JVC Monitor With Receiver User Guide

Monitor With Receiver

KW-M560BT
MONITOR WITH RECEIVER
Quick Start Guide
ÉCRAN AVEC RÉCEPTEUR
Guide de démarrage rapide
MONITOR MIT EMPFÄNGER
Kurzanleitung
MONITOR MET ONTVANGER
Snelstartgids

· Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from
· Des informations actualisées (le dernier mode d’emploi, les mises à jour du système, les nouvelles fonctions, etc.) sont disponibles sur
· Die aktuellsten Informationen (die neueste Bedienungsanleitung, Systemupdates, neue Funktionen usw.) finden Sie unter
· Bijgewerkte informatie (de meest recente gebruiksaanwijzing, systeemupdates, nieuwe functies, enz.) is beschikbaar op
<https://www.jvc.net/cs/car/>

Model name indication position See Removing the trim plate (P.24)
Position d’indication du nom du modèle Voir Retrait de la plaque de garniture (p.50)
Trim plate Plaque de garniture
Ziertafel Afwerkingsplaat

Anzeigeposition der Modellbezeichnung Siehe Entfernen der Ziertafel (S.76)
Model naam indicatie positie Zie Verwijderen van de afwerkingsplaat (P.102)

B5H-0357-04 (E)

Important Notice on Software
Ñ Software License on This Product
The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties. The EULA dictates the availability of the source codes of free-software components as a prerequisite to distributing them in executable form under the terms of the GNU General Public License or the Lesser General Public License (hereinafter called “GPL/LGPL”). To get information about the software components that are subject to the terms of the GPL/LGPL, please visit the following Website:
Website URL https://www3.jvckenwood.com/english/download/gpl/
Queries concerning the contents of the source code or the like will not be accepted. Please note that software components based on a EULA that is not subject to the terms of the GPL/LGPL or those that have been developed or created by JVCKENWOOD Corporation will be excluded from the scope of source code disclosure. Because licenses to use software components distributed under the GPL/LGPL are offered to the customers for free of charge, no warranty is granted to the customers, whether explicitly or implicitly, to the extent of the applicable laws. Unless otherwise stipulated by the applicable laws or agreed upon in writing, the copyright holders or those who are entitled to modify and redistribute the software components are not held responsible for any and all damages resulting from their use or from inability to use them. For more information about the terms of use of the software components, required items of compliance and so on, please refer to the GPL/LGPL. Customers wishing themselves to use a software component that is subject to the GPL/LGPL embedded in this product are encouraged to read the terms of the corresponding license before use. Because each individual license is prescribed by a third party other than JVCKENWOOD Corporation, the original (English) of the license is presented.

EULA
Ñ Software License Agreement
JVCKENWOOD Corporation (hereinafter called “Licensor”) holds either the copyright to the embedded software or the right to sublicense it. This agreement establishes the conditions under which the customer uses this “Licensed Software.” The customer shall agree to the terms of this license agreement before proceeding to use Licensed Software. This agreement is deemed to have taken effect when the customer (hereinafter called “User”) has used a product implementation of Licensed Software. The Licensed Software may contain software Licensor has been licensed to use by third parties directly or indirectly. Some third parties may have terms of use prescribed for their customers, apart from this Software License Agreement. This agreement does not apply to such software. Be sure to consult “Important Notice on Software” as presented separately.
Article 1 (General) Licensor grants to User a non-exclusive, nonassignable right of use Licensed Software within the country where the User purchases the Product (hereinafter the “Country”) (except for the exception provided for in Paragraph 1, Article 3).
Article 2 (Right of Use) 1. The rise of use granted under this agreement is the
right to use Licensed Software in this product. 2. User may not duplicate, copy, modify, add to,
translate or otherwise alter, or loan licensed Software and the associated literature in whole or in part. 3. Use of Licensed Software is limited to a private extent , and Licensed Software may not be distributed, licensed or sublicensed for any purposes whatsoever, including commercial use. 4. User shall use Licensed Software as per the instruction manual or instructions given in the help file and may not use or duplicate data in violations of the regulations of the Copyright Law or other governing laws by using Licensed Software in whole or in part.

