripping occurs;
Check that;

• The tap is well assembled.
• The tap gaskets are well assembled.

Recommendations

• In instances of power, cut and unplug the appliance. This prevents damage to the compressor. You should delay plugging in 5 – 10 minutes after you regain power supply. This will avoid damage to components.
• The cooling unit of your refrigerator is hidden in the rear wall. Therefore, water droplets or ice may occur on the rear surface of your fridge due to the operation of the compressor at specified intervals. This is normal. There is no need to perform a defrosting operation unless the ice is excessive.
• If you will not use your fridge for a long time (e.g. in the summer holidays) unplug it. Clean your fridge according to chapter cleaning and leave the door open to prevent humidity and smell.
• If the problem persists after you have followed all the instructions above, please consult an authorized service provider.

CHAPTER -7:

TIPS FOR SAVING ENERGY

1. Always allow foodstuffs to cool before storing them in the appliance.
2. Thaw food in the fridge compartment, this helps save energy.

CHAPTER -8:

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.

CHAPTER -9:

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number, and Service Index.
The information can be found on the rating plate. You can find the rating label inside the fridge zone on the left lower side.
The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model.

Visit our website to:
www.sharphomeappliances.com
Service & Support
Visit Our Website
sharphomeappliances.com
52372159
Be Original