JVC Digital Media Receiver CD User Guide

Digital Media Receiver CD

KD-T922BT / KD-DB622BT / KD-X38MDBT

ENGLISH ESPAÑOL NEDERLANDS PORTUGUÊS DEUTSCH FRANÇAIS ITALIANO CCK

CD RECEIVER / DIGITAL MEDIA RECEIVER
Quick Start Guide
RECEPTOR CON CD / RECEPTOR DE MEDIOS DIGITALES
Guía de inicio rápido
CD-RECEIVER / DIGITALE MEDIAONTVANGER
Snelstartgids
RECEPTOR CD / RECEPTOR MÉDIA DIGITAL
Guia de Início Rápido
CD-RECEIVER / DIGITAL-MEDIA-RECEIVER
Schnellstartanleitung
RÉCEPTEUR CD / RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
Guide de démarrage rapide
SINTOAMPLIFICATORE CON RIPRODUTTORE DI CD / RICEVITORE MULTIMEDIALE DIGITALE
Guida di avvio rapido
CD-PECBEP / –

For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: Raadpleeg de GEBRUIKSAANWIJZING op de volgende website voor gedetailleerde informatie over de bediening: Para as operações e informações detalhadas, consulte o MANUAL DE INSTRUÇÕES no website abaixo: Für detaillierte Bedienungen und Informationen siehe BEDIENUNGSANLEITUNG auf der folgenden Website: Pour les opérations et les informations détaillées, reportez-vous au MANUEL D’INSTRUCTIONS sur le site web suivant: Per le operazioni e le informazioni dettagliate, fare riferimento al ISTRUZIONI PER L’USO nel seguente sito web: HCTPK O KCATA -:
<http://www.jvc.net/cs/car/>

B5K-0769-10 [E]

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos. Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente. Nota: El símbolo “Pb” debajo del (contenedor con ruedas tachado) en baterías indica que dicha batería
contiene plomo.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen (particulieren) Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale huishoudelijke afval mogen. Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op de juiste manier worden verwerkt, teruggewonnen en hergebruikt. Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking van afval. Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.
Informação sobre a forma de deitar fora Velho Equipamento Eléctrico, Electrónico e baterias (aplicável nos países que adotaram sistemas de recolha de lixos separados) Produtos e baterias com o símbolo (caixote do lixo com um X) não podem ser deitados fora junto com o lixo doméstico. Equipamentos velhos eléctricos, electrónicos e baterias deverão ser reciclados num local capaz de o fazer bem assim como os seus subprodutos. Contacte as autoridades locais para se informar de um local de reciclagem próximo de si. Reciclagem e tratamento de lixo correctos ajudam a poupar recursos e previnem efeitos prejudiciais na nossa saúde e no ambiente. Note: o símbolo “Pb” abaixo do símbolo em baterias indica que esta bateria contém chumbo.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte) Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen ,,Pb” unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Information sur l’élimination des anciens équipements électriques et électroniques et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective) Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas être éliminés comme ordures ménagères. Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites capables de traiter ces produits et leurs déchets. Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur notre santé et sur l’environnement. Remarque: Le symbole “Pb” ci-dessous sur des piles électrique indique que cette pile contient du plomb.
Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata) I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti insieme ai normali rifiuti di casa. I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in grado di trattare questi prodotti e di smaltirne i loro componenti. Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all’ambiente. Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

(/) . ” ” () ” , , ” (7) . , , (2) . (), , , , , JVC, , .
: : 30°C +85°C : 0% 90%
For Israel

SOFTWARE LICENSE AGREEMENT
The software embedded in the Product (hereinafter the “Licensed Software”) provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.
The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the “User”) initially used the Product in which the “Licensed Software” is embedded.
The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the “Important Notice concerning the Software” to be provided separately below.
Article 1 General Provision
The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the “Country”)
Article 2 License
1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.
2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.
3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.
4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.
Article 3 Conditions for Grant of License
1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.
2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software
Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the “Original Rightholder”), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.
Article 5 Indemnification of Licensor
1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.
2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.
Article 6 Liability to Third Party
If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User’s use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.
Article 7 Confidentiality
The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.
Article 8 Termination
In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment,
provisional disposition or any other compulsory execution.

