Panasonic WJ-SX150A CCTV Switcher Instruction Manual

Panasonic WJ-SX150A CCTV Switcher

SYSTEM EXAMPLES

With optional Panasonic Digital Disk Recorder WJ-HD300A Series

With optional Single Channel Recorder

Support up to 64 Camera Systems

MATRIX SYSTEM150 PRODUCT COMPONENTS

16 Inputs Matrix Switcher WJ-SX150A

RS-485 System Controller with 3D-Joystick & Jog/Shuttle WV-CU650

RS-485 System Controller with 3D-Joystick WV-CU360CJ

Controls up to 64 cameras and 4 monitors

The Matrix System150 is compact, high in quality and cost effective

The new Panasonic Matrix System150 is ideal for small-scale surveillance applications. The Matrix Switcher can link up to 64 cameras, 4 monitors and 4 controllers. It can be
combined with our dome cameras providing excellent image quality. All of the Matrix System150’s 64 channels employ Panasonic proprietary coaxial, multiplex connectors. Video signals, control data, synchronous signals (VD2) and alarm signals all travel over a single cable, reducing the number of lines required for camera installation. Cables can be as long as 1,200 m. This System also supports remote camera control using RS-485 data. The Matrix System150 is loaded with special features including tour sequencing, alarms, video loss detection, and character displays o the monitor. All features are easy to operate using the WV-CU650 dedicated system controller. One major feature is the ease of changing system settings using menus displayed on a personal computer. Providing direct control of all device settings as well as user management features, the system administration software bundled with the Matrix System150 imposes no extra burden on system administrators. Access to vital settings data can be restricted to a specified level of user through use of User ID operator number and passwords. The Matrix System150 is ideal for schools, supermarkets, banks, parking lots, warehouses, and correctional  facilities. The Matrix System150’s small scale system simplifies operation while providing all the features required for high level surveillance.

Major Features and Functions

Camera

Supports up to 64 cameras. All 64 channels are coaxial, multiplex cables, reducing the number of cables required and simplifying installation. Supports up to 64 RS-485, remote-controlled cameras. Pan, tilt and other cameras lens motions can be controlled either by coaxial, multiplex cable or RS-485 remote-control signals. Cables can be up to 1,200 m long. The video loss detection function automatically detects camera malfunctions.

System

  • All sequence and alarm modes can be adjusted as needed.
  • User management features include operator number, password, level, and priority.
  • Personal computer screen displays simplify setup and management of alarm histories.
  • Supports up to 80 alarm inputs and four alarm outputs.

Monitor

Output supports up to 4 monitors. Character displays show date, time, camera number, camera title, and event information. Alarm history display shows up to 100 most recent alarms.

External Links

The RS-485 camera ports allow remote surveillance. The RS232C ports enable connection to personal computers or VTRs. The above all photographs were taken for the purpose of explanation; actual images may differ.

Sequencing Increases Monitoring Efficiency

Preset the sequence in which to view an image from a series of different cameras. The WV-CU650 System Controller makes it possible to choose from a variety of sequence patterns with push-button ease. Just select the one that provides the most effective coverage.

Tour Sequence

The monitor switches automatically, following a pre-set sequence from channel 1 to channel 64. Each sequence can include up to 64 steps with each step set from one to 30 seconds in length. In addition, dome cameras can also be pre-set to precisely the viewing angle you need. Up to 32 touring patterns can be stored in memory for easy recall.

Instant No Escape Alarms

Sequence mode (In response to spot alarm)
When the alarm signal is received, the monitor and camera instantly switch to the spot from which it originates. When two or more alarms are received, the system switches instantly to the spot from which the latest alarm originates. Pressing the ACK key switches operator control to the camera from which the alarm was received.

Group Sequence (Simultaneous tour sequencing)
This feature allows you to activate multiple, pre set tour sequences by pushing a single button. Each group can include up to four tour sequences. Up to four group sequences can be stored in memory.

Instant No Escape Alarms

Sequence mode (In response to spot alarm)

This feature allows you to activate multiple, pre-set tour sequences by pushing a single button. Each group can include up to four tour sequences. Up to four group sequences can be stored in memory. When the alarm signal is received, the monitor and camera instantly switch to the spot from which it originates. When two or more alarms are received, the system switches instantly to the spot from which the latest alarm originates. Pressing the ACK key switches operator control to the camera from which the alarm was received.

Hold mode (In response to spot alarm)

When the alarm signal is received, the monitor shows the image from the pre-set camera. When two or more alarms are received, the monitor continues to show the image of
the spot from which the first alarm was received. Pressing the ACK key switches operator control to the camera from which the alarm was received.

Concerning start of Sequence Alarm

The system can also be pre-set to start a tour sequence when an alarm signal is received. However, once a sequence begins, a second alarm cannot enter the monitor, as it can in sequence or hold mode.

Most recent 100 alarms display

The monitor display shows up to 100 of the most recent alarms in chronological order, allowing quick confirmation of alarm location, date, and time. Images can be recalled and reviewed with push button ease using the WV-CU650 system controller.

Alarm history management

Using a personal computer.The alarm log can be output to a personal computer using the RS232C serial port, allowing use of the personal computer to manage alarm histories.

Channels are All Transmitted via the Same Coaxial Cable

Video signals, control data, synchronous signals (VD2), and alarm signals are all transmitted over the same coaxial, multiplex cable. Use of the same cable reduces both time and trouble required for camera installation. Each coaxial cable can be up to 1,200 m long.

