Sharp GX-BT480 Bluetooth Speaker User Manual

SHARP GX-BT480 Bluetooth Speaker User Manual

Thank you for choosing the SHARP product.

Important safety instructions

Please, read these safety instructions and respect the following warnings before the appliance is operated:

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.

In order to prevent fire always keep candles and other open flames away from this product.

WARNING – PROTECT YOUR HEARING
SHARP DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS. PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL). TURN OFF THE POWER TOYOUR DEVICE WHEN NOT IN USE.

Please ensure that the device and any associated components such as ear gels or chargers are stored safely and that any packaging or unwanted contents are disposed of thoughtfully. Do not place the product on the floor or leave it in a place where young children could access it, or someone could trip over it.

Smart Practices While Driving

Check the laws and regulations on the use of mobile devices and accessories such as your SHARP device in the areas where you drive. Always obey them.

DO NOT USE MOBILE DEVICES AND ACCESSORIES IN AREASWHERE THEIR USE IS PROHIBITED. ENSURE THAT YOUR USE COMPLIES WITH ANY RESTRICTIONS.

• Your SHARP device lets you communicate by voice when wireless service is available and safe conditions allow.
• When driving a car, driving is your first responsibility.
• If you choose to use your Bluetooth device while driving, remember the following tips:
• Get to know your SHARP device and its features such as speed dial and redial. These features help you to place your call without taking your attention off the road.
• If you receive an incoming call at an inconvenient time, let your voice mail answer it for you.
• Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and heavy traffic can be hazardous.
• Do not take notes or look up phone numbers while driving. Remember that your primary responsibility is driving safely.
• Do not engage in stressful or emotional conversations that may be distracting.
• Make people you are talking to aware you are driving and suspend conversations that can divert your attention away from the road.
• In the case of fire, traffic accidents, medical or other serious emergencies, dial the local emergency number.
• Call roadside assistance or a special non-emergency wireless assistance number when necessary.

Care and Handling

Your SHARP Bluetooth device is a precision engineered instrument. To ensure its ongoing performance, you should look after it as you would
any quality consumer electronic product, and use it in accordance with the instructions.

SHARP recommends that you take the following precautions.

• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day.
• Remember that on a hot day the temperature inside a closed car may be significantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area where the temperature is likely to drop below 0 degrees Centigrade (32 degrees Fahrenheit).
• Do not leave your device, or use your device, in any area exposed to humidity, dust, soot, other foreign objects, smoke, or steam as this may cause your device to malfunction.
• Do not use any household or industrial grade detergents or cleaners to clean your device. If your device becomes dirty or smeared, in most instances a wipe with a dry or slightly damp cloth should be sufficient to clean it.
• Do not leave your Bluetooth device plugged into a wall or carcharge
  for long periods after it is fully charged. SHARP does not recommend long periods of continued charging.
• Before charging your SHARP device, make sure that the AC outlet, adaptor and cable are not damaged. If you notice any abnormalities, seek advice from a qualified professional.
• If traveling internationally, ensure that your SHARP wall or car power adapter is approved for use in the country where you plan to use it and hat the adapter voltage is suited to the local power supply.
• Should a fault develop with your SHARP product, contact SHARP for advice on how to proceed.
• Do not attempt to repair or alter any SHARP product yourself.

Approved Accessories

The use of accessories not approved by SHARP, including but not limited to batteries, antennas, wall adapters, car chargers, ear gels and foam tips and convertible covers, may cause your SHARP device to malfunction or in the case of non-approved electrical accessories may cause the device to exceed RF energy exposure guidelines.
Use of non approved accessories will void your device’s warranty.

Electromagnetic Interference

Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, electromagnetic configured for electromagnetic compatibility. Similar to a mobile phone, your SHARP device is a low power transmitter / receiver and is covered by regulations pertaining to such devices. Turn off your SHARP device in
any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.

• When instructed to do so, turn off your SHARP device when on board an aircraft. Any use of a mobile device must be in accordance with applicable laws, regulations and airline crew instructions.
• Some Bluetooth devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.
• If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your doctor or physician may be able to assist you in obtaining this information.
• If you are in doubt about whether your SHARP device be safely turned on or used, please consult an authorized person in the location you want to use your SHARP device. If no authorized person is available or you remain uncertain, SHARP recommends that you turn off your Bluetooth device and any mobile phones unless they are required in an emergency situation.

Power Adapter

• To disconnect the unit from the mains supply, unplug the lead from the mains socket.
• Only use the supplied mains adaptor as failure to do this may result in a safety risk and/or damage to the unit.

How to remove the battery for disposal

RISK OF INJURY. WEAR GLOVES WHEN WORKING!

The battery should be removed by an authorized Sharp service centre. Not doing so will invalidate any guarantees and warranties on your device.

1. Use a flat screwdriver to gently prise away the fabric cover.
2. Pull the silicon cover aside to show the screws underneath.
3. Unscrew the two sides metal hook
4. Unscrew the left end cap (four screw)
5. Unscrew the right end cap (four screw)
6. Remove the top plastic cover by taking out the four retaining screws.
7. Peel off the button silicon when the plastic cover has been removed.
8. Now remove the remaining screws holding the two halves of the product together
9. Remove the screws holding the battery in place.
10. Disconnect the battery connector from the board.
11. Remove the battery.

Disposal of this equipment

• Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE in accordance with local law. By doing so, you will help to conserve resources and protect the environment.
  
• The shown above appears on electrical and electronical equipment (or the packaging) to remind users of this.
• Users are requested to use existing return facilities for used equipment and batteries.