iii

Article 9 Destruction of the Licensed Software
If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.
Article 10 Protection of Copyright
1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.
Article 11 Export Restriction
1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).
2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.
3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).
Article 12 Miscellaneous
1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.
2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.
3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software
-jansson
Copyright (c) 2009-2012 Petri Lehtinen <>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-cJSON
Copyright (c) 2009 Dave Gamble
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-CMP
The MIT License (MIT) Copyright (c) 2014 Charles Gunyon
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
nanopb
Copyright (c) 2011 Petteri Aimonen <jpa at nanopb.mail.kapsi.fi>
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.

sha2 AUTHOR: Aaron D. Gifford – http://www.aarongifford.com/
Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved.
You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Posix Copyright (c) 1990, 1993 The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
Developed at SunPro, a Sun Microsystems, Inc. business. Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Author: Chris G. Demetriou
Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS “AS IS” CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
Carnegie Mellon requests users of this software to return to
Software Distribution Coordinator or CS.CMU.EDU School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890
any improvements or extensions that they make and grant Carnegie the rights to redistribute these changes. License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or referencing the derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
Copyright (c) 1993 Martin Birgmeier All rights reserved.
You may redistribute unmodified or modified versions of this source code provided that the above copyright notice and this and the following conditions are retained.
This software is provided “as is”, and comes with no warranties of any kind. I shall in no event be liable for anything that happens to anyone/anything when using this software. These notices must be retained in any copies of any part of this documentation and/or software.

T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org)
BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
LFS Subsystem Copyright The Regents of the University of California. All rights reserved.
You may obtain a copy of the license at https://directory.fsf.org/wiki/License:BSD-4-Clause
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Accordo2 Player Apache License Licensed under the Apache License, Version 2.0, January 2004(the “License”); You may obtain a copy of the license at http://www.apache.org/licenses/LICENSE-2.0
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU Representative: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Declaración de conformidad con respecto a la Directiva RE 2014/53/EU Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU
Fabricante: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Representante en la UE: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU)
Fabrikant: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU-vertegenwoordiger: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Declaração de conformidade relativa à Directiva RE 2014/53/EU Declaração de conformidade relativa à Directiva RoHS 2011/65/EU
Fabricante: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Representante na UE: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
vii

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU
Hersteller: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU-Vertreter: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Déclaration de conformité se rapportant à la directive RE 2014/53/EU Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU
Fabricant: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Représentants dans l’UE: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Dichiarazione di conformità alla Direttiva RE 2014/53/EU Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU
Produttore: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Rappresentante UE: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
RE 2014/53/EU RoHS 2011/65/EU
: JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN : JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

English
Hereby, JVCKENWOOD declares that the radio
equipment “KD-T922BT/KD-DB622BT/ KD-X38MDBT” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.jvc.net/cs/car/eudoc/
Français Par la présente, JVCKENWOOD déclare que
l’équipement radio « KD-T922BT/KD-DB622BT/ KD-X38MDBT » est conforme à la directive 2014/53/UE.
L’intégralité de la déclaration de conformité UE est
disponible à l’adresse Internet suivante :
http://www.jvc.net/cs/car/eudoc/
Deutsch
Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KD-T922BT/KD-DB622BT/KD-X38MDBT” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.jvc.net/cs/car/eudoc/
Nederlands Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KD-T922BT/KD-DB622BT/ KD-X38MDBT” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.jvc.net/cs/car/eudoc/

Italiano Con la presente, JVCKENWOOD dichiara che lapparecchio radio “KD-T922BT/KD-DB622BT/ KD-X38MDBT” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.jvc.net/cs/car/eudoc/
Español Por la presente, JVCKENWOOD declara que el equipo de radio “KD-T922BT/KD-DB622BT/ KD-X38MDBT” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.jvc.net/cs/car/eudoc/
Português Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KD-T922BT/KD-DB622BT/ KD-X38MDBT” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.jvc.net/cs/car/eudoc/
Polska Niniejszym, JVCKENWOOD deklaruje, e sprzt radiowy “KD-T922BT/KD-DB622BT/KD-X38MDBT” jest zgodny z dyrektyw 2014/53/UE. Pelny tekst deklaracji zgodnoci EU jest dostpny pod adresem: http://www.jvc.net/cs/car/eudoc/