Article 3 (Terms of License)
1. In assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement.
2. User may not reverse-engineer, disassemble, decompile or otherwise analyze the source code of Licensed Software.
Article 4 (Rights to Licensed Software)
All rights to Licensed Software and the associated literature, including copyrights, shall reside with Licensor or the original right holder who has granted the Right of Use and right to sublicense to Licensor (hereinafter referred to as “Original Right Holder”), and User does not have any rights other than Right of Use granted hereunder with regard to Licensed Software and the associated literature.
Article 5 (Exemption Granted to Licensor)
1. Licensor and Original Right Holder do not assume any responsibility for damages caused to User or third parties resulting from the exercise by User of the license granted hereunder, unless otherwise provided by any law to the contrary.
2. Licensor does not warrant Licensed Software to be merchantable, compatible and fit for specific purposes.
Article 6 (Responsibility for Third Parties)
If disputes over the infringement of third parties’ intellectual property rights, such as copyrights and patent rights, arise out of the use of Licensed Software by User, User shall resolve these disputes at User’s own expenses while keep Licensor and Original Right Holder harmless.
Article 7 (Secrecy Obligation)
User shall keep confidential Licensed Software provided hereunder, information contained in the associated literature or the like and those provisions of this agreement not yet in public knowledge and may not disclose or leak these to third parties without prior written consent from Licensor.

Article 8 (Cancellation of the Agreement)
Licensor reserves the right to cancel this agreement forthwith and claim compensation from User for the damages caused by such cancellation when User:
(1) Breaches any of the provisions of this agreement, or
(2) Has received a petition for seizure, provisional seizure, provisional disposition or any other kind of compulsory execution.
Article 9 (Destruction of Licensed Software)
If this agreement is terminated under the provision of the foregoing paragraph, User shall destroy Licensed Software, along with all associated literature and its duplicates, within two (2) weeks from the date of termination.
Article 10 (Copyright Protection)
1. Copyrights and all other intellectual property rights relating to Licensed Software shall reside with Licensor and Original Right Holder and in no circumstances with User.
2. User shall abide by the laws relating to copyrights and intellectual property rights in using Licensed Software.
Article 11 (Export Control)
1. Licensed Software and the associated literature or the like may not be exported to places outside the Country (including transmission outside the Country over the Internet or the like).
2. User agrees that Licensed Software is subject to export controls imposed by the Country and the United States of America.
3. User agrees to comply with all the international and domestic laws that apply to this software (U.S. Export Administration Regulations and regulations established by the U.S., the Country and their governmental agencies regarding usage by end users and export destinations).
Article 12 (Miscellaneous)
1. Even if this agreement is invalidated in part by law, all other provisions shall remain in effect.
2. Licensor and User shall consult each other in good faith to resolve any matters not provided for in this agreement or questions arising from the interpretation of this agreement.
3. Licensor and User agree that this agreement is governed by the law of Japan and that all disputes involving claims and obligations that may arise out of this agreement will be settled by arbitration at the Tokyo District Court as the court of first instance.

Before Use
Contents
Before Use …………………………………………………………… 4 About the Quick start guide…………………………………………………..4 How to read this manual…………………………………………………………4 Precautions……………………………………………………………………………………5
Basic Operations………………………………………………… 6 Functions of the Buttons on the Front Panel…………………..6 Turning on the Unit …………………………………………………………………..6 Getting Started……………………………………………………………………………7 Adjusting the volume……………………………………………………………….8 Touch screen operations…………………………………………………………8 HOME screen descriptions……………………………………………………..9 Source selection screen descriptions…………………………………9 Source control screen descriptions ………………………………….11 FUNCTION screen ……………………………………………………………………12 List screen …………………………………………………………………………………..12
USB ……………………………………………………………………..13 Connecting a USB device……………………………………………………..13 USB Basic Operation……………………………………………………………….13
Tuner …………………………………………………………………..14 Tuner Basic Operation……………………………………………………………14 Memory Operation …………………………………………………………………15
Bluetooth Control……………………………………………..16 Register from the Bluetooth device………………………………….16 Using Hands-Free Unit…………………………………………………………..17
Controlling Audio……………………………………………..20
Connection/Installation …………………………………..22 Before Installation ……………………………………………………………………22 Installing the unit …………………………………………………………………….23
Appendix …………………………………………………………… 27 Specifications…………………………………………………………………………….27 About this Unit …………………………………………………………………………27

Before Use
About the Quick start guide
This Quick Start Guide describes basic functions of this unit. For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: <https://www.jvc.net/cs/car/>
The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference.
How to read this manual
· The screens and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual screens or panels used, or some display patterns may be different.
· Indication language: English indications are used for the purpose of explanation. You can select the indication language from the [SETUP] menu. See Instruction Manual.

