Bosch ISIO Cordless Shrub and Grass Shears Set Instruction Manual
BOSCH ISIO Cordless Shrub and Grass Shears
Safety Notes
Explanation of symbols
General Power Tool Safety Warnings
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term power tool in the warnings refers to your mainsoperated corded power tool or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs andmatching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electricshock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards.
Power tool use and care
- Do not force the power tool. Use the correct power tool for your application.
- The correct power tool will do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it on and off.
- Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Maintain power tools.
- Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
- If damaged, have the power tool repaired before use.
- Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery
pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Hedge trimmer safety warnings Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury. Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades. Hold power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool live and could give the operator an electric shock.
Shrub/Grass Shears safety warnings
This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concernin use of the machine by a perso responsible for their safety. Children should be supervised to ensure that they do not play with the machine. Never allow children or people unfamiliar with these instructions to use the machine. Local regulations may restrict the age of the operator. When not in use store the machine out of reach of children. The operator or user is responsible for accidents or hazards occurring to other people or their property. Never operate the machine while
people, especially children or pets, are nearby. Keep supply flexible cord away from cutting means. Wear eye protection and stout shoes at all times while operating the machine. Avoid trimming in bad weather conditions especially when there is a risk of lightning. Use the machine only in daylight or good artificial light. Check if guards and protective devices are undamaged and properly mounted. Before using, carry out any necessary maintenance and repairs. Switch on the motor only when the hands and feet are away from the cutting means. Always disconnect the machine from the power supply (i. e. remove the plug from the mains or remove the disabling device
- Whenever you leave the machine before clearing a blockage, before checking, cleaning or working on the machine ater striking a foreign object.
- Inspect the machine for damage and make repairs as necessary,
- If the machine starts to vibrate abnormally check immediately.
Take care against injury to feet and hands from the cutting means protect the power tool against heat, e. g., against continuous intense sunlight, fire, water,
and moisture.
Danger of explosion.
- Do not open the machine. There is danger of explosion when short-cutting the battery.
- In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints.
- The vapours can irritate the respiratory system.
- If the battery becomes defective, liquid can escape and come into contact with adjacent components.
- Check any parts concerned.
- Clean such parts or replace them, if required.
Sprayer safety warnings
Please observe safety notes and instructions of the product used with the sprayer. If advised wear garden gloves and safety goggles. Where recommended, ensure any safety equipment is worn e.g. gloves, eye protection etc. Failure to follow all instructions listed may result in serious damage/harm. Save all warnings and instructions for future reference. Keep sprayer out of reach of children. Comply with all appropriate local codes governing ventilation, fire prevention and operation. Do not eat, drink, smoke or show a naked flame while using sprayer. Thoroughly inspect the sprayer before and after use. Do not use liquids above 40 ° C, alkaline, self heating, corrosive (acid) or flammable liquids in sprayer. Do not spray any substance where hazards are not known. Do not spray yourself, animals or any other person. Keep hands and arms away from discharge. If the nozzle blocks switch off the appliance immediately. If you come into contact with chemicals, or spray accidentally enters the eyes comply with instructions given with the plant protection product and seek medical advice immediately. Always comply with the packaging label or the information supplied by the manufacturer of the plant protection product. Only spray in well-ventilated areas. Always spray downwind, away from people, animals and food preparation areas. Always spray according to the instructions on the plant protection product, taking care to avoid run off.
Safety Warnings for Battery Chargers
Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an electric shock. Do not charge other batteries. The battery charger is suitable only for charging Bosch lithium-ion batteries within the listed voltage range. Otherwise there is danger of fire and explosion.Keep the battery charger clean. Contamination can lead to danger of an electric shock. Before each use, check the battery charger, cable and plug. If damage is detected, do not use the battery charger. Never open the battery charger yourself. Have repairs performed only by a qualified technician and only using original spare parts. Damaged battery chargers, cables and plugs increase the risk of an electric shock. Do not operate the battery charger on easily inflammable surfaces e. g., paper, textiles, etc. or surroundings. The heating of the battery
charger during the charging process can pose a fire hazard. Supervise children. This will ensure that children do not play with the charger. Children or persons that owing to
their physical, sensory or mental limitations or to their lack of experience or knowledge, are not capable of securely operating the charger, may only use this charger under supervision or after havinbeen instructed by a responsible person. Otherwise, there is danger of operating errors and injuries. Products sold in GB only: Your product
is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362. If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by a authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard an should never be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only
Use a residual current device (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and understanding the operating instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the machine in a better and safer manner.
