Bosch AL 2215 CV Li-Ion Quick Charger Instruction Manual
Li-Ion Quick Charger
Original instructions
Product Description and Specifications
Save these instructions.
Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions.
Safety Notes
- This charger is not intended for use by children and persons with physical, sensory, or mental limitations or a lack of experience or knowledge. This charger can be used by children aged 8 and above and by persons who have physical, sensory, or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the charger and they understand the associated dangers. Otherwise, there is a danger of operating errors and injuries.
- Supervise children during use, cleaning, and maintenance. This will ensure that children do not play with the charger.
- Only charge Bosch lithium-ion batteries with a capacity of 1,0 Ah or more (4 battery cells or more). The battery voltage must match the battery charging voltage of the charger. Do not charge non-rechargeable batteries. Otherwise, there is a danger of fire and explosion.
- Keep the battery charger clean. Contamination can lead to the danger of an electric shock.
- Before each use, check the battery charger, cable, and plug. If damage is detected, do not use the battery charger. Never open the battery charger yourself. Have repairs performed only by a qualified technician and only using original spare parts. Damaged battery chargers, cables, and plugs increase the risk of an electric shock.
- Do not operate the battery charger on easily inflammable surfaces (e. g., paper, textiles, etc.) or surroundings. The heating of the battery charger during the charging process can pose a fire hazard.
- In case of damage and improper use of the battery, vapors may be emitted. Ventilate the area and seek medical help in case of complaints. The vapors can irritate the respiratory system.
- Do not cover the ventilation slots of the battery charger. Otherwise, the battery charger can overheat and no longer operate properly.
Product Features
The numbering of the product features refers to the illustration of the battery charger on the graphics page.
- Battery pack*
- Green battery charge indicator *
Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.
Technical Data
Battery Charger |
AL 2215 CV | |
| Article number | 2 607 225 4.. | |
| Battery charging voltage (automatic voltage detection) | V |
14.4 – 21.6 |
| Charging current | mA | 1500 |
| Allowable charging temperature range | °C | 0 – 45 |
| Charging time for battery capacity, approx. – 1.0 Ah – 1.3 Ah – 1.5 Ah – 2.0 Ah |
min min min min |
100 % 45 55 63 85 |
| Number of battery cells | 4 – 6 | |
| Weight according to EPTA Procedure 01:2014 | kg | 0.40 |
| Protection class |
Operation
Starting Operation
- Observe the mains voltage! The voltage of the power supply must correspond with the data given on the nameplate of the battery charger. Battery chargers marked with 230 V can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the main plug of the battery charger is inserted into the socket and battery 1 or the power tool with the slid-on battery 1 is inserted into the battery charger. The power tool cannot be switched on during charging.
Firstly, place battery 1 as shown in the figure onto the front of the battery charger (1) and then press battery 1 down at the rear (2). To remove the battery, proceed in reverse order.
Due to the intelligent charging method, the charging condition of the battery is automatically detected and the battery is charged with the optimum charging current, depending on battery temperature and voltage.
This gives longer life to the battery and always leaves it fully charged when kept in the charger for storage.
Note: The charging procedure is only possible when the battery temperature is within the allowable charging temperature range, see “Technical Data” section.
Meaning of the Indication Elements
Flashing Battery Charge Indicator 2
Continuous Lighting of the Battery Charge Indicator 2
When the battery is not inserted, continuous lighting of the battery charge indicator 2 indicates that the main plug is inserted in the socket and that the battery charger is ready for operation.
Troubleshooting
Causes and Corrective Measures
| Cause | Corrective Measure |
| Continuous lighting of the battery charge indicator 2 No charging procedure possible | |
| Battery not (properly) inserted | Properly insert the battery into the battery charger |
| Battery contacts contaminated | Clean the battery contacts (e.g. by inserting and removing the battery several times) or replace the battery |
| Battery pack defective | Replace the battery |
| Battery charge indicator 2 does not light up | |
| The mains plug of the battery charger is not plugged in (properly) | Insert the mains plug (fully) into the socket-outlet |
| Socket outlet, mains cable, or battery charger defective | Check the mains voltage; have the battery charger checked by an authorized after-sales service agent for Bosch power tools |
Working Advice
With continuous or several repetitive charging cycles without interruption, the charger can warm up. This is not meaningful and does not indicate a technical defect of the battery charger.
A significantly reduced working period after charging indicates that the battery is used and must be replaced.
Maintenance and Service
Maintenance and Cleaning
If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found at: www.bosch-pt.com
Bosch’s application service team will gladly answer questions concerning our products and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of the product.
| Great Britain
Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: (0344) 7360109 E-Mail: |
Ireland
Origo Ltd. Unit 23 Magna Drive Magna Business Park City West Dublin 24 Tel. Service: (01) 4666700 Fax: (01) 4666888 |
| Australia, New Zealand, and Pacific Islands
Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169 Customer Contact Center Inside Australia: Phone: (01300) 307044 Fax: (01300) 307045 Inside New Zealand: Phone: (0800) 543353 Fax: (0800) 428570 Outside AU and NZ: Phone: +61 3 95415555 www.bosch.com.au | |
Republic of South Africa Customer service
Hotline: (011) 6519600
| Gauteng – BSC Service Centre
35 Roper Street, New Centre Johannesburg Tel.: (011) 4939375 Fax: (011) 4930126 E-Mail: [email protected] |
KZN – BSC Service Centre
Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: (031) 7012120 Fax: (031) 7012446 E-Mail: [email protected] |
| Western Cape – BSC Service Centre
Democracy Way, Prosperity Park Milnerton Tel.: (021) 5512577 Fax: (021) 5513223 E-Mail: [email protected] |
Bosch Headquarters
Midrand, Gauteng Tel.: (011) 6519600 Fax: (011) 6519880 E-Mail: [email protected] |
Disposal
Battery chargers, accessories, and packaging should be sorted for environmental-friendly recycling.
Do not dispose of battery chargers into household waste!
Only for EC countries:
Subject to change without notice.
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 3V5 (2017.03) O / 77
Bosch Power Tools
1 609 92A 3V5 | (15.3.17)