Precautions
# WARNINGS
Ñ To prevent injury or fire, take
the following precautions:
· To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
· Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
· If you experience problems during installation, consult your JVC dealer.
Ñ Precautions on using this unit
· When you purchase optional accessories, check with your JVC dealer to make sure that they work with your model and in your area.
· You can select language to display menus, audio file tags, etc. See Instruction Manual.
· The Radio Data System or Radio Broadcast Data System feature won’t work where the service is not supported by any broadcasting station.
Ñ Protecting the monitor
· To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with the sharp tip.
Ñ Cleaning the unit
· If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
NOTE
· Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.

Before Use
Ñ How To Reset Your Unit
· If the unit or the connected unit fails to operate properly, reset the unit.1 Press the <Reset> button.The unit returns to factory settings.
Reset button

English 5

Basic Operations
Basic Operations
Functions of the Buttons on the Front Panel

1 2
3

5
6
NOTE · The panels shown in this guide are examples
used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.

Name · Motion
1 Remote Sensor · Receives the remote control signal.

2 [] · Displays the Voice Recognition screen.

3 [FNC] / [ ] · Displays the FUNCTION screen. · Pressing for 1 second displays the APP (Apple CarPlay/ Android Auto) screen.
4 [], [] (Volume) · Adjusts volume. The volume will go up until 15 when you keep pressing .

5 [

] / [

]

· Displays the HOME screen (P.9).

· Pressing for 1 second turns the power off.

· When the power off, turns the power on.

6 Reset · If the unit or the connected unit fails to operate properly, the unit returns to initial settings when this button is pressed.

Turning on the Unit
The method of turning on is different depending on the model.
1 Press the [ ] button.
hhThe unit is turned on. To turn off the unit:
1 Press the [ ] button for 1 second.
NOTE · If it is your first time turning the unit on after
installation, it will be necessary to perform Initial setup (P.7).

Getting Started
Initial setup
Perform this setup when you use this unit first time.
1 Set each item as follows.

Basic Operations
[Camera] Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ ]. For detailed operation, see Instruction Manual.
[DEMO] Set the demonstration mode. Default is “ON”. 1 Touch [DEMO] and set [ON] or [OFF].
2 Touch [Finish].

[Language] Select the language used for the control screen and setting items. Default is “[British English(en)]”. 1 Touch [Language]. 2 Touch [Language Select]. 3 Select the desired language. 4 Touch [ ].
[Clock] Adjusts clock. For detailed operation, see Calendar/clock settings (P.7).
[Display] Set the image on the screen. 1 Touch [Display]. 2 Touch [Background]. 3 Select the image. 4 Touch [ ]. For detailed operation, see Instruction Manual.

NOTE · These settings can be set from the SETUP menu.
Calendar/clock settings 1 Press the [FNC] button.
hhFUNCTION screen appears.
2 Touch [ ].
hhSETUP Menu screen appears.

English 7

Basic Operations
3 Touch [User Interface].

Adjusting the volume
To adjust the volume (0 to 40), Press [] to increase, and press [] to decrease. Holding [] increases the volume continuously to level 15.

hhUser Interface screen appears.
4 Touch [Clock Adjust].
5 Adjust the date, then adjust the time.
6 Touch [Set].
NOTE · Deactivate [RDS CT] before adjusting the clock.
See Instruction Manual.

Touch screen operations
To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc.
Touch Touch the screen gently to select an item on the screen.
Touch and hold Touch the screen and keep your finger in place until the display changes or a message is displayed.
Flick Slide your finger quickly to the left or right on the screen to change the page. You can scroll the list screen by flicking the screen up/ down. Swipe Slide your finger up or down on the screen to scroll the screen.

Gesture Touch Control:
You can also control playback by moving your finger on the touch panel as follows (for some sources, the gesture control is not available).
· Sliding the finger towards up/down: – Functions same as pressing [ ] / [ ] (Media) in the USB Control screen. – For the Tuner, tuner preset broadcast stations are switched.
· Sliding the finger towards left/right: Functions same as pressing [E] / [F].
· Moving your finger clockwise or counterclockwise: increases/decreases the volume.

HOME screen descriptions

Most functions can be performed from the HOME screen.

Basic Operations
Display the HOME screen 1 Press the [ ] button.
hhHOME screen appears.
Source selection screen descriptions
You can display all playback sources and options on the source selection screen.
1

1 · Short-cut playback source icons. (P.10)
2 · Current source information. · Touch to display the control screen of current source.
3 · Widget
4 · Displays the source selection screen. (P.10)
5 · Displays the SETUP Menu screen.
6 · Displays the Hands Free screen. (P.17) · When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto.

