Asus 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse Pad User Guide
Q 19545
Wireless Charging RGB Gaming Mouse Pad
Quick Start Guide
REPUBLIC OF GAMERS
Package contents
Specifications
connection | USB 2.0 |
USB Passthrough Port Wireless Charging |
1 x USB 2.0 |
Qi wireless charging | |
RGB Lighting Effects | 9 lighting effects |
Lighting Zone | 15 customizable zones |
Lighting Mode Button | Toggles between lighting profiles or brightness |
Charging Status Indicator | 1 x LED indicator |
Surface | Micro-textured hard surface |
Bottom | Non-slip rubber base |
Dimension (L x W x H) | 370 x 320 x 7.9mm |
Cable | 1 x 2-Meter braided USB Y-cable 1 x 1-Meter Qi wireless charging cable |
Operating System | Windows’ 10 |
Device features
USB 2.0 passthrough port- Micro USB DC-in port.
- Qi wireless charging status indicator
- Lighting mode button
- Qi wireless charging zone
- USB pass-through connector
- USB connector (PAD)
Getting started
To set up your ROG BALTEUS Qi Wireless Charging RGB Gaming Mouse Pad:
Connect the 1)56 connector (PAD) to an available USB port on your device.
- Connect the USB passthrough connector to an available USB port on your device.
- Connect your USB device to the U56 2.0 passthrough port on your mouse pad.
Using the Qi wireless charging function
- Connect the bundled Qi w*eless charging cable to the micro USB DC-in port and an adapter.
NOTE: We recommend using an adapter with a minimum of 5V27A power rating for optimal performance. - Plug the adapter into a 100V-240V power source.
- Place your device on the Qi wireless charging zone. Ensure that the Qi wireless charging zone is aligned with your device’s Qi charging zone.
CAUTION, DO NOT place metal objects or items containing metal, such as coins, phone cases with metallic components, or credit cards on the charging zone.
Qi wireless charging status indication
Qi wireless charging status indication
LED Status | Description |
Blue (slowly blinking) | Fully charged |
Blue (blinking) | Charging |
Blue (rapidly blinking) | Low charging efficiency |
Red (blinking) | Charging failure |
Off | Standby |
Customizing with ROG Armoury
For more lighting effects, and lighting zone configurations, download and install the ROG Armoury from
https://www.asus.com/ROG-Republic-Of-Gamers/ROG-Balteus-Qi/HelpDeskDownload/.
Ukraine Certification Logo
Service and Support
Visit our multi-language website at hlips://www.asiissom/support/.
EAC Certification Logo
.11 ur I S. IfBalt
CE Mark Warning
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/Declaration
CE RED RF Output table (Directive 2014/53/EU)
Function | Frequency | Maximum Output Power |
Wireless charger | 110 – 190 kHz | 0.266 dB |
UKCA RF Output table (The Radio Equipment Regulations 2017)
Function | Frequency | Maximum Output Power |
Wireless charger | 110 – 190 kHz | 0.266 dB |
Simplified UKCA Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (SI 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com.support/.
Manufacturer | ASUSTek COMPUTER INC. |
Address, City | 1 F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan |
Authorized Representative in Europe | ASUS COMPUTER GmbH |
Address | Harkortstrasse 21-23, 40880 Ratingen |
Country | Germany |
Authorized Representative in United Kingdom | ASUSTEK (UK) LIMITED |
Address | 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England |
Country | United Kingdom |
Proper disposal
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the wireless device is below the Industry Canada (IC) radio frequency exposure limits. The wireless device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions (antennas are greater then 20cm from a person’s body).
VCCI: Japan Compliance Statement
VCCI Class B Statement
NCC: Taiwan Wireless Statement
KC: Korea Warning Statement
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the devie only within the specific temperature range of 0°C (32°F) to 45°C (113°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1)THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csrasus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csrasus.com/encilish/Takeback.htm for detailed recycling information in different regions.
FCC COMPLIANCE INFORMATION
Responsible Party: Asus Computer International
Address: 48720 Kato Rd, Fremont, CA 94538
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : ROG Balteus Qi Model Number : NHO1
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ver. 180620