Ceský Spolecnost JVCKENWOOD tímto prohlasuje, ze rádiové zaízení “KD-T922BT/KD-DB622BT/ KD-X38MDBT” spluje podmínky smrnice 2014/53/EU. Plný text EU prohlásení o shod je dostupný na následující internetové adrese: http://www.jvc.net/cs/car/eudoc/
Magyar JVCKENWOOD ezennel kijelenti, hogy a ,,KD-T922BT/KD-DB622BT/KD-X38MDBT” rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhet el: http://www.jvc.net/cs/car/eudoc/
Svenska Härmed försäkrar JVCKENWOOD att radioutrustningen “KD-T922BT/KD-DB622BT/ KD-X38MDBT” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress : http://www.jvc.net/cs/car/eudoc/
Suomi JVCKENWOOD julistaa täten, että radiolaite “KD-T922BT/KD-DB622BT/KD-X38MDBT” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.jvc.net/cs/car/eudoc/

Slovensko S tem JVCKENWOOD izjavlja, da je radijska oprema »KD-T922BT/KD-DB622BT/KD-X38MDBT« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.jvc.net/cs/car/eudoc/
Slovensky Spolocnos JVCKENWOOD týmto vyhlasuje, ze rádiové zariadenie ,,KD-T922BT/KD-DB622BT/ KD-X38MDBT” vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.jvc.net/cs/car/eudoc/
Dansk Herved erklærer JVCKENWOOD, at radioudstyret “KD-T922BT/KD-DB622BT/KD-X38MDBT” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.jvc.net/cs/car/eudoc/
, JVCKENWOOD «KD-T922BT/KD-DB622BT/ KD-X38MDBT» 2014/53/. : http://www.jvc.net/cs/car/eudoc/

viii

Eesti
Käesolevaga JVCKENWOOD kinnitab, et ,,KD-T922BT/KD-DB622BT/KD-X38MDBT” raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.jvc.net/cs/car/eudoc/
Latviesu JVCKENWOOD ar so deklar, ka radio aparatra ,,KD-T922BT/KD-DB622BT/KD-X38MDBT” atbilst direktvas 2014/53/ES prasbm. Pilns ES atbilstbas deklarcijas teksts ir pieejams sd tmeka adres: http://www.jvc.net/cs/car/eudoc/
Lietuviskai Siuo JVCKENWOOD pazymi, kad radijo ranga ,,KD-T922BT/KD-DB622BT/KD-X38MDBT” atitinka 2014/53/EB direktyvos reikalavimus. Vis EB direktyvos atitikties deklaracijos tekst galite rasti siuo internetiniu adresu: http://www.jvc.net/cs/car/eudoc/
Malti
B’dan, JVCKENWOOD jiddikjara li t-tagmir tar-radju “KD-T922BT/KD-DB622BT/KD-X38MDBT” huwa konformi mad-Direttiva 2014/53/UE.
It-test kollu tad-dikjarazzjoni ta’ konformità huwa
disponibbli fl-indirizz intranet li ej:
http://www.jvc.net/cs/car/eudoc/

HRVATSKI / SRPSKI JEZIK
JVCKENWOOD ovim izjavljuje da je radio oprema “KD-T922BT/KD-DB622BT/KD-X38MDBT” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklaenosti dostupan je na sljedeoj internet adresi: http://www.jvc.net/cs/car/eudoc/
ROMÂN Prin prezenta, JVCKENWOOD declar c echipamentul radio “KD-T922BT/KD-DB622BT/ KD-X38MDBT” este în conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei de conformitate UE este disponibil la urmatoarea adres de internet: http://www.jvc.net/cs/car/eudoc/
JVCKENWOOD , “KD-T922BT/KD-DB622BT/ KD-X38MDBT” 2014/53/. : http://www.jvc.net/cs/car/eudoc/
Turkish Burada, JVCKENWOOD “KD-T922BT/KD-DB622BT/ KD-X38MDBT” radyo ekipmaninin 2014/53/AB Direktifine uygun olduunu bildirir. AB uyumluluk deklarasyonunun tam metni aaidaki internet adresinde mevcuttur. http://www.jvc.net/cs/car/eudoc/