1 · Changes the playback source. For playback sources, see Select the playback source (P.10).
2 · Returns to previous screen.
3 · Displays the SETUP Menu screen.

English 9

Basic Operations
Select the playback source
1 Touch [ ] on the HOME screen.
From the screen, you can select the following sources and functions.
· Switches to the Apple CarPlay screen from the connected iPhone.
· Switches to the USB Mirroring screen from the connected Android smartphone. It is necessary to connect Android smartphone with “Mirroring OA for JVC” application installed and to set [Mode] to [Mirroring for AndroidTM].
· Switches to the Radio broadcast. (P.14)
· Displays the Hands Free screen. (P.17) When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, displays “[Disconnected]” message in the TEL screen. When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto.
· Switches to the Android Auto screen from the connected Android smartphone. It is necessary to connect Android smartphone compatible with Android Auto and to set [Mode] to [Android Auto].
· Plays a Bluetooth audio player.
· Plays files on a USB device. (P.13)
· Switches to an external component connected to the AV-IN input terminal.
· Turns off the AV source. (P.10)

To turn off the AV source
1 Touch [ ] on the HOME screen. 2 Touch [AV Off].

Source control screen descriptions
There are some functions which can be operated from most screens.
Indicators
1

Basic Operations
4 [Û] Touch to display the Hands Free screen. (P.17) When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto.

Sub menu

1 [ ]/[

]

Connected Bluetooth device information.

2 All sources icon
Displays all sources.
3 Secondary screen
· [ ]/[ ] : The Secondary screen changes every time you touch it. You can also change the Secondary screen by flicking left or right on the screen.
· Indicators: Displays the current source condition and so on. [MUTE]: The mute function is active. [LOUD]: The loudness control function is on.
· Sub menu [ ]: Operation when the icon is touched: The first touch darkens the screen, the second touch darkens the screen further, and the third touch restores the screen to its original brightness. [ ]: Displays the Graphic Equalizer screen. (P.21) [ ]: Displays the APP (Apple CarPlay/ Android Auto) screen.

English 11

Basic Operations
FUNCTION screen 1 Press the [FNC] button.
hhFUNCTION screen appears.
2 Touch to display the FUNCTION screen.

List screen

There are some common function keys in the list screens of most sources.

The contents of the menu are as follows. · Displays the SETUP Menu screen. · Displays the APP (Apple CarPlay/Android Auto) screen. · Displays the Screen Adjust screen. · Displays the view camera. · Displays the source selection screen. (P.10) · Turns the display off. (P.12) · Displays the Audio screen. (P.20) · Close the FUNCTION screen.
Turn off the screen 1 Select [ ] on the FUNCTION screen.
To turn on the screen
1 Touch the display.

34 5

1 Displays list type selection window.

2 Displays music/movie file list.
3 Text scroll Scrolls the displayed text.

etc.

Keys with various functions are displayed here.
· [ ] : Plays all tracks in the folder containing the current track.
· [ ] [ ] : Moves to the upper hierarchy.

5 [ ] / [ ] / [ ] / [ ] Page scroll

You can change the page to display more items by pressing [ ]/[ ].
· [ ]/[ ] : Displays the top or bottom page.

Return

Returns to previous screen.

NOTE
· Buttons which cannot be activated from the list screen are not displayed.

USB
Connecting a USB device
1 Connect the USB device with the USB
cable. (P.25)

USB

USB Basic Operation

Most functions can be controlled from the source control screen and playback screen.

Control screen

2 Press the [ ] button. 3 Touch [ ]. 4 Touch [USB]. (P.10)
Ñ Disconnect the USB device
1 Press the [ ] button. 2 Touch [ ]. 3 Touch a source other than [USB]. 4 Detach the USB device.
Ñ Usable USB device
You can use a mass-storage-class USB device on this unit. The word “USB device” appearing in this manual indicates a flash memory device.

3
1 [ ]/[ ]
· [ ] : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; File repeat ([ ]), Folder repeat ([ ]), Repeat all ([ ])
· [ ] : Randomly plays all tracks in current folder. Each time you touch the key, random mode switches in the following sequence; File random ([ ]), Random off ([ ])
2 Track information
Displays the information of the current file.
3 [Operation keys
· [1] : Searches track/file. For details on search operation, see Instruction Manual.
· [E] [F] : Searches the previous/next track/ file. Touch and hold to fast forward or fast backward.
· [D/H] : Plays or pauses. · [ ] : Touch to mute or not to mute.

