Pioneer All-In-One DJ System Instructions

XDJ-RR
ALL-IN-ONE DJ SYSTEM
pioneerdj.com/support/
rekordbox.com/

For FAQs and other support information for this product, visit the above site.

Operating Instructions (Quick Start Guide)
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery, and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a  retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery, and recycling and thus prevent potential negative effects on the environment and human health.

K058b_A1_En

CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO  QUALIFIED SERVICE PERSONNEL.

D3-4-2-1-1_B1_En

WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.

D3-4-2-1-3_A1_En

WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment
Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

D3-4-2-1-7c*_A2_En

VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 5 cm at the rear, and 5 cm at each side).

D3-4-2-1-7d*_A1_En

This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period.

K041_A1_En

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while.  When you find it damaged, ask your nearest service center or your dealer for a replacement.

S002*_A1_En

CAUTION
The switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazards, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

When using this product, confirm the safety information shown on the bottom of the unit.

D3-4-2-2-4_B1_En

CAUTION
This product is evaluated in moderate and tropical climate conditions.

D3-8-2-1-7a_A1_En

The graphical symbol placed on the product means alternating current.
The graphical symbol placed on the product means direct current.
The graphical symbol placed on the product means Class II equipment.

D3-8-2-4_A1_En

Recording equipment and copyright: Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the country in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the right owners.

K018_A1_En

How to read this manual

• Thank you for purchasing this Pioneer DJ product.
  This manual briefly describes the names of the parts of this unit, how to connect this unit with external devices, and how to operate this unit.
  For more information on how to use this unit, refer to the Operating Instructions that is available on the Pioneer DJ website. The warranty on the last page of this manual.  Be careful not to lose it.
• The specifications described in this manual and the design and specifications of the hardware may be modified without notice for product improvement and may differ from the descriptions in this manual.

Before start

Features

This unit is an integrated DJ player/DJ mixer system equipped with Pioneer DJ CDJ and DJM series technology, a global standard in club equipment. You can enjoy full-scale  DJ performances using tracks stored on USB devices, computers, or mobile devices.

Viewing the manuals

Viewing the Operating Instructions for this unit

1. Launch a web browser on a computer and access the following Pioneer DJ site.
   pioneerdj.com
2. Click [Support].
3. Click [FIND TUTORIAL & MANUALS].
4. Click [XDJ-RR] in the [CONTROLLER] category.
5. Click the desired language from the Operating Instructions list.
   Download the manual as necessary.

Viewing the rekordbox introduction
In rekordbox introduction, you’ll find information on rekordbox including how to set it up.

1. Launch a web browser on the computer and access the site below.
   rekordbox.com/manual
2. Click the required language of the rekordbox introduction.

Accessories

Caution
The license key cannot be reissued. Be careful not to lose it.

Preparing the software

Music management software, rekordbox, and driver software are not included with this product. Access the rekordbox site and Pioneer DJ support site, and download the rekordbox software and driver software respectively. !
• Prepare a computer, network devices, etc., that are required to access the internet.

rekordbox and rekordbox dj

• rekordbox is a composite software that enables track management and DJ performances. Music files on computers and mobile devices can be managed (analysis, setting, creation, and history storage) with the music management software rekordbox. Excellent DJ performances can be achieved by using the music files managed by rekordbox together with this unit.
• Enter the license key included with this product to use “rekordbox DJ”, the DJ performance function of rekordbox.
• For information on the latest system requirements, compatibility, and supported operating systems of rekordbox, see [System Requirements] from [Support] on the Pioneer DJ website (rekordbox.com). rekordbox.com
• Operation on all computers is not guaranteed, even if the computers meet the required operating environment.
• The CPU and hard disc may not provide sufficient processing capabilities depending on the power-saving setting, etc. on the computer. Confirm that the computer meets the conditions to provide constant high-performance (for example, connecting the computer to a power outlet to maintain a stable power supply) especially when using rekordbox on a laptop.
• A separate contract with an Internet service provider and payment of the utilization fee is required to access the Internet.
• Use the latest version/service pack of the operating system.

♦ Obtaining the rekordbox software

1. Launch a web browser on the computer and access the rekordbox.com site below.
   rekordbox.com
2. Click [Download] in the [Download] menu of “rekordbox.com”.
   The rekordbox download page is displayed.
3. Click the download banner.
   Downloading of rekordbox starts.

