Maytag Top Loading Washing Machine User Guide

MAYTAG Top Loading Washing Machine User Guide

QUICK REFERENCE GUIDE
MAYTAG® TOP LOADING WASHING MACHINE

CONTROL PANEL AND FEATURES

  1. POWER
    Touch to turn on/off or to stop/cancel a cycle.
  2. CYCLE KNOB
    Turn knob to select desired cycle.
    EXTRA POWER
    Press to boost stain fighting on selected cycle.
  3. DISPLAY LCD
    The display shows the time required for the cycle to complete. Factors such as load size and water pressure may affect the time shown in the display. Tightly packed loads, unbalanced loads, or excessive suds may cause the washer to adjust cycle time as well.
    ADD GARMENT
    When Add Garment is lit, you may open the lid, which automatically pauses the cycle, and add items. To resume, close the lid and hold the START/PAUSE button to start the washer again.
  4. START/PAUSE
    Touch and hold the START/PAUSE button to start cycle. Touch during a cycle to pause cycle and unlock lid.
    NOTE: If machine is spinning it may take longer to unlock lid.
  5. CYCLE MODIFIERS (Not all modifiers are available on all cycles)
    SPIN
    Touch to modify the cycle’s available spin speeds (Off, Medium, Fast).
    TEMP
    Touch to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, Hot).
    SOIL
    Touch to modify the cycle’s available soil levels. Increase soil level for heavily soiled items and decrease soil level for lightly soiled items (Extra Light, Light, Normal, Heavy, Extra Heavy).
  6. CYCLE OPTIONS (Not all options are available on all cycles).
    DEEP FILL
    Touch to add more water to the washer from the cycle’s auto sensed level (Auto, Medium, High, Max Fill).
    REMOTE ENABLE
    Touch each time you want to remotely control via the MaytagTM app. Follow the instructions in the “GET THE MAYTAGTM APP AND GET CONNECTED” section below for more details. Opening the lid cancels “Remote Enable”.
    FABRIC SOFTENER
    Touch to let the machine know when you have added fabric softener to the dispenser drawer.
    DELAY START
    Touch to delay the start of the wash cycle for up to 12 hours.
    EXTRA RINSE
    Touch to automatically add a second rinse available on most cycles.
    CYCLE SIGNAL
    Touch to turn the end of cycle signal on/off and adjust the tone volume when a button is touched.

W11445525A

*NOTE: Not all cycles, settings or options are available with all models.

Loading Recommendation

For best performance, it is recommended to load items by dropping them in loose heaps evenly around the washplate and agitator. Do not lay items length-wise around the washplate or agitator.

More Water When You Want It

AUTO SENSING & DEEP FILL

  • The washer will adjust the water level to the optimal amount for a High Efficiency wash of the detected load size.
  • Touch “DEEP FILL” to add more water to the wash load.
  • There are four levels of deep water “Auto”, “Medium”, “High”, “Max Fill”.
  • Not all levels available on all cycles.

Cleaning with Less Water

As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal, and does not indicate that more items should be added.

IMPORTANT: You will not see a washer basket full of water as with your past agitator-style washer. It is normal for some of the load to be above the water line.

Boost Stain Fighting (on selected cycles)

EXTRA POWER Option

  • Press the knob to select EXTRA POWER.
  • When Extra Power is active the cycle control knob will illuminate.
  • Extra Power will increase cleaning power in the cycle selected.

Rinsing Before Running a Wash Cycle

WATER FAUCET OPERATION

  • Press the faucet button once to turn on.
  • To turn the faucet off press the button again.
  • Faucet will automatically shut off after 10 minutes or when max water level is reached.
  • Water will automatically drain if water level becomes too high or if the lid is left open for 10 minutes.

CYCLE GUIDE

Settings shown are selectable for that cycle. Factory default settings are shown in Bold. Once you select a cycle, the default modifiers or the previous set modifiers for that cycle will be shown in the Display LCD. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models. Please refer to garment label instructions for best care.

GET THE MAYTAGTM APP AND GET CONNECTED

With your mobile device download the MaytagTM app. You can get subscription and connectivity instructions, terms or use, and privacy policy at www.maytag.com/connect or in Canada www.maytag.ca/connectada www.maytag.ca/connect.

Once installed, launch the app and you will be guided through the steps to subscribe and create your user account to connect to your appliance. If you have any problems or questions, call Maytag® Connected Appliances at 1-866-333-4591.

WASHER ICONS

NOTE: Not all features and options are available on all models.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For detailed installation instructions and maintenance information, winter storage and transportation, please see the INSTALLATION AND CARE INSTRUCTIONS MANUAL included with your machine. For detailed product dimensions, please see the DIMENSION GUIDE that can be found at www.maytag.com/owners or in Canada www.maytag.ca/owners.

For information on any of the following items please visit www.maytag.com/owners or in Canada www.maytag.ca/owners. This may save you the cost of a service call.

® / TM ©2020 All rights reserved.