JVCKENWOOD , «KD-T922BT/KD-DB622BT/KD-X38MDBT» 2014/53/EU. : http://www.jvc.net/cs/car/eudoc/
, JVCKENWOOD , «KD-T922BT/KD-DB622BT/KD-X38MDBT» 2014/53/EU. : http://www.jvc.net/cs/car/eudoc/

KD-T922BT/KD-DB622BT:
The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
La marca para los productos que utilizan láser Esta etiqueta está colocada en el chasis e indica que el componente funciona con rayos láser de clase1. Esto significa que el aparato utiliza rayos láser considerados como de clase débil. No existe el peligro de que este aparato emita al exterior una radiación peligrosa.
Markering op produkten die laserstralen gebruiken Dit label is aangebracht op de behuizing/houder en toont dat de component een laserstraal gebruikt die als Klasse 1 is geclassificeerd. Dit betekent dat de laserstraal relatief zwak is en er geen gevaar van straling buiten het toestel is.
A marca dos produtos utilizando laser A etiqueta é presa no chassis/estojo e indica que o componente utiliza raios laser, classificados como sendo de Classe 1. Isto significa que o aparelho está a utilizar raios laser que são de uma classe mais fraca. Não há perigo de radiação maléfica fora do aparelho.
Kennzeichnung von Geräten mit Laser-Abtastern Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.
Marquage des produits utilisant un laser L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de radiation accidentelle hors de l’appareil.

Etichetta per i prodotti che impiegano raggi laser L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il componente impiega raggi laser che sono stati classificati come classe 1. Ciò significa che l’apparecchio utilizza raggi laser di una classe inferiore. Non c’è alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio.
, , , 1. , . .

Installation/Connection
This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
WARNING
· The unit can only be used with a 12 V DC power supply, negative ground. · Disconnect the battery’s negative terminal before wiring and mounting. · Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to
prevent a short circuit. · To prevent short circuit:
Insulate unconnected wires with vinyl tape. Be sure to ground this unit to the car’s chassis again after installation. Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with
metal parts to protect the wires.

Basic procedure
1 Remove the key from the ignition switch, then disconnect the terminal of the car battery.
2 Connect the wires properly. See “Wiring connection” on page 3, 4. 3 Install the unit to your car. See the following “Installing the unit
(in-dash mounting)”. 4 Connect the terminal of the car battery. 5 Press BSRC to turn on the power. 6 Detach the faceplate and reset the unit within 5 seconds. See “How to
reset” on page 5.
Installing the unit (in-dash mounting)

CAUTION
· Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
· Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel.
· Connect speakers with a maximum power of more than 50 W. If the maximum power of the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers.
· Mount the unit at an angle of less than 30º. · If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the
terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. · Keep all cables away from heat dissipate metal parts. · After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. · If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

Hook on the top side

Dashboard of your car
Bend the appropriate tabs to hold the sleeve firmly in place.

Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws (commercially available).

KD-T922BT/KD-DB622BT:

KD-X38MDBT:

Wiring connection of KD-T922BT

Antenna terminal

Fuse (10 A)

Self-tapping screw type
Use only the specified screws. Using wrong screws might damage the unit.

Removing the unit KD-T922BT/KD-DB622BT:

KD-X38MDBT:

a Light blue/yellow: To the steering wheel remote control adapter
b Yellow: Battery wire c Yellow: A4 d Red: Ignition wire e Red: A7
ISO connectors

Part list (supplied)
(A) Faceplate (×1) (B) Trim plate (×1) (C) Mounting sleeve (×1)

(D) Wiring harness (×1) (E) Extraction key (×2)

Pin A4 Yellow A5 Blue/white A6 Orange/white A7 Red A8 Black B1, B2 Purple ], Purple/black [ B3, B4 Gray ], Gray/black [ B5, B6 White ], White/black [ B7, B8 Green ], Green/black [

Color and function : Battery : Power control (12 V 350 mA) : Car light control switch : Ignition (ACC) : Earth (ground) connection : Rear speaker (right) : Front speaker (right) : Front speaker (left) : Rear speaker (left)