♦ Installation (for Mac)

Do not connect this unit to a computer until installation and initial setup have been completed.

• Close all the applications running on the computer before installing the software.

1. Unzip the downloaded rekordbox software file.
2. Double-click the rekordbox software to launch the installer.
3. Read the license agreement, and select [Agree] if you agree to the terms.
   Proceed by following the instructions on the screen.
   • If you do not agree to the contents of the license agreement, click [Disagree] to cancel the installation.
4. If the installation completed screen appears, click [Close] to close the rekordbox installer.

♦ Installation (for Windows)
Do not connect this unit to a computer until installation and initial setup have been completed.

• Log in to the computer as the administrator before installation.
• Close all the applications running on the computer before installing the software.

1. Unzip the downloaded rekordbox software file.
2. Double-click the rekordbox software to launch the installer.
3. Read the license agreement, select [I agree to the license terms and conditions] if you agree to the terms, and click [Next].
After the installation destination is specified, the installation starts.

• If you do not agree to the license agreement, click [Close] to cancel the installation.

4. If the installation completed screen appears, click [Close] to close the rekordbox installer.

♦ rekordbox (iOS/Android)
Tracks managed by rekordbox can be played by connecting the mobile device on which rekordbox (iOS/Android) is installed via USB. For the supported devices, see the Pioneer DJ website (rekordbox.com).

• For details on installing rekordbox (iOS/Android), see the Pioneer DJ website (rekordbox.com).

Driver software

♦Audio driver software
• Dedicated driver software is required for outputting audio signals from a computer.

♦ USB (LINK Export) connections driver software for rekordbox (Mac/Windows)

• Dedicated driver software is required for connecting the unit and rekordbox (Mac/Windows) via USB (LINK Export).

♦ Obtaining the driver software
1. Launch a web browser on a computer and access the following Pioneer DJ support site.
pioneerdj.com/support/

• For information on installing the driver software, see the Pioneer DJ support site or the Operating Instructions for this product that is available on the support site.

Supported media

This unit can play music files stored on USB mass storage devices (external hard disks, portable flash memory devices, etc.).
File systems:  FAT16, FAT32, HFS+ (NTFS is not supported.)

• Information such as cue points loops points and hot cues can be stored via USB.
• Depending on the USB device you are using, you may not achieve the expected performance.
• There is no guarantee that all USB devices will operate with this unit.
  For more information, refer to the Operating Instructions that is available on the Pioneer DJ support site.

Part names

For more information, refer to the Operating Instructions that is available on the Pioneer DJ support site.

1. Power section (page 6 )
2. USB section (page 6 ) 
3. Deck section (page 6 )
4. Browse section (page 7 )
5. Mixer/effect section (page 7 )

Power section

1. switch
   This switch is used to switch between standby and on.

USB section

1. USB 1, 2 slots
2. MASTER REC (WAKE UP) button
3. TRACK MARK button
4. USB1,2 STOP buttons
5. USB 1, 2 indicators

Deck section

Browse section

1. BROWSE (SEARCH) button
2.  TAG LIST button
3. INFO button
4. MENU (UTILITY) button
5.  DECK1/2 button
6.  BACK button
7.  TAG TRACK/REMOVE button
8.  Rotary selector
9. Main display
10.  LOAD 1/2 button
11.  QUANTIZE button
12.  TIME MODE (AUTO CUE) button
13.  USB1,2 buttons
14.  MIDI button
15. rekordbox button

Mixer/effect section

Connections

• Connect the power cord to a power outlet after all the connections are completed.
• Turn off this unit and disconnect the power cord from the power outlet before connecting components or changing the connections.
• Refer to the operating instructions for the components to be connected.
• Be sure to use the included power cord and AC adapter.
• Connect this unit and the computer directly using the included USB cable.

Connecting to the input/output terminals

Rear panel, front panel

1. PHONES terminals
2. Kensington security slot
3. MASTER 1 terminals
   • Be careful not to accidentally insert the power cord of another unit to the [MASTER 1] terminal.
   • Do not connect a terminal that can supply phantom power to the [MASTER 1] terminal.
4.  MASTER 2 terminals
5. USB terminal
   For connecting to XDJ-RR, be sure to use the USB cable supplied with the unit for optimum performance.
6. AUX terminal
7. MIC terminal
8. DC IN
9. Cord hook

Basic style
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer. For rekordbox operations, see the rekordbox (Mac/Windows) user’s manual from the [Help] menu of rekordbox (Mac/Windows).