English 13

Tuner
Tuner

Tuner Basic Operation

Most functions can be controlled from the source control screen.

To enter Tuner source, touch [Tuner] icon in the source selection screen. (P.10)

Control screen

5 6 3

Open the drawer

5 4
7
1 Information display Displays the information of the current station: Frequency Touching [ ] allows you to switch between Content A and Content B.
Content A: PS name, Radio Text, PTY Genre Content B: Radio Text plus, Title Artist [Preset#]: Preset number
2 Seek mode Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL]. · [AUTO1]: Tunes in a station with good
reception automatically. · [AUTO2]: Tunes in stations in memory one
after another. · [MANUAL]: Switches to the next frequency
manually.

3 Operation keys
· [E] [F] : Tunes in a station. The method of frequency switching can be changed (see 2 in table).
· [ ] : Touch to mute or not to mute.
4 Preset list
· Touch on the right side of the screen to display the Preset list. Touch again to close the list.
· Recalls the memorized station. · When touched for 2 seconds, stores the
current receiving station in memory.
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. · [TI] (FM only): Sets the traffic information mode
on. For details, see Instruction Manual. · [SETUP] (FM only): Displays the Tuner SETUP
screen. For details, see Instruction Manual. · [AME]: Presets stations automatically. For
details, see Instruction Manual. · [PTY] (FM only): Searches a program by setting
program type. For details, see Instruction Manual. · [MONO] (FM only): Select the Monaural reception. · [LO.S] (FM only): Turns the Local Seek function on or off.
6 [FM] [AM]
Switches the band.
7 Indicator Items
· [ST]: A stereo broadcast is being received. · [MONO]: The forced monaural function is on. · [AF]: The AF search function is on. · [LOS]: The Local Seek function is on. · [RDS]: Indicates the state of the Radio Data
System station when the AF function is on. White: Radio Data System is being received. Orange: Radio Data System is not being received.

· [TI]: Indicates the reception state of traffic information. White: TP is being received.
Orange: TP is not being received.

Tuner
Memory Operation
Ñ Auto memory
You can store stations with good reception in memory automatically.
1 Touch desired band key.

2 Touch [ ] on the left side of the screen.
Touch [AME].

hhA confirmation screen appears.
3 Touch [Yes].
hhAuto memory starts.
Ñ Manual memory
You can store the current receiving station in memory.
1 Select a station you wish to store in
memory.
2 Touch [FM#] (#: 1-24) or [AM#] (#: 1-12) in
which you want to store the station for 2 seconds.

English 15

Bluetooth Control
Bluetooth Control
Ñ About the cell-phone and
Bluetooth audio player
This unit conforms to the following Bluetooth specifications:
Version Bluetooth Ver. 4.1
Profile Cell-phone: HFP (Hands Free Profile) SPP (Serial Port Profile) PBAP (Phonebook Access Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile)
Sound codec SBC, AAC
NOTE · The units supporting the Bluetooth function
have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. · However, it may be impossible for such units to communicate with your cell-phone depending on its type.

Register from the Bluetooth device
It is necessary to register the Bluetooth audio player or cell-phone to this unit before using the Bluetooth function.
1 Turn on the Bluetooth function on your
smartphone/cell-phone.
2 Search the unit (“KW-M*****”) from your
smartphone/cell-phone.
3 Operate your smartphone/cell-phone
according to the displayed messages. Confirm the request on the
smartphone/cell-phone.
If a PIN code is required, enter the PIN code (“0000”).
4 Press the [FNC] button.
hhFUNCTION screen appears.
5 Touch [ ].

hhSETUP Menu screen appears.
6 Touch [Bluetooth].

hhBluetooth SETUP screen appears.
16

7 Touch [Select Device] in the Bluetooth
SETUP screen.
8 Touch [ ] you want to connect.

Bluetooth Control
Using Hands-Free Unit
You can use telephone function by connecting the Bluetooth telephone to this unit.
NOTE · While Apple CarPlay or Android Auto is being
connected, Bluetooth Hands-Free function cannot be used. Only Apple CarPlay or Android Auto Hands-Free function can be used.
Ñ Make a call 1 Touch [Phone]/[Û].