Wiring connection of KD-DB622BT/KD-X38MDBT

DAB antenna jack (SMB connector)

Fuse (10 A)

Antenna terminal

a Light blue/yellow: To the steering wheel remote control adapter
b Yellow: Battery wire c Yellow: A4 d Red: Ignition wire e Red: A7

ISO connectors

Pin A4 Yellow A5 Blue/white A6 Orange/white A7 Red A8 Black B1, B2 Purple ], Purple/black [ B3, B4 Gray ], Gray/black [ B5, B6 White ], White/black [ B7, B8 Green ], Green/black [

Before Use
IMPORTANT
· To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide.
· Please keep the Guide in a safe and accessible place for future reference.
WARNING
Do not operate any function that takes your attention away from safe driving.
CAUTION
Volume setting: · Adjust the volume so that you can hear sounds outside the car to prevent
accidents. · Lower the volume before playing digital sources to avoid damaging the
speakers by the sudden increase of the output level.
General: · Avoid using the external device if it might hinder safe driving. · Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data. · Never put or leave any metallic objects (such as coins or metal tools) inside
the unit to prevent a short circuit. · KD-T922BT/KD-DB622BT: If a disc error occurs due to condensation on the
laser lens, eject the disc and wait for the moisture to evaporate.

Basics

Faceplate of KD-T922BT

Volume knob

Loading slot

Auxiliary input jack

Faceplate of KD-X38MDBT
Volume knob

Auxiliary input jack

Detach button

Display window*1

USB input terminal

Faceplate of KD-DB622BT

Volume knob

Loading slot

Auxiliary input jack

Detach button

Display window*1

USB input terminal

Attach

Detach

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

Detach button

Display window*1

USB input terminal

Attach

Detach

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

On the faceplate

Turn on the power

Press BSRC. · Press and hold to turn off the
power.

Adjust the volume

Turn the volume knob.

Select a source

Press BSRC repeatedly.

Change the display information*2 Press

repeatedly.

*1 Only for illustration purpose. *2 One of the display information supports Music Synchronization Effect. The illumination color or
brightness level of the buttons changes and synchronizes with the music level.

Getting Started

1 Acknowledge the crossover type and cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows: “2-WAY X’OVER” or “3-WAY X’OVER” “PRESS” “VOLUME KNOB” “TO CONFIRM”.
1 Press the volume knob to acknowledge the current crossover type. Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.
2 Press the volume knob. [YES] is selected for the initial setup.
3 Press the volume knob again. “DEMO OFF” appears.

2 Set the clock and date

1 Press and hold

2 Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”. 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date
7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year”.

9 Press

to exit.

To return to the previous setting item, press

3 Set the basic settings

1 Press and hold

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

[SYSTEM] [KEY BEEP]
[FACTORY RESET]
[CLOCK] [CLOCK DISPLAY]
[ENGLISH] [] [ESPANOL] [FRANCAIS] [DEUTSCH]* * Only for KD-T922BT.

Default: [XX]
(Not applicable when 3-way crossover is selected.) [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.
[ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels.
Select the display language for menu and music information if applicable. By default, [ENGLISH] is selected.

Digital Radio (for KD-DB622BT/KD-X38MDBT)

About DAB (Digital Audio Broadcasting) DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble”. The “primary component” (main radio station) is sometimes accompanied by a “secondary component” which can contain extra programs or other information.

Preparation:

1 Connect a DAB antenna (commercially available) to the DAB antenna

jack. (Page 4)

2 Press BSRC repeatedly to select DAB.

3 Press and hold

DAB to start the Service List update.

“DAB SORTING” appears and update starts.

Updates take up to 3 minutes. No interruption (such as traffic

information) is possible during updates.

To cancel the Service List update: Press and hold

DAB again.

Search for an ensemble
1 Press BSRC repeatedly to select DAB. 2 Press S / T to search for an ensemble automatically.
(or) Press and hold S / T until “M” flashes, then press repeatedly to search for an ensemble manually. 3 Press S / T to select a service (either primary or secondary) to listen to.