♦ PRO DJ LINK (USB Export)
You can play music files prepared using rekordbox on this unit and also use the settings such as playlists, cues, loops, and hot cues set by rekordbox. Store music files and settings in a memory device (flash memory, hard disk, etc.) and connect it to this unit. Using PRO DJ LINK eliminates the need to bring a computer into the DJ booth.

1. Connect headphones to the [PHONES] terminal.
2. Connect powered speakers, power amplifiers, etc. to the [MASTER 1] or [MASTER 2] terminal.
3. Connect this unit to the AC adapter, and insert the power plug into an outlet.
4.Press the [] switch on the rear panel of this unit to turn this unit on.
5. Turn on the devices connected to the output terminals (such as a power amplifier or powered speakers).
• If a microphone, DJ player or other external device is connected to the input terminals, turn on the connected device.

♦ PRO DJ LINK (LINK Export)

• When a computer on which rekordbox is installed is taken into the DJ booth and connected to this unit using a USB cable, tracks in rekordbox can be selected and played.  You can use the information such as playlists, cues,  loops, and hot cues that have been set with rekordbox for performances.
• When a mobile device on which rekordbox (iOS/Android) is installed is connected using a USB cable, tracks in rekordbox can be selected and played. This makes it possible to use the information such as playlists, cues, loops, and hot cues that have been set ahead of time with rekordbox for performances.
• Install the driver software before connecting a USB device to a computer on which rekordbox (Mac/Windows) is installed. For details, see Driver software on page 5.

Supported iPhone and iPod

• Made for iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,iPhone 5c, iPhone 5, iPod touch (5th and 6th generation).
• For the latest supported devices, see the following Pioneer DJ website. rekordbox.com

1. Connect the unit and the computer by using a USB cable, or connect the unit and the mobile device by inserting the USB cable in the USB device insertion slot.
2. Connect headphones to the [PHONES] terminal.
3.  Connect powered speakers, power amplifiers, etc. to the [MASTER 1] or [MASTER 2] terminal.
4.  Turn on the power of the computer or the mobile device, and then launch rekordbox.
5. Connect this unit to the AC adapter, and insert the power plug into an outlet.
6.  Press the [] switch on the rear panel of this unit to turn this unit on.
7.  Turn on the devices connected to the output terminals (such as a power amplifier or powered speakers).
   ♦ If a microphone, DJ player, or other external device is connected to the input terminals, turn on the connected device.

Operation

For more information, refer to the Operating Instructions that is available on the Pioneer DJ support site.

Playback

This section describes basic track selection operations and how to switch the screen.

Playing music files on media connected to this unit
1. Open the USB slot cover and connect a USB device.
2. Press a media button (either [USB1] or [USB2]).
Tracks and folders on the connected USB device are displayed in a list.
You can switch the device from which to display the contents to the main display.
[USB1]: Displays the music files stored on the USB device connected to USB1 and mobile devices on which rekordbox is installed.
[USB2]: Displays the music files stored on the USB device connected to USB2 and mobile devices on which rekordbox is installed.

3. Rotate the rotary selector.
Move the cursor to select an item.

• Press the rotary selector to move to a lower level in the folder. Press the [BACK] button to return to the level above.
•  When the [BACK] button is pressed for over 1 second or the medium button for the medium being browsed is pressed, the display moves to the topmost level.

4. Use the rotary selector to select the track you want to load.
If the rotary selector is pressed while the cursor is placed over a track title, the track menu is displayed.
5. Press the [LOAD1, 2] button.
The track is loaded into the specified deck of the unit and begins playing.

• When a track is loaded while paused, press the [ (PLAY/PAUSE)] button to start playback.
• When autocue is turned on, the disc pauses at the audio start position. In this case, press the [
• (PLAY/PAUSE)] to start playback.

♦ If the medium contains the rekordbox library
The rekordbox library is displayed if it is stored in the connected USB device.

• Music files are displayed by categories (album, artist, etc.) set with rekordbox.

Playing the rekordbox library on a computer or mobile device

Music files are displayed by categories (album, artist, etc.) set with rekordbox.