CE Statement:

Hereby, UMC Poland sp. z o.o. declares that this audio device is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available by following the link http://www.sharpconsumer.eu/documents-of-conformity/

What is included in the box

• 1 x Main unit GX-BT480
• 1 x USB Cable
• 1 x AUX In Cable
• 1 x AC charger
• 1 x Carry Strap
• 1 x User manual

Panels & Controls

Buttons

1. Power – short press to power on/off
2. M Mode – click to change modes
3. EQ – Click to change EQ
4. >> Skip forward – Click to skip
5. << Skip backward – Click to skip
6. Light Indicator
7. Battery Indicator
8. Volume down – Single click or hold
9. ► Play/Pause – Click to play/pause, Double Click for SIRI/GOOGLE. Click to answer/end, Double Click to reject call.
10. Volume up – Single click or hold
    Behind the port cover
    
11. MicroUSB Charge slot – please use supplied AC charger and USB cable, charge time up to 3.5 hours.
12. Micro SD card slot – up to 32GB card supported MP3, WAV, APE, FLAC audio formats, card sold separately
13. Aux in Jack 3.5mm – Aux in cable supplied
14. Carry strap hooks for use with supplied carry strap.

Getting started

Power on/off
Short press button to power on/off the speaker.
The indicator light will flash blue. The speaker has a memory function and when powered will enter the same mode as prior to power off. Each time the speaker powers on it will reset to 25% volume.
After 10 mins with no activity/connection the GX-BT480 will automatically power off to conserve battery.

Charging
Please use supplied AC charger and USB cable to charge the GXBT480. A full charge will take around 3.5 hours. Please close the port cover after you have charged the GX-BT480.

Modes

Bluetooth Mode

• A. Pairing
  Power on the speaker and enter Bluetooth mode. The light indicator will flash. On your smartphone search Bluetooth devices for the “SHARP GX-BT480”. Once connected the speaker will announce it is “connected” and the indicator light will cease flashing.
• B. Music
  ► Click to play/pause
  << Click for previous track
  – Click to decrease volume
  + Click to increase volume
• C. Calls
  ► Click to answer an incoming call
  ► Click to end the active call
  ► Double click to reject an incoming call
• D. SIRI/GOOGLE
  ► Double click to activate/cancel Siri/Google voice dialing.
• E. Disconnect
  ► Press and hold to disconnect the current Bluetooth connection. The GX-BT480 will prompt “disconnected”. Then other Bluetooth devices can find and pair with the GX-BT480.

Duo Mode

Dual speaker wireless stereo pairing for wide stereo sound stage.

1. Press the power button on the first speaker to turn the speaker “On”
2. Press and hold the M (mode) button on the first speaker until the speaker says “Duo Mode pairing” then release the buttons
3. Press the power button on the second speaker to turn the speaker “On”
4. Press and hold the M (mode) button on the second speaker until the speaker says “Duo Mode pairing” then release the buttons.
5. Please wait until one speaker says “Duo Mode connected”. This may take up to 1 minute. The speakers are now connected to each other.
   The speaker that says “Duo Mode connected” is the master speaker and this is the speaker that you should pair with your phone.

For Bluetooth pairing to a Bluetooth-out enabled smart device search for “GX-BT480” on your device and pair.
If you receive a phone call while in Duo Mode the call will only comethrough the master speaker. When in Duo Mode and you Power off one speaker both speakers will power off.
When you Power on the speakers, they need to be turned on individually. When both speakers are powered on Duo Mode will automatically reconnect and you will hear“Duo Mode connected”.
To disconnect Duo Mode press and hold the M (mode) button on one speaker until you hear “Duo Mode disconnected”.
To clear Duo Mode pairing press and hold the M (mode) button on one speaker until the speaker says “Duo Mode cleared”. This takes about 8 seconds.

Assuming direct line of sight, you should achieve be able to achieve a range of over 40 metres between the two speakers. When used indoors, the range will be affected by any internal walls or obstacles between the speakers.

Micro SD Card Mode

When you insert a Micro SD Card into the GX-BT480 it will switch to Micro SD card playback and announce memory card playback. Please press the play button to commence playing music from the card.
Please note the GX-BT480 supports Micro SD cards upto 32GB, FAT32 format and MP3, WAV, APE, FLAC audio formats. If you wish to switch modes please press the button.

1. ► Click to play/pause
2. << Click for previous track
3. >> Click for next track
4. − Click to decrease volume
5. + Click to increase volume

Notes:

• Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played
• Even when the files are in a supported format (MP3), some may not play or display depending on the compatibility.
• In some case, reading may be as long as 60 seconds, this is not a malfunction.
• Depending on the amount of data and media speed, it may take longer for the unit to read the USB device.

Aux in Mode

Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). Short press the button to enter “AUX IN” mode (the speaker will prompt “Aux in” mode).
The speaker will play the music from the audio source.

• ► Click to mute play back
• − Click to decrease volume
• + Click to increase volume

To change or control tracks please use your music source when in Aux in mode.

EQ

The GX-BT480 features three different EQs: Standard, Bass Boost, Movies.
EQ – Click to change EQ settings.
The default EQ is Standard EQ. This is for use when music is already very Bass heavy and you need to pull it back a bit. Standard EQ is the loudest option. Bass Boost EQ will enhance the level of bass. Movie EQ enables using the GX-BT480 as a soundbar with low latency playback and the ability to hear the dialogue and all the action without compromise.

Dimensions

Contact Us

Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.
Google Now is a trademark of Google Inc., Siri is a trademark of Apple Inc., registered in the U.S. and other countries.

UMC Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice,
Poland
Made in China

SAU/MAN/0074
www.sharpconsumer.eu