NOTE · If the icon is lighted, it means that the unit will
use that device.
To delete the registered Bluetooth device
1 Touch [ ].
hhConfirmation message appears.
2 Touch [Yes].

hhHands Free screen appears.
2 Select a dialing method.
· [ ]: Call using call records · [ ]: Call using the phonebook · [ ]: Call using the preset number · [ ]: Call by entering a phone number · [ ]: Voice Recognition · [ ]: Bluetooth SETUP Bluetooth SETUP 1) Touch [ ]. Bluetooth SETUP screen appears. NOTE · The status icons such as battery and antenna displayed may differ from those displayed on the cell-phone. · Setting the cell-phone in the private mode can disable the hands-free function.

English 17

Bluetooth Control
Call using call records
1 Touch [ ]. 2 Select the phone number from the list.

Call using the preset number
1 Touch [ ]. 2 Touch the Name or phone number.

Call by entering a phone number
1 Touch [ ]. 2 Enter a phone number with number keys.

Call using the phonebook
1 Touch [ ]. 2 Select the person you want to call from
the list.

3 Touch [ ].

3 Select the phone number from the list.

NOTE · If no Phonebook has been downloaded,
touching [Download Phonebook Now] will start downloading the Phonebook.
18

Ñ Receive a call
1 Touch [ ] to answer a phone call or [ ]
to reject an incoming call.

Bluetooth Control
Ñ Operations during a call

NOTE · While monitoring the view camera, this screen
does not appear even if a call comes in. To display this screen, return the shift knob of car to the driver position.
To end call
1 While talking, touch [ ].

Adjust the receiver volume Press the [] or [] button.
Output the dial tone Touch [DTMF] to display the tone input screen. You can send tones by touching desired keys on the screen. Switching the speaking voice output Touching [ ]/ [ ] each time switches the speaking voice output between cell-phone and speaker. Call-waiting When you receive a call while talking on another call, you can answer the newly received call by touching [ ]. The current call is on hold. Each time you touch [ ], the caller will change. When you touch [ ], the current call will end and switch to the call in hold.

English 19

Controlling Audio
Controlling Audio
You can adjust the various settings such as audio balance or subwoofer level.
1 Press the [FNC] button.
hhFUNCTION screen appears.
2 Touch [ ].

Ñ Controlling General Audio
1 Press the [FNC] button.
hhFUNCTION screen appears.
2 Touch [ ].
hhAudio screen appears.
3 Touch [Fader / Balance].

4 Set each item as follows.

[Fader] / [Balance] Adjust the volume balance around the touched area.
[C] and [D] adjust the right and left volume balance.
[R] and [S] adjust the front and rear volume balance.
[Center] Clear the adjustment.

Ñ Equalizer Control
You can adjust equalizer by selecting the optimized setting for each category.
1 Press the [FNC] button.
hhFUNCTION screen appears.
2 Touch [ ].
hhAudio screen appears.
3 Touch [Equalizer].
4 Touch the screen and set the Graphic
Equalizer as desired.

Controlling Audio
[SW Level] Adjusts the subwoofer volume.

[ALL SRC] Apply the adjusted equalizer to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.
Gain level (dotted frame area) Adjust the gain level by touching the each frequency bar. You can select frequency bar and adjust its level by [R], [S].
[Preset Select] Displays the screen to recall the preset equalizer curve.
[Initialize] The current EQ curve returns to flat.
[Memory] Saves the adjusted equalizer curve from “[User1]” to “[User3]”.
[Bass EXT] (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz.

English 21

Connection/Installation
Connection/Installation

Before Installation
Before installation of this unit, please note the following precautions.
# WARNINGS
· If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
· Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
# CAUTION
· Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.
NOTE
· Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.
· Make sure to ground the unit to a negative 12V DC power supply.
· Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
· If the power is not turned ON (“There is an error in the speaker wiring. Please check the connections.” is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.
· If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained.

· If the console has a lid, make sure to install the unit so that the front panel will not hit the lid when closing and opening.
· If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
· Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
· Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the car.
· When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the ¢ connector of the left speaker to a front output terminal, do not connect the ¤ connector to a rear output terminal.
· After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
· Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result.
· Reception may drop if there are metal objects near the Bluetooth antenna.
Bluetooth antenna unit

Ñ Supplied accessories for
installation

(3 m)

(2 m)

x2
Ñ Installation procedure
1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery.
2) Make the proper input and output wire connections for each unit.
3) Connect the ISO connector to the unit. 4) Install the unit in your car. 5) Reconnect the ¤ terminal of the battery. 6) Press the reset button.