1. Press the [rekordbox] button.
   The library for rekordbox (EXPORT mode) appears on the main display of this unit.
   ♦ Press the [USB] button to select a mobile device connected by USB.
2. Rotate the rotary selector.
   Move the cursor to select an item.
3. Use the rotary selector to select the track you want to load.
   If the rotary selector is pressed while the cursor is placed over a track title, the track menu is displayed.
4. Press the [LOAD1, 2] button.
   The track is loaded into the specified deck of the unit and begins playing.

Outputting sound

Check that the unit and the external devices are properly connected before outputting sound.
  Connecting to the input/output terminals (p. 9 )
Set the volume of the power amplifier or powered speakers connected to the [MASTER 1] and [MASTER 2] terminals to an appropriate level. Note that loud sound may be output if the volume is set too high.

Outputting the sound of channel 1 [CH1]

To output the sound for [CH 2] (channel 2), follow the procedure below replacing [CH1] with [CH 2].

1.  Rotate the [TRIM] control in the [CH1] section clockwise.
   Adjust the level of sound input to the [CH1] terminal.
   The [CH1] level indicator lights up when audio signals are properly input to [CH1].
   Rotate the [TRIM] control to confirm that the orange indicator lights up at the highest volume for the track. Make sure that the red indicator does not lights up, or the sound may be distorted.
2. Move the [CH1] channel fader to the backside.
   The level of the sound output from the [CH1] terminals is adjusted.
3. Set the [CROSS FADER CURVE THRU,  ]
   switch (the crossfader curve selector switch).
4. Set the crossfader.
   Switch the channel whose sound is output from the speakers.
   — Left edge: The [CH1] sound is output.
   — Center position: The sound of [CH1] and [CH 2] is mixed and output.
   — Right edge: The [CH 2] sound is output.
   ♦ This operation is not necessary when the [CROSS FADER CURVE (THRU, )] switch (crossfader curve selector switch) is set to [THRU].
5. Rotate the [MASTER LEVEL] control clockwise.
   Sound is output from the speakers.
   The master level indicator lights up.
   Rotate the [MASTER LEVEL] control to confirm that the orange indicator lights up at the highest volume for the track.
   ♦ Make sure that the master level indicator does not light up, or the sound may be distorted.

Monitoring sound with headphones

1. Connect headphones to the [PHONES] terminal.
2. Press the [CUE] button of the channel to be monitored.
3. Rotate the [HEADPHONES MIXING] control.
   Adjust the balance of the volume between the channel selected with the
   [CUE] button and [MASTER].
4. Rotate the [HEADPHONES LEVEL] control.
   Adjust the volume of the headphones.

Setting monitor output

The [MONO SPLIT, STEREO] setting can be changed in the settings of the [UTILITY] screen.
♦ [MONO SPLIT]: Outputs the sound of the channel selected with the [CUE] button to [L] and the sound of [MASTER] to [R].
♦ [STEREO]: Outputs the sound selected with the [CUE] button in stereo.
For details on the functions, see the Operating Instructions for this product.

Turning off the system

1. Press the [USB STOP] button for over 2 seconds.
   Do not disconnect the USB device or turn off this unit while the USB indicator is lit or flashing.
   Doing so could delete the management data of this unit and damage the USB device, resulting in unreadable data.
2. Disconnect the USB device.
3. Close the USB slot cover.
4. Press the [] switch.
   This unit turns off.

Additional information

Troubleshooting

♦ Improper operation is often mistaken for trouble or a malfunction that occurred in the device. If something is wrong with this unit, check the following issues, and also access the following Pioneer DJ support site and check [FAQ] for [XDJ-RR].
pioneerdj.com/support/
Some problems occur due to the connected components. If the problem cannot be resolved after checking the connected components, contact the service center or your dealer for repairs.
♦ The unit may not operate properly due to static electricity or other external influences. In such cases, disconnect the power cord and connect it again to restore normal operation.

Power supply

Audio output

Display

Functions and operations

DJ software

Error messages

When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase.

Changing the settings

For more information, refer to the Operating Instructions that is available on the Pioneer DJ support site.