  • Video signal
    Transmits the image captured by the camera to the Matrix Switcher.
  • Control data
    Transmits control data from the switcher to the cameras that are compatible with Panasonic coaxial control system. Transmits alarm signal from the cameras to the switcher.
  • Synchronous signals (VD2)
    Supports almost all Panasonic CCD cameras (see compatible camera list). Allows simultaneous image switching by cameras and the Matrix Switcher, preventing image distortion.
  • Alarm signals
    Transmits alarm signals received from the camera to the Matrix Switcher, initiating the pre-set alarm event sequence.
VD2 Compatible Panasonic Camera List
B/W Camera WV-BP330 Series
Colour Camera WV-CW480 Series, WV-CW240 Series, WV-CF284/294, WV-CL930 Series, WV-CL270 Series, WV-CW380 Series, WV-CP250 Series, WV-CP280 Series, WV-CP480 Series
Integrated Dome Camera WV-CW960/970 Series, WV-CS950 Series, WV-CS570 Series

Since 1988, most of Panasonic cameras have been designed and manufactured to accept VD2 signal for system integration.

User Management Protects Against Misuse

This system manages user names and other user information for up to 16 users, who may use the controller itself or log in from a personal computer. Matrix System150 operation can be limited by use of five user attributes including operator number, password, level, priority, and the cameras the user is permitted to operate. This user management feature prevents improper use by outsiders or unauthorized persons.

OTHER CONVENIENT FEATURES

RS 485 Port
Up to 64 cameras can be controlled through the built-in RS-485 ports.

RS232C External Serial Interface
The RS232C port permits system set-up and alarm history management from a personal computer. It also supports time lapse. VTR and other peripherals.

Video Loss Detection automatically senses camera malfunction

This feature automatically senses loss of video signal input and displays a warning on the monitor, allowing speedy response to such problems as power outage,
severed camera cables or damaged cameras.

Monitor Character Displays

Four types of information are displayed on the monitor using the built in character generator IC.

  • Date and time
    Choice of five date styles and 24-hour or 12-hour time displays.
  • Camera title
    A label up to 20 characters long can be added to the camera number.
  • Monitor status
    Shows monitor number, keyboard number, and sequence status.
  • Event information
    Shows time and other information concerning alarm or timed events.

System Configuration is Simple and Trouble Free

Simple System Setup from a PC System Configuration Software is Included

Main Menu

The main menu is the heart of the System150 Setup Utility.

Logical Camera Number

Tour Sequence

This window is used to edit a tour sequence. There are 32 tour sequences available, each with up to 64 steps. Each step needs a camera number associated pan/tilt prese position and a dwell time.

Group Sequence

This window is used to edit a group sequence. There are 4 group sequences available, each with up to 4 monitors.

Timer Event

This window can be used to edit the time and type of action.

Alarm Event

This menu can be used to program which monitor will carry out the spot/tour sequence of a specific camera, when an alarm signal is input.

Operator Registration

Flexible and Compatible with a Wide Range of Equipment

The Matrix System150 can be connected to a WJ-HD300A Series Digital Disk Recorders equipped with a high-capacity hard disk drive to construct a featured-loaded system for long-duration recording of multiple types of high-quality images. The Filtered Search function supports searches using multiple date/time and camera channel criteria. The Playback VMD function instantly identifies scenes with movement, making it simple to find and playback critical scenes buried in large amounts of image data. Search results can be displayed as thumbnails.

Viewing and Recording Enhancement with WJ-SX155

Quad, 9 split screen, 16 split screen for Live or Playback. Real time refresh in live Quad screen. Minimum 2 fields switching for multiplex recoding. Camera switch input for external switching. VMD: 4 Areas, 3 Levels x 16CH.

MAJOR OPERATING CONTROLS

  • 16 Inputs Matrix Switcher; WJ-SX150A.
  • 16 Inputs Multiplexer Integrated Matrix Switcher; WJ-SX155.

SPECIFICATIONS

Model No. WJ-SX150A WJ-SX155
Power Source 220V – 240V AC, 50Hz
Camera Input 1 – 16 1.0 V[p-p]/75 W composite video signal 0.5 V[p-p]/75 W data signal and 2.5 V[p-p]/75 W vertical timing pulse multiplexed
Camera Output 1 – 16 1.0 V[p-p]/75 W composite video signal
Monitor Output 1 – 4 1.0 V[p-p]/75 W composite video signal
External Input 1.0 V[p-p]/75 W composite video signal
External Output 1.0 V[p-p]/75 W composite video signal
RS-485 Camera Port RS-485 6-conductor modular jack
Data Port RS-485 6-conductor modular jack
Alarm Port 25-pin D-sub connector
Serial Port 9-pin D-sub connector
Camera Switching Input RCA pin jack
Ambient Operating Temperature –10 °C ~ +50 °C
Ambient Operating Humidity Less than 90 %
Dimensions 420 mm (W) x 88 mm (H) x 350 mm (D)
(without rubber foot)
Weight approx 6 kg 6.5 kg
RS-485 System Controller with 3D-Joystick & Jog/Shuttle; WV-CU650 
Power Source 9 V DC, 300 mA (using the supplied AC adapter)
Power Source (supplied AC adapter) 230 V AC, 50 Hz, 150 mA
Data Output/Input Port 6-conductor modular jack
(RS-485, Full duplex) x2
Serial Port 9-pin D-sub connector
Controller Number 1 to 8 (rotary switch)
Ambient Operating Temperature –10 °C ~ +50 °C
Monitor Number Selection 1 to 4
Camera Number Selection Up to 64
Dimensions (W x H x D) Main Unit: 290 x 111 x 221 mm
3D Joystick Unit: 134 x 146 x 218 mm
Weight (without the AC adapter) Main Unit: 1.3 kg
3D Joystick Unit: 0.8 kg

APPEARANCE

WJ-SX150A WJ-SX155

WV-CU650