Connection/Installation
Installing the unit
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. NOTE · Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).
Ñ Trim plate
1) Attach accessory 2 to the unit.
2

English 23

Connection/Installation
Ñ Microphone unit
1) Check the installation position of the microphone (accessory 1).
2) Clean the installation surface. 3) Remove the separator of the microphone
(accessory 1), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 1) to the driver.
1

Ñ Removing the unit
1) Remove the trim plate by referring to step 1 in “Removing the trim plate”.
2) Insert the extraction key (accessory 5) deeply into the slot as shown. (The protrusion at the tip of the extraction key must face toward the unit.)
5 3) With the inserted extraction key secured,
insert the other extraction key into the slot.

Fix a cable with a commercial item of tape.
NOTE · Swap the clips if necessary.

5 4) Pull out the unit halfway.

Ñ Removing the trim plate
1) Use the extraction key (accessory 4) to lever out the four tabs (two on the left part, two on the right part).
4

NOTE · Be careful to avoid injury from the catch
pins on the extraction key.
5) Pull the unit all the way out with your hands, being careful not to drop it.

2) Pull the trim plate forward.

Ñ Connecting wires to terminals

Connection/Installation

STEERING WHEEL REMOTE INPUT

Light Blue/Yellow (Steering remote control wire)
To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car.

Light Green (Parking sensor wire) Accessory 3: Parking Extention cable

Connect to the vehicle’s parking brake detection switch harness.

For best safety, be sure to connect the parking sensor.

Connect to vehicle’s steering remote harness. Contact your JVC dealer for details.

ST REMOTE INPUT 1

Bright

Green/Red

ST REMOTE INPUT 2

Purple/Red

ST REMOTE GND

Gray/Red

USB terminal[1] (1.0 m)

5V=1.5A

USB device[2]

Cap

Subwoofer Preout

SUB WOOFER

Cap

REVERSE PRK SW

Connect to vehicle’s reverse lamp harness when using the optional rear view camera.

Purple/White (Reverse sensor wire)

1357 2468
1357 2468

Accessory 1: Bluetooth Microphone
FM/AM antenna

Connector A Connector B
ISO Connector

Fuse (15A)

1 234
AV-IN (1; Left audio, 2; Composite video, 3; Ground, 4; Right audio).

[1] USB maximum power supply current : DC 5 V = 1.5 A
[2] Sold separately

REAR OUT FRONT OUT CAM IN VIDEO OUT

Rear Audio Preout (Left; White, Right; Red)
Front Audio Preout (Left; White, Right; Red)
Visual Output (Yellow)
Rear view camera input (Yellow)

English 25

Connection/Installation

Ñ ISO Connector function guide

Pin Color and function

A-4

Yellow

Battery

A-5

Blue

Power Antenna[1]

A-6

Orange/White Illumination

A-7

Red

Ignition (ACC)

A-8

Black

B-1/ B-2 Purple (+) / Purple/Black ()

Earth (Ground) Connection
Rear Right

B-3/ B-4 Gray (+) / Gray/Black ()

Front Right

B-5/ B-6 White (+) / White/Black ()
B-7/ B-8 Green (+) / Green/Black ()
[1] Max. 150 mA, 12V · Speaker Impedance: 4-8

Front Left Rear Left

! CAUTION
Before you connect the commercially available ISO connectors to the unit, check the following condition: · Make sure that the pin assignment of the
connector matches with the JVC unit. · Take extra notice of the power wire. · In case battery wire and ignition wire are not
corresponding then change them accordingly. · In case the car does not have an ignition wire,
use a commercially available interface.

Ñ Connecting an iPhone/Android
Android smartphone[2] USB cable[2]

KS-U62 (0.8m)[3]

iPhone[2] Lightning connector

USB terminal[1] (1.0 m)
5V=1.5A
Cap

[1] iPhone maximum power supply current : DC 5 V = 1.5 A
[2] Sold separately [3] Optional accessory

Appendix
Specifications
Bluetooth section
Frequency : 2.402 2.480 GHz
RF Output Power (E.I.R.P.) : +8 dBm (Avg.), Power Class 1
General
Operating Voltage : 12V DC Car Battery
Speaker Impedance : 4 8
Specifications subject to change without notice.

