Honeywell High Performance Printer PX6ie User Guide
Honeywell High Performance Printer PX6ie
Install Printer Media and Ribbon
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
This step is only required for thermal transfer configurations. For direct thermal configuration, skip to Step 6.
Install ribbon according to coated side.
- Coated Side In (CSI)
- Coated Side Out (CSO)
Step 6:
Direct Thermal Configuration
Thermal Transfer Configuration
Step 7:
Direct Thermal Configuration
Thermal Transfer Configuration
Step 8:
Step 9:
- Electrical rating: ~ 100-240 V, 3-1,5 A 50/60 Hz
- Media and ribbon are sold separately.
Support
To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com
Documentation
Product documentation is available at www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.