Settings in memory

You can store up to 18 services.

Store a service
While listening to a service…. Press and hold one of the number buttons (1 to 6).
(or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the service is stored.

Select a stored service

Press one of the number buttons (1 to 6).

(or)

1 Press

DAB to enter DAB search select mode.

2 Turn the volume knob to select [PRST] (preset service), then press the

knob.

3 Turn the volume knob to select a preset number, then press the knob.

To cancel, press and hold

DAB.

Analog Radio

CD/USB/iPod

Search for a station
1 Press BSRC repeatedly to select FM or AM. 2 Press S / T to search for a station automatically.
(or) Press and hold S / T until “M” flashes, then press repeatedly to search for a station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station
While listening to a station…. Press and hold one of the number buttons (1 to 6).
(or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station is stored.

Select a stored station

Press one of the number buttons (1 to 6).

(or)

1 Press

2 Turn the volume knob to select a preset number, then press the knob.

Selectable source: · KD-T922BT: CD/USB/iPod USB or iPod BT · KD-DB622BT: CD/USB · KD-X38MDBT: USB

Start playback
The source changes automatically and playback starts when you load a disc or attach a device (USB device/ iPod/iPhone) to the USB input terminal.

To Reverse/Fast-forward Select a track/file Select a folder Repeat play Random play

On the faceplate Press and hold S / T. Press S / T. Press 2J / 1K. Press 4B repeatedly. Press 3 repeatedly.

Menu Settings

1 Press and hold

to enter menu settings.

2 Turn the volume knob to select an item, then press the knob.

3 Repeat step 2 until the desired item is selected/activated.

4 Press

to exit.

To return to the previous setting item, press

· Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <http://www.jvc.net/cs/car/>
· The availability of each item vary depending on the model.

Menu items [EQ SETTING] :

[AUDIO CONTROL] :

[SOUND EFFECT] :

[DISPLAY]

[COLOR]

[TUNER SETTING] :

[BT MODE]

[REMOTE APP] :

[MIC GAIN]*1 :

[NR LEVEL]*1 :

[ECHO CANCEL]*1 :

[SYSTEM]

[CLOCK]

[ENGLISH]

[]

[ESPANOL]

[FRANCAIS] :

[DEUTSCH]*2 :

[DEMO MODE] :

Selects a preset equalizer or adjusts your own sound settings. Sets your preferred audio settings. Sets your preferred sound effect. Sets your preferred control for the display window. Sets your preferred illumination color for buttons. Settings for radio source. Settings for using a Bluetooth device. Settings for using smartphone to control this unit. Sets the sensitivity of the microphone. Adjusts the noise reduction level. Adjusts the echo cancellation delay time. Settings for this unit. Adjusts the clock. Selects language for the menu and music information. Selects language for the menu and music information. Selects language for the menu and music information. Selects language for the menu and music information. Selects language for the menu and music information. Activates or deactivates the display demonstration.

*1 Applicable only while talking on the phone. *2 Only for KD-T922BT.

Examples of some well-used settings

Subwoofer Level Setting

1 Press and hold

to enter menu settings.

2 Turn the volume knob clockwise to select [AUDIO CONTROL], then press the knob.

3 Turn the volume knob clockwise to select [SUBWOOFER SET], then press the knob.

4 Turn the volume knob clockwise to select [ON], then press the knob.
5 Turn the volume knob clockwise to select [SUB.W LEVEL], then press the knob.

6 Press the volume knob if [PRE-OUT] is shown on the display. 7 Turn the volume knob to adjust the subwoofer level, then press the knob.

Continued on the next page… 9

8 Press

to exit the setting menu.

Note: For KD-DB622BT, you need to set [SPK/PRE OUT] to [REAR/SUB.W] or [SUB.W/SUB.W] before you can make the subwoofer level settings.
Illumination Color Setting
For KD-T922BT/KD-X38MDBT, you can set your preferred illumination color for each zone.
Example: KD-T922BT

5 Turn the volume knob to choose a color, then press the knob.

· [COLOR 01] to [COLOR 49] · [USER]: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown. · [COLOR FLOW01] to [COLOR FLOW03]: Color changes at
different speeds. · [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/
[RELAX]/[SUNSET]: The selected color pattern is shown. (Selectable only when [ALL ZONE] is selected in step 4.)