Appendix
About this Unit
Copyrights
· The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
· Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
· This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
· Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
· Apple, iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
· Apple, Siri, Apple CarPlay and Apple CarPlay logo are trademarks of Apple Inc., registered in the U.S. and other countries.
· App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
· IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
· Google, Android, Google Play and Android Auto are trademarks of Google LLC.
· To use Android Auto on your car display, you’ll need an Android Auto compatible vehicle or aftermarket stereo, an Android phone running Android 5.0 or higher, and the Android Auto app.
· Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
· THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (¡)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (¡¡)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/ OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
· THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR
English 27

Appendix
(¡) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/ OR (¡¡) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
· THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/ OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
· libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007 ,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
· libvorbis Copyright (c) 2002-2008 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
28

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
· libogg Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
(
.) X (
. )
. .
. Pb :
.

Appendix

English 29

Avant l’utilisation
Table des matières
Avant l’utilisation………………………………………………30 À propos du guide de démarrage rapide………………………30 Comment lire ce manuel ……………………………………………………..30 Précautions…………………………………………………………………………………31
Utilisation de base…………………………………………….32 Fonctions des boutons en façade …………………………………….32 Mise en marche de l’appareil………………………………………………32 Mise en route…………………………………………………………………………….33 Régler le volume………………………………………………………………………34 Fonctionnement tactile ………………………………………………………..34 Descriptions de l’écran d’ACCUEIL ……………………………………35 Descriptions de l’écran de sélection de source …………..35 Descriptions de l’écran de commande de source………37 Écran FONCTIONS……………………………………………………………………38 Écran des listes………………………………………………………………………….38
USB ……………………………………………………………………..39 Connecter un périphérique USB ……………………………………….39 Utilisation de base USB………………………………………………………….39
Tuner …………………………………………………………………..40 Utilisation de base de la radio…………………………………………….40 Utilisation de la mémorisation……………………………………………41
Utilisation du Bluetooth…………………………………..42 Enregistrez depuis le périphérique Bluetooth……………..42 Utilisation du module mains-libres…………………………………..43
Contrôle de l’audio …………………………………………..46
Connexion/Installation…………………………………….48 Avant l’installation …………………………………………………………………..48 Installation de l’appareil………………………………………………………..49
Annexes ……………………………………………………………..53 Spécifications…………………………………………………………………………….53 À propos de cet appareil ………………………………………………………53

Avant l’utilisation
À propos du guide de démarrage rapide
Ce Guide de démarrage rapide décrit les fonctions de base de cet appareil. Pour des informations et des opérations détaillées, reportez-vous au MODE D’EMPLOI sur le site Web suivant : <https://www.jvc.net/cs/car/>
Le mode d’emploi est susceptible d’être modifié suite aux changements pouvant être apportés aux spécifications etc. Téléchargez impérativement la dernière édition du mode d’emploi à titre de référence.
Comment lire ce manuel
· Les écrans et façades illustrés dans le présent manuel sont des exemples destinés à fournir des explications plus claires des opérations. C’est pourquoi il est possible qu’ils soient différents des écrans effectivement affichés ou de la façade de l’appareil, ou que certaines séquences d’affichage soient différentes.
· Langue des indications : Les indications en anglais sont utilisées dans un but explicatif. Vous pouvez choisir la langue des indications à partir du menu [SETUP]. Voir le Mode d’emploi.

Précautions
#AVERTISSEMENTS
Ñ Pour éviter toute blessure
ou incendie, prenez les précautions suivantes :
· Pour éviter un court-circuit, ne mettez ni ne laissez jamais d’objets métalliques (comme des pièces de monnaie ou des outils en métal) à l’intérieur de l’appareil.
· Ne regardez pas ni ne fixez votre regard sur l’affichage de l’appareil trop longtemps pendant la conduite.
· Si vous rencontrez des problèmes pendant l’installation, consultez votre revendeur JVC.
Ñ Précautions d’utilisation de
l’appareil
· Lorsque vous achetez des accessoires en option, vérifiez auprès de votre revendeur JVC qu’ils fonctionneront avec votre modèle et dans votre région.
· Vous avez le choix de la langue dans laquelle s’affichent les menus, les balises des fichiers audio, etc. Voir le Mode d’emploi.
· Les fonctions Radio Data System ou Radio Broadcast Data System sont inopérantes dans les zones où le service n’est pris en charge par aucune station de radiodiffusion.
Ñ Protection du moniteur
· Ne touchez pas le moniteur avec un stylo à bille ou tout autre outil pointu. Cela pourrait l’endommager.

Avant l’utilisation
Ñ Nettoyage de l’appareil
· Si la façade de l’appareil est tâchée, essuyez-la avec un chiffon doux et sec comme un chiffon en silicone. Si la fa&am

Download

JVC Monitor With Receiver User Guide

Was this manual helpful?