Intended Use
The garden product is intended for light trimming of shrubs and lawn edges. Your sprayer attachment has been designed to spray a range of water soluble plant protection
products such as insecti- cides, fungicides, weed killers and fertilizers. This product is for domestic use only. It is NOT intended for use with any oth- er chemical substance or for commercial or industrial use.
Technical Data
| Article number | 3 600 H33 1.. | 3 600 H33 1.. | 3 600 H33 1.. | 3 600 H33 1.. | 3 600 H33 1.. | |
| Weight according to EPTA-Procedure 01/2003 |
kg |
0.5 |
0.6 |
0.6 |
1.2 |
1.3 |
| Blade width | mm | 80 | – | – | 80 | – |
| Blade length | mm | – | 120 | – | – | 120 |
| Volume | l | – | – | 1 | – | – |
| Telescopic handle length | cm | – | – | – | 80 – 115 | 80 – 115 |
| Battery Charger | ||||||
| Article number Input voltage | EU/V~ UK/V~ AUS/V~ | 2 609 006 408/230 2 609 006 409/230 2 609 006 410/240 | ||||
| Charging current | mA | 500 | 500 | 500 | 500 | 500 |
| Allowable charging tem- perature range |
°C |
0– 45 |
0– 45 |
0– 45 |
0– 45 |
0– 45 |
| Weight according to EPTA-Procedure 01/2003 |
kg |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
| Battery | Li-Ion | Li-Ion | Li-Ion | Li-Ion | Li-Ion | |
| Rated voltage | V= | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 |
| Capacity | Ah | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Charging period battery discharged |
h |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
| Number of battery cells | 1 | 1 | 1 | 1 | 1 | |
| Run time per battery charge upto |
min |
50 |
50 |
50 |
50 |
50 |
Noise/Vibration Information
Grass Shear
Sound emission values determined according to EN 50636-2-94. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60335: ah < 2.5 m/s², K=1.5 m/s². Vibration-emission-level1)
Shrub Shear
Sound emission values determined according to EN 60745-2-15. Typically the A-weighted noise levels of the product are: Sound pressure level 58 dB(A); sound power level 79 dB (A). Uncertainty K =3 dB. Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745: ah < 2.5 m/s², K =1.5 m/s². Vibration emission level.
Sprayer
Sound emission values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 58 dB(A); sound power level 79 dB (A). Uncertainty K =3 dB. Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745: ah < 2.5 m/s2, K=1.5 m/s2. Vibration-emission-level1. The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with anoth- er. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main ap- plications of the tool. However if the tool is used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the tota working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period Identify additional safety measures to protect the operato from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. patterns.
Declaration of Conformity
Grass Shear
We declare under our sole responsibility that the product described under Technical data is in conformity with all relevant provisions of the directives 2011/65/EU, 2014/35/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60335-1, EN 50636-2-94 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
Shrub Shear
We declare under our sole responsibility that the product described under “Technical data” is in conformity with all relevant provisions of the directives 2011/65/EU, 2014/35/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745-2-15 (battery powered product),
EN 60335-1, EN 60335-2-29 battery charger 2000/14/EC: Guaranteed sound power level 82 dB(A). Conformity assessment procedure according to Annex V. Equipment category: 25
Sprayer
We declare under our sole responsibility that the product described under “Technical data” is in conformity with all relevant provisions of the directives 2011/65/EU, 2014/35/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745 (battery powered product),
EN 60335-1, EN 60335-2-29 battery charger. Technical file (2006/42/EC, 2000/14/EC) at: Bosch Lawn and Garden Ltd., PT-LG/ENS23, Stowmarket, Suffolk IP14 1EY, England.
Mounting and Operation
| Delivery Scope | 1 | 251 |
| Battery Charging | 2 | 251 |
| Attaching Tool/Detaching Tool | 3 | 251 |
| Switching On and Off | 4 | 252 |
| Fitting Telescopic handle | 5 | 252 |
| Removing Telescopic handle | 6 | 252 |
| Adjusting Handle Length | 7 | 253 |
| Setting for Edge Cutting/ Setting Handle Angle |
8 – 9 |
253 |
| Removing Wheels | 10 | 254 |
| Working Instruction Telescopic handle |
11 – 12 |
254 |
| Sprayer Application | 13 | 255 |
| Maintenance | 14 | 255 |
| Accessories | 15 | 255 |
Cutting Hedges
Before cutting check the hedge for foreign objects e. g. wire fences.
Application
To maintain control hold the machine properly by the handle. Holding the machine incorrectly could result in injury. After use replace the blade transport guard.