6 Repeat step 4 and step 5 to set color for other zones.

7 Press

to exit.

Other Information

1 Press and hold

to enter menu settings.

2 Turn the volume knob clockwise to select [COLOR], then press the knob.

3 Press the volume knob if [PRESET] is shown on the display.
4 Turn the volume knob to choose a zone ([ALL ZONE], [ZONE 1], [ZONE 2]), then press the knob.

For playback operations of AUX and Spotify sources, refer to the INSTRUCTION MANUAL on the following website: <http://www.jvc.net/cs/car/> · The availability of each source vary depending on the model.
Note for specifications Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2 Speaker Impedance:
4 — 8 Operating Voltage:
12 V DC car battery

Bluetooth®
· Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.
· Be sure to turn on the Bluetooth function of the device to make the following operations.
· Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear panel.

(B) “[Device Name]” “VOL YES” “BACK NO” Press the volume knob to start pairing. · If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the Bluetooth device. · If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
“PAIRING COMPLETED” appears when pairing is completed and ” ” will light up when the Bluetooth connection is established.

Answer a call

Press

or the volume knob.

· To adjust the phone volume [00] to [35], turn the volume knob.

· To end a call, press and hold

or the volume knob.

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

Audio player via Bluetooth
1 Press BSRC repeatedly to select BT AUDIO. · Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.

Pair and connect a Bluetooth device for the first time
1 Press BSRC to turn on the unit. 2 Search and select the name of your receiver (“KD-T922BT”/
“KD-DB622BT”/”KD-X38MDBT”) on the Bluetooth device. 3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below.
(A) “[Device Name]” “XXXXXX” “VOL YES” “BACK NO” “XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device are the same. Press the volume knob to confirm the passkey. Operate the Bluetooth device to confirm the passkey.

To Play back/pause Select group or folder Reverse skip/Forward skip Reverse/Fast-forward Repeat play Random play

On the faceplate Press the volume knob. Press 2J / 1K. Press S / T. Press and hold S / T. Press 4B repeatedly. Press 3 repeatedly.

Instalación/Conexión
Esta sección es para los instaladores profesionales. Para fines de seguridad, deje que un profesional realice el cableado y el montaje. Consulte con un distribuidor de productos de audio para automóviles.
ADVERTENCIA
· La unidad puede utilizarse solamente con una fuente de alimentación de 12 V CC con negativo a masa. · Desconecte el terminal negativo de la batería antes de realizar el cableado y el montaje. · Para evitar un cortocircuito, no conecte el cable de la batería (amarillo) ni el cable de encendido (rojo) al chasis del
vehículo o cable de conexión a masa (negro). · Para evitar cortocircuitos:
Utilice una cinta de vinilo para aislar los cables no conectados. Asegúrese de volver a conectar a masa esta unidad al chasis del automóvil después de la instalación. Para proteger los cables, asegúrelos con abrazaderas de cables y con una cinta de vinilo, enrolle los cables que
entran en contacto con partes metálicas.

Procedimiento básico
1 Quite la llave del interruptor de encendido; después, desconecte el terminal de la batería del automóvil.
2 Conecte los cables correctamente. Consulte “Conexión del cableado” en la página 3, 4.
3 Instale la unidad en su automóvil. Consulte lo siguiente “Instalación de la unidad (montaje en el tablero)”.
4 Conecte el terminal de la batería del automóvil. 5 Pulse B SRC para encender la unidad. 6 Extraiga la placa frontal y reinicialice la unidad en menos de 5 segundos.
Consulte “Cómo reinicializar” en la página 5.
Instalación de la unidad (montaje en el tablero)