Trademarks and registered trademarks

• Pioneer DJ is a trademark of Pioneer DJ Corporation and is used under license. rekordbox is a registered trademark or trademark of Pioneer DJ Corporation.
• Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
• Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
  
• iPhone, iPod, iPod touch, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. ! Android is a trademark of Google Inc.
• iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.
• ASIO is a trademark of Steinberg Media Technologies GmbH.
• The names of companies and products mentioned herein are trademarks or registered trademarks of their respective owners. ™

Software license notice

• This software is based in part on the work of the Independent JPEG Group.

Using MP3 files
This product has been licensed for nonprofit use. This product has not been licensed for commercial purposes (for profit-making use), such as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (corporate networks), or other types of networks or distributing of electronic information (online digital music distribution services). You need to acquire the corresponding licenses for such uses. For details, see http://www.mp3licensing.com.

Cautions on copyrights

rekordbox restrict playback and duplication of copyright-protected music contents.

• When coded data, etc., for protecting the copyright is embedded in the music contents, it may not be possible to operate the program normally.
• When rekordbox detects that coded data, etc., for protecting the copyright is embedded in the music contents, processing (playback, reading, etc.) may stop.
• Music recorded from CDs, etc., is protected by the copyright laws of individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is used legally.
• When handling music downloaded from the Internet, etc., it is the full responsibility of the person who has downloaded the music to ensure that it is used in accordance with the contract concluded with the download site.

Specifications

AC adapter
Power requirements ………….. AC 100 V to 240 V, 50 Hz/60 Hz
Rated current …………………………… 0.9 A
Rated output …………………………. DC 12 V, 3 A
Power consumption (standby) ……………….. 0.4 W
General – Main Unit
Power consumption …………………….. DC 12 V, 2 500 mA
Main unit weight ……………………………………5.2 kg
Max. dimensions ………………. 625 mm (W) × 74.2 mm (H) × 388.5 mm (D)
Tolerable operating temperature …………..+5 °C to +35 °C
Tolerable operating humidity ……………… 5 % to 85 % (no condensation)
Audio Section
Sampling rate ……………………………44.1 kHz
A/D, D/A converter ……………………..24-bit
Frequency characteristic
USB, AUX (0 dB/12 dB), MIC …………………….. 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB ….…………………………………….. 112 dB
AUX (LINE) ……………………………….. 96 dB
AUX (PORTABLE) …………………. 90 dB
MIC …………………………………………. 81 dB
Total harmonic distortion (20 Hz to 20 kHzBW)
USB ..…………………………….0.003 %
Standard input level / Input impedance
AUX (LINE) …………………………..–12 dBu/47 kW
AUX (PORTABLE) …………………………..–24 dBu/47 kW
MIC ……………………… –57 dBu/3 kW
Standard output level / Load impedance / Output impedance
MASTER 1 …………………..+6 dBu/10 k W/390 W or less
MASTER 2 …………………………+2 dBu/10 k W/1 k W or less
PHONES ………………………..+8 dBu/32 W/1 W or less
Rated output level / Load impedance
MASTER 1 …………………………..+24 dBu/10 k W
MASTER 2 ………………………+20 dBu/10 k W
Channel equalizer characteristic
HI .…………………………..–∞ dB to +6 dB (20 kHz)
MID ..………………….. –∞ dB to +6 dB (1 kHz)
LOW …………………… –∞ dB to +6 dB (20 Hz)
Microphone equalizer characteristic
HI ..………………–12 dB to +12 dB (10 kHz)
LOW …………………–12 dB to +12 dB (100 Hz)
Input / Output terminals
MIC input terminal
XLR connector & 1/4” TRS jack ………………..1 set
AUX input terminal
RCA pin jacks ……………………………..1 set
MASTER 1 output terminal
XLR connector………………………1 set
MASTER 2 output terminal
RCA pin jacks …………………………….1 set
PHONES output terminal 1/4” stereo phone jack …………….1 set
3.5 mm stereo mini jack ……………….1 set
USB terminals
A type ……………………………………. 2 sets
Power supply……………………. 5 V/1 A or less
B type …………………………1 set

— Be sure to use the [MASTER 1] terminals for balanced output. If they are connected to an unbalanced input (such as RCA) with an XLR to RCA converter cable (or converter adapter), etc., the sound quality may be lowered or noise may occur. Use the [MASTER 2] terminals for an unbalanced input (such as RCA).
— The specifications and design of this product are subject to change without notice.

• © 2018 Pioneer DJ Corporation. All rights reserved.