Telescopic handle
The telescopic handle can be used with the grass and shrub shear attachment. Before using the handle with the shrub shear attachment, the wheels should be detached.
Anti Blocking
If the blade stalls on a tough material, the load of the motor increases. The intelligent micro-electronics senses this overload condition and repeatedly reverses the motor, in order to prevent stalling and to cut the material through. This audible reversing cut action continues for up to 3 s. After cutting through, the garden product continues in its normal mode, or in case the overload condition continues the blades automatically stop in the open position e. g. in case a piece of metal fence accidentally blocks the garden product.
Battery Charge control Indication
The battery charge control indicator indicates the charging progress. During the charging process, the indicator flashes green. When the battery charge-control indicator lights up green continuously, the battery is fully charged The battery charge-control indicator indicates the charge condition of the battery for a few seconds when the On/Off switch is pressed through halfway of fully.
- Continuous lighting, green:35 – 100%
- Flashing light, green: 15 – 35
- Flashing light, red : 5 – 15
- Continuous lighting, red : 0 – 5%
Troubleshooting
Problem ,Possible Cause and Corrective Action
- Cutting time per battery charge too low Battery close to end of lifecycle.
- Battery close to end of lifecycle.
- Contact Service Agent.
- Contact Service Agent. Continuous lighting of the battery charge indicator. No charging procedure possible
- Battery pack defective.
- Contact Service Agent.
Maintenance and Cleaning
Warning
Switch off before adjusting or cleaning. The blades continue to move for a few seconds after the garden product is switched off.
Caution
Do not touch the moving blades. For safe and proper working, always keep the garden product clean. Always wear protective gloves when using, adjusting
or cleaning the garden product. Regularly check for obvious defects such as loose fixings, and worn or damaged components.
Sprayer
Spray until contents are empty. Do not store chemicals or leave residue in the appliance. Dispose of the liquid as recommended on the instructions on the plant protection product and in accordance with local regulations. To rinse the tank fill to 1/3 of its volume with clean water. Never use flammable liquids for cleaning. Do not use aggressive
or abrasive cleaning agents. Use any protective equipment recommended on the instructions of the plant protection product,e.g. gloves and goggles. Dispose of un used liquid in the appropriate manner as stated on the instructions of the plant protection product. Store the garden product in a secure, dry place out of reach of children. Do not place other objects on top of the garde product.
After sales Service and Application Service
www.bosch-garden.comIn all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product.
Great Britain
- Robert Bosch Ltd. (B.S.C.)
- P.O. Box 98
- Broadwater Park North Orbital Road Denham Uxbridge
- UB 9 5HJ
- At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
- Tel. Service: (0344) 7360109
- E-Mail:
Ireland
- Origo Ltd.
- Unit 23 Magna Drive
- Magna Business Park City West Dublin 24
- Tel. Service: (01) 4666700
- Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
- Robert Bosch Australia Pty. Ltd.
- Power Tools
- Locked Bag 66
- Clayton South VIC 3169 Customer Contact Center
Inside Australia
- Phone: (01300) 307044Fax: (01300) 307045
Inside New Zealand
- Phone: (0800) 543353
- Fax: (0800) 428570
Outside AU and NZ
- Phone: +61 3 95415555
- www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng BSC Service Centre
- 35 Roper Street, New Centre Johannesburg
- Tel.: (011) 4939375
- Fax: (011) 4930126
- E-Mail:
KZN BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown
- Tel.: (031) 7012120
- Fax: (031) 7012446
- E-Mail: b
Western Cape BSC Service Centre
- Democracy Way, Prosperity Park Milnerton
- Tel.: (021) 5512577
- Fax: (021) 5513223
- E-Mail:
Bosch Headquarters Midrand, Gauteng
- Tel.: (011) 6519600
- Fax: (011) 6519880
- E-Mail:
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The user can transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Disposal
The garden product, accessories and packaging should be sorted for environmental-friendly recycling. Do not dispose of garden products, battery chargers and batteries/
rechargeable batteries into household waste!
Only for EC countries
According to the European law 2012/19/EU, electrical and electronic equipments that are no longer usable, and according to the European law 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner Batteries no longer suitable for use can be directly returned
at
Great Britain
- Robert Bosch Ltd. (B.S.C.)
- P.O. Box 98
Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ - At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
- Tel. Service: (0344) 7360109
- E-Mail:
Integrated batteries may only be removed for disposal
Opening the housing shell can damage or destroy the garden product. When removing the battery from the garden product, actuate the On/Off switch until the battery is completely discharged. Unscrew the screw in the casing and take off the casing shell. Disconnect the connections on the battery and remove the battery.