Motorola XTS Bluetooth Adapter and Remote PTT Kit Instruction Manual
AIR PRO WIRELESS
MOTOROLA XTS BLUETOOTH ADAPTER & REMOTE PTT KIT FOR WIRELESS EARBUDS
AIR PRO WIRELESS PTT COMBO KIT FOR MOTOROLA XTS INCLUDES:
USE WITH ALL YOUR FAVORITE WIRELESS EARBUD BRANDS. Wireless Earbuds Not Included.
PAIRING INSTRUCTIONS:
- Pairing Earbuds to the Bluetooth Radio Adapter (BTD). Attach the Bluetooth Adapter to the radio. Power up the radio. Bluetooth adapter LED will flash blue/red. Now it’s in a pairing state. Power up your Bluetooth earbuds and put them into a pairing state. When the radio adapter LED is solid blue, the pairing is complete. Power down the radio & earbuds. Check your personal earbud instructions for manual pairing.
- Pairing BTR Bluetooth Remote Switch to Bluetooth Radio Adapter (BTD). With the radio off, hold down the PTT button on the radio adapter making sure not to completely cover the LED. While holding down, turn on the radio at the same time until LED is flashing Blue/Red then release. Short press again then release. The LED will flash slow Blue/Red. Now the radio adapter is in a pairing state. Next, press & hold the PH button on the remote switch until LED is flashing Blue/Red then release. When LED on the radio adapter turns blue, the pairing is complete. Now power up earbuds. Wait about 15 seconds for everything to link up. Now you are ready to transmit.
Next time you use the Air Pro Wireless, power up the radio & earbuds. Earbuds will automatically link to the adapter. Press & hold the BTR PTT Button until LED appears, then release. The BTR will now link in about 10 seconds.
To pair additional earbuds, follow *Manual Pairing instructions in the “Notes”.
* NOTES:
▶ To power down BTR, press and hold the PTT button until LED turns RED. If all devices are powered off the remote switch will automatically power down in 5 minutes.
If no LED appears on the BTR when trying to pair, connect the USB cable to charge for about 10 minutes, then try again. For all-day use, BTR should charge for about 3.5 hours.
▶ If Bluetooth Radio Adapter (BTD) did not flash Blue/Red during start-up, *Manual Pairing will be required. Hold down the pairing button on the adapter & turn the radio on at the same time until a Blue / Red LED appears. Then proceed to start from Step 1 to complete the pairing process.
▶ Earbuds can be activated from the pairing button on the BTD radio adapter as well.
▶ LED automatically shuts off after 15 seconds.
MANUFACTURER’S LIMITED WARRANTY
Your Sales Receipt is required to validate & obtain warranty services. Your Nighthawk is warranted against internal defects in material or workmanship. All of our earphones are warranted for 12 months. Hygiene restrictions prevent us from extending our limited warranty to wearable parts such as Fin Ultra ear tips, earmolds, clear tubes & ear inserts. The warranty is extended to the original purchaser only and does not cover the following:
- Physical abuse
- Improper maintenance of the unit
- Damage from tugging or pulling
- Frayed, torn, or exposed wires
- Crushing or smashing in any way, shape, or form General misuse of the item such as Excessive voltage, tampering with the unit, or repairs attempted by someone other than the manufacturer will void the MANUFACTURER’S LIMITED WARRANTY.
The manufacturer reserves the right to evaluate & refuse a warranty based on their evaluation. In order to obtain warranty services, proof of purchase must be returned along with the product.
For Returns Dept. & Return Authorization 0 Call Toll Free: (888) 372-1888. After calling, send your return along with your name address & Return Authorization number to
The Earphone Connection, Inc.
25139 Avenue Stanford
Valencia, CA 91355
Visit our YouTube Channel: EPC Headsets for videos about Pairing the Air Pro Wireless PTT Combo Kit.
888.372.1888
www.earphoneconnect.com
25139 Avenue Stanford
Valencia, CA 91355