PRECAUCIÓN
· Instale esta unidad en la consola de su vehículo. No toque las partes metálicas de la unidad durante o un poco después del uso de la unidad. Las partes metálicas, tales como el disipador de calor o la carcasa, pueden estar muy calientes.
· No conecte los cables de los altavoces al chasis del vehículo, al cable de conexión a masa (negro) o en paralelo. · Conecte altavoces con una potencia máxima de más de 50 W. Si la potencia máxima de los altavoces es inferior a
50 W, cambie el ajuste [AMP GAIN] para evitar daños en los mismos. · Monte la unidad a un ángulo de menos de 30º. · Si el mazo de conductores de su vehículo no dispone de terminal de encendido, conecte el cable de encendido
(rojo) al terminal de la caja de fusibles del vehículo, el cual suministrará una alimentación de 12 V CC y podrá conectarse y desconectarse mediante la llave de encendido. · Mantenga todos los cables alejados de las partes metálicas disipadoras de calor. · Después de instalar la unidad, compruebe que las lámparas de freno, las luces intermitentes, el limpiaparabrisas, etc. funcionen satisfactoriamente. · Si se funde el fusible, en primer lugar asegúrese de que los cables no estén en contacto con el chasis del vehículo y, a continuación, reemplace el fusible usado por otro del mismo régimen.

Gancho en el lado superior

Salpicadero del automóvil

Doble las lengüetas apropiadas para retener firmemente la manga en su lugar.

Instalación de la unidad (sin manguito de montaje) 1 Retire de la unidad, el manguito de montaje y la placa embellecedora. 2 Alinee los orificios de la unidad (en ambos lados) con la ménsula de
montaje del vehículo y asegure la unidad con los tornillos (disponibles en el mercado).

KD-T922BT/KD-DB622BT:

KD-X38MDBT:

Conexión del cableado del KD-T922BT Terminal de la antena
Fusible (10 A)

Tornillo tipo autorroscante
Utilice solo los tornillos especificados. El uso de tornillos incorrectos puede dañar la unidad.

Desmontaje de la unidad KD-T922BT/KD-DB622BT:

KD-X38MDBT:

a Luz azul/amarilla: Al adaptador del mando a distancia del volante de la dirección
b Amarillo: Cable de la batería c Amarillo: A4 d Rojo: Cable de encendido e Rojo: A7
Conectores ISO

Lista de piezas (suministradas)

(A) Placa frontal (×1) (B) Placa embellecedora (×1) (C) Manguito de montaje (×1)

(D) Mazo de conductores (×1) (E) Herramienta de extracción (×2)

Patilla A4 Amarillo A5 Azul/blanco A6 Naranja/blanco A7 Rojo A8 Negro B1, B2 Púrpura ], Púrpura/negro [ B3, B4 Gris ], Gris/negro [ B5, B6 Blanco ], Blanco/negro [ B7, B8 Verde ], Verde/negro [

Color y función : Batería : Control de alimentación (12 V 350 mA) : Interruptor de control de las luces del automóvil : Encendido (ACC) : Conexión a tierra (masa) : Altavoz trasero (derecho) : Altavoz delantero (derecho) : Altavoz delantero (izquierdo) : Altavoz trasero (izquierdo)

Conexión del cableado del KD-DB622BT/KD-X38MDBT

Toma de antena DAB (conector SMB)

Fusible (10 A)

Terminal de la antena

a Luz azul/amarilla: Al adaptador del mando a distancia del volante de la dirección
b Amarillo: Cable de la batería c Amarillo: A4 d Rojo: Cable de encendido e Rojo: A7

Conectores ISO

Patilla A4 Amarillo A5 Azul/blanco A6 Naranja/blanco A7 Rojo A8 Negro B1, B2 Púrpura ], Púrpura/negro [ B3, B4 Gris ], Gris/negro [ B5, B6 Blanco ], Blanco/negro [ B7, B8 Verde ], Verde/negro [

Antes del uso
IMPORTANTE
· Antes de utilizar este producto y para asegurar su uso correcto, lea esta guía por completo. En especial, lea y observe las Advertencias y Precauciones incluidas en esta guía.
· Guarde la guía en un lugar seguro y accesible para futuras consultas.
ADVERTENCIA
No utilice ninguna función que pueda desviar su atención mientras está conduciendo el vehículo.
PRECAUCIÓN
Ajuste del volumen: · Ajuste el volumen a un nivel que le permita oír los ruidos del exterior para
impedir accidentes. &

Download

JVC Digital Media Receiver CD User Guide

Was this manual helpful?